DONE
这个提交包含在:
20
Exp7/Counter.v
普通文件
20
Exp7/Counter.v
普通文件
@ -0,0 +1,20 @@
|
||||
module Counter(
|
||||
input wire func,
|
||||
input wire rst,
|
||||
input wire clk,
|
||||
output reg [0:3] led
|
||||
);
|
||||
reg [0:3] counter;
|
||||
|
||||
always @(posedge clk or negedge rst) begin
|
||||
if (~rst) begin
|
||||
counter <= func ? 4'b1111 : 4'b0000;
|
||||
end else begin
|
||||
counter <= func ? (counter - 1) : (counter + 1);
|
||||
end
|
||||
end
|
||||
|
||||
always @(*) begin
|
||||
led = ~counter;
|
||||
end
|
||||
endmodule
|
||||
21
Exp7/Counter.v.bak
普通文件
21
Exp7/Counter.v.bak
普通文件
@ -0,0 +1,21 @@
|
||||
module Counter(
|
||||
input wire func,
|
||||
input wire rst,
|
||||
input wire clk,
|
||||
output reg [0:3] led
|
||||
);
|
||||
|
||||
reg [0:3] counter;
|
||||
|
||||
always @(posedge clk or negedge rst) begin
|
||||
if (~rst) begin
|
||||
counter <= func ? 4'b1111 : 4'b0000;
|
||||
end else begin
|
||||
counter <= func ? (counter - 1) : (counter + 1);
|
||||
end
|
||||
end
|
||||
|
||||
always @(*) begin
|
||||
led = ~counter;
|
||||
end
|
||||
endmodule
|
||||
31
Exp7/Frequency.qpf
普通文件
31
Exp7/Frequency.qpf
普通文件
@ -0,0 +1,31 @@
|
||||
# -------------------------------------------------------------------------- #
|
||||
#
|
||||
# Copyright (C) 2025 Altera Corporation. All rights reserved.
|
||||
# Your use of Altera Corporation's design tools, logic functions
|
||||
# and other software and tools, and any partner logic
|
||||
# functions, and any output files from any of the foregoing
|
||||
# (including device programming or simulation files), and any
|
||||
# associated documentation or information are expressly subject
|
||||
# to the terms and conditions of the Altera Program License
|
||||
# Subscription Agreement, the Altera Quartus Prime License Agreement,
|
||||
# the Altera IP License Agreement, or other applicable license
|
||||
# agreement, including, without limitation, that your use is for
|
||||
# the sole purpose of programming logic devices manufactured by
|
||||
# Altera and sold by Altera or its authorized distributors. Please
|
||||
# refer to the Altera Software License Subscription Agreements
|
||||
# on the Quartus Prime software download page.
|
||||
#
|
||||
# -------------------------------------------------------------------------- #
|
||||
#
|
||||
# Quartus Prime
|
||||
# Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
# Date created = 11:03:27 January 16, 2026
|
||||
#
|
||||
# -------------------------------------------------------------------------- #
|
||||
|
||||
QUARTUS_VERSION = "25.1"
|
||||
DATE = "11:03:27 January 16, 2026"
|
||||
|
||||
# Revisions
|
||||
|
||||
PROJECT_REVISION = "Frequency"
|
||||
92
Exp7/Frequency.qsf
普通文件
92
Exp7/Frequency.qsf
普通文件
@ -0,0 +1,92 @@
|
||||
# -------------------------------------------------------------------------- #
|
||||
#
|
||||
# Copyright (C) 2025 Altera Corporation. All rights reserved.
|
||||
# Your use of Altera Corporation's design tools, logic functions
|
||||
# and other software and tools, and any partner logic
|
||||
# functions, and any output files from any of the foregoing
|
||||
# (including device programming or simulation files), and any
|
||||
# associated documentation or information are expressly subject
|
||||
# to the terms and conditions of the Altera Program License
|
||||
# Subscription Agreement, the Altera Quartus Prime License Agreement,
|
||||
# the Altera IP License Agreement, or other applicable license
|
||||
# agreement, including, without limitation, that your use is for
|
||||
# the sole purpose of programming logic devices manufactured by
|
||||
# Altera and sold by Altera or its authorized distributors. Please
|
||||
# refer to the Altera Software License Subscription Agreements
|
||||
# on the Quartus Prime software download page.
|
||||
#
|
||||
# -------------------------------------------------------------------------- #
|
||||
#
|
||||
# Quartus Prime
|
||||
# Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
# Date created = 11:03:27 January 16, 2026
|
||||
#
|
||||
# -------------------------------------------------------------------------- #
|
||||
#
|
||||
# Notes:
|
||||
#
|
||||
# 1) The default values for assignments are stored in the file:
|
||||
# Frequency_assignment_defaults.qdf
|
||||
# If this file doesn't exist, see file:
|
||||
# assignment_defaults.qdf
|
||||
#
|
||||
# 2) Intel recommends that you do not modify this file. This
|
||||
# file is updated automatically by the Quartus Prime software
|
||||
# and any changes you make may be lost or overwritten.
|
||||
#
|
||||
# -------------------------------------------------------------------------- #
|
||||
|
||||
|
||||
set_global_assignment -name FAMILY "MAX 10"
|
||||
set_global_assignment -name DEVICE 10M02SCM153I7G
|
||||
set_global_assignment -name TOP_LEVEL_ENTITY Frequency
|
||||
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 25.1STD.0
|
||||
set_global_assignment -name PROJECT_CREATION_TIME_DATE "11:03:27 JANUARY 16, 2026"
|
||||
set_global_assignment -name LAST_QUARTUS_VERSION "25.1std.0 Lite Edition"
|
||||
set_global_assignment -name PROJECT_OUTPUT_DIRECTORY output_files
|
||||
set_global_assignment -name MIN_CORE_JUNCTION_TEMP "-40"
|
||||
set_global_assignment -name MAX_CORE_JUNCTION_TEMP 100
|
||||
set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 256
|
||||
set_global_assignment -name EDA_SIMULATION_TOOL "Questa Altera FPGA (Verilog)"
|
||||
set_global_assignment -name EDA_TIME_SCALE "1 ps" -section_id eda_simulation
|
||||
set_global_assignment -name EDA_OUTPUT_DATA_FORMAT "VERILOG HDL" -section_id eda_simulation
|
||||
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_timing
|
||||
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_symbol
|
||||
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_signal_integrity
|
||||
set_global_assignment -name EDA_GENERATE_FUNCTIONAL_NETLIST OFF -section_id eda_board_design_boundary_scan
|
||||
set_global_assignment -name ENABLE_OCT_DONE ON
|
||||
set_global_assignment -name USE_CONFIGURATION_DEVICE ON
|
||||
set_global_assignment -name CRC_ERROR_OPEN_DRAIN OFF
|
||||
set_global_assignment -name RESERVE_ALL_UNUSED_PINS_WEAK_PULLUP "AS INPUT TRI-STATED"
|
||||
set_global_assignment -name STRATIX_DEVICE_IO_STANDARD "3.3-V LVTTL"
|
||||
set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -rise
|
||||
set_global_assignment -name OUTPUT_IO_TIMING_NEAR_END_VMEAS "HALF VCCIO" -fall
|
||||
set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -rise
|
||||
set_global_assignment -name OUTPUT_IO_TIMING_FAR_END_VMEAS "HALF SIGNAL SWING" -fall
|
||||
set_global_assignment -name VERILOG_FILE Frequency.v
|
||||
set_global_assignment -name VERILOG_FILE Counter.v
|
||||
set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
|
||||
set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top
|
||||
set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top
|
||||
set_global_assignment -name VERILOG_FILE Seg.v
|
||||
set_location_assignment PIN_J5 -to clk_12MHz
|
||||
set_location_assignment PIN_J9 -to rst
|
||||
set_location_assignment PIN_E1 -to segment_led_1[0]
|
||||
set_location_assignment PIN_D2 -to segment_led_1[1]
|
||||
set_location_assignment PIN_K2 -to segment_led_1[2]
|
||||
set_location_assignment PIN_J2 -to segment_led_1[3]
|
||||
set_location_assignment PIN_G2 -to segment_led_1[4]
|
||||
set_location_assignment PIN_F5 -to segment_led_1[5]
|
||||
set_location_assignment PIN_G5 -to segment_led_1[6]
|
||||
set_location_assignment PIN_L1 -to segment_led_1[7]
|
||||
set_location_assignment PIN_E2 -to segment_led_1[8]
|
||||
set_location_assignment PIN_A3 -to segment_led_2[0]
|
||||
set_location_assignment PIN_A2 -to segment_led_2[1]
|
||||
set_location_assignment PIN_P2 -to segment_led_2[2]
|
||||
set_location_assignment PIN_P1 -to segment_led_2[3]
|
||||
set_location_assignment PIN_N1 -to segment_led_2[4]
|
||||
set_location_assignment PIN_C1 -to segment_led_2[5]
|
||||
set_location_assignment PIN_C2 -to segment_led_2[6]
|
||||
set_location_assignment PIN_R2 -to segment_led_2[7]
|
||||
set_location_assignment PIN_B1 -to segment_led_2[8]
|
||||
set_instance_assignment -name PARTITION_HIERARCHY root_partition -to | -section_id Top
|
||||
39
Exp7/Frequency.v
普通文件
39
Exp7/Frequency.v
普通文件
@ -0,0 +1,39 @@
|
||||
module Frequency(
|
||||
input wire clk_12MHz,
|
||||
input wire rst,
|
||||
output wire [8:0] segment_led_1,
|
||||
output wire [8:0] segment_led_2
|
||||
);
|
||||
reg [23:0] div_counter;
|
||||
reg clk_1Hz;
|
||||
|
||||
always @(posedge clk_12MHz or negedge rst) begin
|
||||
if (~rst) begin
|
||||
div_counter <= 24'd0;
|
||||
clk_1Hz <= 1'b0;
|
||||
end else begin
|
||||
if (div_counter == 24'd5_999_999) begin
|
||||
div_counter <= 24'd0;
|
||||
clk_1Hz <= ~clk_1Hz;
|
||||
end else begin
|
||||
div_counter <= div_counter + 1'b1;
|
||||
end
|
||||
end
|
||||
end
|
||||
|
||||
wire [0:3] counter_out;
|
||||
|
||||
Counter u_counter(
|
||||
.func(1'b1),
|
||||
.rst(rst),
|
||||
.clk(clk_1Hz),
|
||||
.led(counter_out)
|
||||
);
|
||||
|
||||
Seg u_seg(
|
||||
.seg_data_1(counter_out),
|
||||
.seg_data_2(4'b0000),
|
||||
.segment_led_1(segment_led_1),
|
||||
.segment_led_2(segment_led_2)
|
||||
);
|
||||
endmodule
|
||||
3
Exp7/Frequency.v.bak
普通文件
3
Exp7/Frequency.v.bak
普通文件
@ -0,0 +1,3 @@
|
||||
module Frequency();
|
||||
|
||||
endmodule
|
||||
31
Exp7/Seg.v
普通文件
31
Exp7/Seg.v
普通文件
@ -0,0 +1,31 @@
|
||||
module Seg
|
||||
(
|
||||
input wire [0:3] seg_data_1, //四位输入数据信号
|
||||
input wire [3:0] seg_data_2, //四位输入数据信号
|
||||
output wire [0:8] segment_led_1, //数码管 1,MSB~LSB = SEG,DP,G,F,E,D,C,B,A
|
||||
output wire [0:8] segment_led_2 //数码管 2,MSB~LSB = SEG,DP,G,F,E,D,C,B,A
|
||||
);
|
||||
reg[8:0] seg [15:0]; //存储 7 段数码管译码数据
|
||||
|
||||
initial begin
|
||||
seg[0] = 9'h3f; // 0
|
||||
seg[1] = 9'h06; // 1
|
||||
seg[2] = 9'h5b; // 2
|
||||
seg[3] = 9'h4f; // 3
|
||||
seg[4] = 9'h66; // 4
|
||||
seg[5] = 9'h6d; // 5
|
||||
seg[6] = 9'h7d; // 6
|
||||
seg[7] = 9'h07; // 7
|
||||
seg[8] = 9'h7f; // 8
|
||||
seg[9] = 9'h6f; // 9
|
||||
seg[10]= 9'h77; // A
|
||||
seg[11]= 9'h7C; // b
|
||||
seg[12]= 9'h39; // C
|
||||
seg[13]= 9'h5e; // d
|
||||
seg[14]= 9'h79; // E
|
||||
seg[15]= 9'h71; // F
|
||||
end
|
||||
|
||||
assign segment_led_1 = seg[seg_data_1];
|
||||
assign segment_led_2 = seg[seg_data_2];
|
||||
endmodule
|
||||
29
Exp7/Seg.v.bak
普通文件
29
Exp7/Seg.v.bak
普通文件
@ -0,0 +1,29 @@
|
||||
module Seg
|
||||
(
|
||||
input wire [0:3] seg_data_1, //四位输入数据信号
|
||||
input wire [3:0] seg_data_2, //四位输入数据信号
|
||||
output wire [0:8] segment_led_1, //数码管 1,MSB~LSB = SEG,DP,G,F,E,D,C,B,A
|
||||
output wire [0:8] segment_led_2 //数码管 2,MSB~LSB = SEG,DP,G,F,E,D,C,B,A
|
||||
);
|
||||
reg[8:0] seg [15:0]; //存储 7 段数码管译码数据
|
||||
initial
|
||||
begin
|
||||
seg[0] = 9'h3f; // 0
|
||||
seg[1] = 9'h06; // 1
|
||||
seg[3] = 9'h4f; // 3
|
||||
seg[4] = 9'h66; // 4
|
||||
seg[5] = 9'h6d; // 5
|
||||
seg[6] = 9'h7d; // 6
|
||||
seg[7] = 9'h07; // 7
|
||||
seg[8] = 9'h7f; // 8
|
||||
seg[9] = 9'h6f; // 9
|
||||
seg[10]= 9'h77; // A
|
||||
seg[11]= 9'h7C; // b
|
||||
seg[12]= 9'h39; // C
|
||||
seg[13]= 9'h5e; // d
|
||||
seg[14]= 9'h79; // E
|
||||
seg[15]= 9'h71; // F
|
||||
end
|
||||
assign segment_led_1 = seg[seg_data_1];
|
||||
assign segment_led_2 = seg[seg_data_1 + 1];
|
||||
endmodule
|
||||
二进制
Exp7/db/.cmp.kpt
普通文件
二进制
Exp7/db/.cmp.kpt
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.(0).cnf.cdb
普通文件
二进制
Exp7/db/Frequency.(0).cnf.cdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.(0).cnf.hdb
普通文件
二进制
Exp7/db/Frequency.(0).cnf.hdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.(1).cnf.cdb
普通文件
二进制
Exp7/db/Frequency.(1).cnf.cdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.(1).cnf.hdb
普通文件
二进制
Exp7/db/Frequency.(1).cnf.hdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.(2).cnf.cdb
普通文件
二进制
Exp7/db/Frequency.(2).cnf.cdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.(2).cnf.hdb
普通文件
二进制
Exp7/db/Frequency.(2).cnf.hdb
普通文件
二进制文件未显示。
7
Exp7/db/Frequency.asm.qmsg
普通文件
7
Exp7/db/Frequency.asm.qmsg
普通文件
@ -0,0 +1,7 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768534584325 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768534584325 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 11:36:24 2026 " "Processing started: Fri Jan 16 11:36:24 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768534584325 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1768534584325 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off Frequency -c Frequency " "Command: quartus_asm --read_settings_files=off --write_settings_files=off Frequency -c Frequency" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1768534584325 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1768534584397 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1768534584455 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1768534584458 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "342 " "Peak virtual memory: 342 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768534584531 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 11:36:24 2026 " "Processing ended: Fri Jan 16 11:36:24 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768534584531 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768534584531 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768534584531 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1768534584531 ""}
|
||||
二进制
Exp7/db/Frequency.asm.rdb
普通文件
二进制
Exp7/db/Frequency.asm.rdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.asm_labs.ddb
普通文件
二进制
Exp7/db/Frequency.asm_labs.ddb
普通文件
二进制文件未显示。
5
Exp7/db/Frequency.cbx.xml
普通文件
5
Exp7/db/Frequency.cbx.xml
普通文件
@ -0,0 +1,5 @@
|
||||
<?xml version="1.0" ?>
|
||||
<LOG_ROOT>
|
||||
<PROJECT NAME="Frequency">
|
||||
</PROJECT>
|
||||
</LOG_ROOT>
|
||||
二进制
Exp7/db/Frequency.cmp.bpm
普通文件
二进制
Exp7/db/Frequency.cmp.bpm
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.cmp.cdb
普通文件
二进制
Exp7/db/Frequency.cmp.cdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.cmp.hdb
普通文件
二进制
Exp7/db/Frequency.cmp.hdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.cmp.idb
普通文件
二进制
Exp7/db/Frequency.cmp.idb
普通文件
二进制文件未显示。
61
Exp7/db/Frequency.cmp.logdb
普通文件
61
Exp7/db/Frequency.cmp.logdb
普通文件
@ -0,0 +1,61 @@
|
||||
v1
|
||||
IO_RULES,NUM_CLKS_NOT_EXCEED_CLKS_AVAILABLE,INAPPLICABLE,IO_000002,Capacity Checks,Number of clocks in an I/O bank should not exceed the number of clocks available.,Critical,No Global Signal assignments found.,,I/O,,
|
||||
IO_RULES,NUM_PINS_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000001,Capacity Checks,Number of pins in an I/O bank should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,NUM_VREF_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000003,Capacity Checks,Number of pins in a Vrefgroup should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,IO_BANK_SUPPORT_VCCIO,INAPPLICABLE,IO_000004,Voltage Compatibility Checks,The I/O bank should support the requested VCCIO.,Critical,No IOBANK_VCCIO assignments found.,,I/O,,
|
||||
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VREF,INAPPLICABLE,IO_000005,Voltage Compatibility Checks,The I/O bank should not have competing VREF values.,Critical,No VREF I/O Standard assignments found.,,I/O,,
|
||||
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VCCIO,PASS,IO_000006,Voltage Compatibility Checks,The I/O bank should not have competing VCCIO values.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,CHECK_UNAVAILABLE_LOC,PASS,IO_000007,Valid Location Checks,Checks for unavailable locations.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,CHECK_RESERVED_LOC,INAPPLICABLE,IO_000008,Valid Location Checks,Checks for reserved locations.,Critical,No reserved LogicLock region found.,,I/O,,
|
||||
IO_RULES,OCT_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000047,I/O Properties Checks for One I/O,On Chip Termination and Slew Rate should not be used at the same time.,Critical,No Slew Rate assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000046,I/O Properties Checks for One I/O,The location should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000045,I/O Properties Checks for One I/O,The I/O standard should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
|
||||
IO_RULES,WEAK_PULL_UP_AND_BUS_HOLD_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000027,I/O Properties Checks for One I/O,Weak Pull Up and Bus Hold should not be used at the same time.,Critical,No Enable Bus-Hold Circuitry or Weak Pull-Up Resistor assignments found.,,I/O,,
|
||||
IO_RULES,OCT_AND_CURRENT_STRENGTH_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000026,I/O Properties Checks for One I/O,On Chip Termination and Current Strength should not be used at the same time.,Critical,No Current Strength or Termination assignments found.,,I/O,,
|
||||
IO_RULES,IO_DIR_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000024,I/O Properties Checks for One I/O,The I/O direction should support the On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_OPEN_DRAIN_VALUE,INAPPLICABLE,IO_000023,I/O Properties Checks for One I/O,The I/O standard should support the Open Drain value.,Critical,No open drain assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000022,I/O Properties Checks for One I/O,The I/O standard should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000021,I/O Properties Checks for One I/O,The I/O standard should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_PCI_CLAMP_DIODE,PASS,IO_000020,I/O Properties Checks for One I/O,The I/O standard should support the requested PCI Clamp Diode.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000019,I/O Properties Checks for One I/O,The I/O standard should support the requested On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000018,I/O Properties Checks for One I/O,The I/O standard should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_PCI_CLAMP_DIODE,PASS,IO_000015,I/O Properties Checks for One I/O,The location should support the requested PCI Clamp Diode.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000014,I/O Properties Checks for One I/O,The location should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000013,I/O Properties Checks for One I/O,The location should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000012,I/O Properties Checks for One I/O,The location should support the requested On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000011,I/O Properties Checks for One I/O,The location should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_IO_DIR,PASS,IO_000010,I/O Properties Checks for One I/O,The location should support the requested I/O direction.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_IO_STD,PASS,IO_000009,I/O Properties Checks for One I/O,The location should support the requested I/O standard.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,CURRENT_DENSITY_FOR_CONSECUTIVE_IO_NOT_EXCEED_CURRENT_VALUE,PASS,IO_000033,Electromigration Checks,Current density for consecutive I/Os should not exceed 160mA for row I/Os and 160mA for column I/Os.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,SINGLE_ENDED_OUTPUTS_LAB_ROWS_FROM_DIFF_IO,INAPPLICABLE,IO_000034,SI Related Distance Checks,Single-ended outputs should be 5 LAB row(s) away from a differential I/O.,High,No Differential I/O Standard assignments found.,,I/O,,
|
||||
IO_RULES,MAX_20_OUTPUTS_ALLOWED_IN_VREFGROUP,INAPPLICABLE,IO_000042,SI Related SSO Limit Checks,No more than 20 outputs are allowed in a VREF group when VREF is being read from.,High,No VREF I/O Standard assignments found.,,I/O,,
|
||||
IO_RULES_MATRIX,Pin/Rules,IO_000002;IO_000001;IO_000003;IO_000004;IO_000005;IO_000006;IO_000007;IO_000008;IO_000047;IO_000046;IO_000045;IO_000027;IO_000026;IO_000024;IO_000023;IO_000022;IO_000021;IO_000020;IO_000019;IO_000018;IO_000015;IO_000014;IO_000013;IO_000012;IO_000011;IO_000010;IO_000009;IO_000033;IO_000034;IO_000042,
|
||||
IO_RULES_MATRIX,Total Pass,0;20;20;0;0;20;20;0;0;0;0;0;0;0;0;0;0;2;0;0;2;0;0;0;0;20;20;20;0;0,
|
||||
IO_RULES_MATRIX,Total Unchecked,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
|
||||
IO_RULES_MATRIX,Total Inapplicable,20;0;0;20;20;0;0;20;20;20;20;20;20;20;20;20;20;18;20;20;18;20;20;20;20;0;0;0;20;20,
|
||||
IO_RULES_MATRIX,Total Fail,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
|
||||
IO_RULES_MATRIX,segment_led_1[0],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[1],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[2],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[3],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[4],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[5],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[6],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[7],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[8],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[0],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[1],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[2],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[3],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[4],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[5],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[6],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[7],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[8],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,rst,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,clk_12MHz,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_SUMMARY,Total I/O Rules,30,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Passed,9,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Failed,0,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Unchecked,0,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Inapplicable,21,
|
||||
二进制
Exp7/db/Frequency.cmp.rdb
普通文件
二进制
Exp7/db/Frequency.cmp.rdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.cmp_merge.kpt
普通文件
二进制
Exp7/db/Frequency.cmp_merge.kpt
普通文件
二进制文件未显示。
3
Exp7/db/Frequency.db_info
普通文件
3
Exp7/db/Frequency.db_info
普通文件
@ -0,0 +1,3 @@
|
||||
Quartus_Version = Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Version_Index = 604268800
|
||||
Creation_Time = Fri Jan 16 11:16:28 2026
|
||||
6
Exp7/db/Frequency.eda.qmsg
普通文件
6
Exp7/db/Frequency.eda.qmsg
普通文件
@ -0,0 +1,6 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768534588528 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768534588528 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 11:36:28 2026 " "Processing started: Fri Jan 16 11:36:28 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768534588528 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768534588528 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off Frequency -c Frequency " "Command: quartus_eda --read_settings_files=off --write_settings_files=off Frequency -c Frequency" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768534588528 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1768534588615 ""}
|
||||
{ "Info" "IWSC_DONE_HDL_GENERATION" "Frequency.vo /home/lanshuye/Projects/DCExp/Exp7/simulation/questa/ simulation " "Generated file Frequency.vo in folder \"/home/lanshuye/Projects/DCExp/Exp7/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1768534588638 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "583 " "Peak virtual memory: 583 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768534588644 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 11:36:28 2026 " "Processing ended: Fri Jan 16 11:36:28 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768534588644 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768534588644 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768534588644 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768534588644 ""}
|
||||
53
Exp7/db/Frequency.fit.qmsg
普通文件
53
Exp7/db/Frequency.fit.qmsg
普通文件
@ -0,0 +1,53 @@
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1768534581482 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1768534581482 ""}
|
||||
{ "Info" "IMPP_MPP_USER_DEVICE" "Frequency 10M02SCM153I7G " "Selected device 10M02SCM153I7G for design \"Frequency\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1768534581485 ""}
|
||||
{ "Info" "IMPP_MPP_BOOT_SEL_PIN_NOT_RESERVED" "" "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." { } { } 0 22896 "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." 0 0 "Fitter" 0 -1 1768534581501 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768534581501 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768534581501 ""}
|
||||
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1768534581535 ""}
|
||||
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1768534581537 ""}
|
||||
{ "Critical Warning" "WFCUDA_FCUDA_SPS_DEVICE_POWER_LIMITATION" "" "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." { } { } 1 16562 "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." 0 0 "Fitter" 0 -1 1768534581554 ""}
|
||||
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M08SCM153I7G " "Device 10M08SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768534581554 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M04SCM153I7G " "Device 10M04SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768534581554 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1768534581554 ""}
|
||||
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "7 " "Fitter converted 7 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TMS~ G1 " "Pin ~ALTERA_TMS~ is reserved at location G1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TMS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 0 { 0 ""} 0 170 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768534581556 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TCK~ J1 " "Pin ~ALTERA_TCK~ is reserved at location J1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TCK~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 0 { 0 ""} 0 172 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768534581556 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDI~ H5 " "Pin ~ALTERA_TDI~ is reserved at location H5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDI~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 0 { 0 ""} 0 174 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768534581556 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDO~ H4 " "Pin ~ALTERA_TDO~ is reserved at location H4" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDO~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 0 { 0 ""} 0 176 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768534581556 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCONFIG~ E8 " "Pin ~ALTERA_nCONFIG~ is reserved at location E8" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nCONFIG~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 0 { 0 ""} 0 178 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768534581556 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nSTATUS~ D6 " "Pin ~ALTERA_nSTATUS~ is reserved at location D6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nSTATUS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 0 { 0 ""} 0 180 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768534581556 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONF_DONE~ E6 " "Pin ~ALTERA_CONF_DONE~ is reserved at location E6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_CONF_DONE~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 0 { 0 ""} 0 182 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768534581556 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1768534581556 ""}
|
||||
{ "Info" "IFIOMGR_RESERVE_PIN_NO_DATA0" "" "DATA\[0\] dual-purpose pin not reserved" { } { } 0 169141 "DATA\[0\] dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768534581556 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "Data\[1\]/ASDO " "Data\[1\]/ASDO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768534581556 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "nCSO " "nCSO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768534581556 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "DCLK " "DCLK dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768534581556 ""}
|
||||
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1768534581557 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Frequency.sdc " "Synopsys Design Constraints File file not found: 'Frequency.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1768534581783 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1768534581783 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1768534581784 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Fitter" 0 -1 1768534581784 ""}
|
||||
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1768534581785 ""}
|
||||
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "clk_12MHz~input (placed in PIN J5 (CLK0p, DIFFIO_RX_L14p, DIFFOUT_L14p, High_Speed)) " "Automatically promoted node clk_12MHz~input (placed in PIN J5 (CLK0p, DIFFIO_RX_L14p, DIFFOUT_L14p, High_Speed))" { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock CLKCTRL_G4 " "Automatically promoted destinations to use location or clock signal Global Clock CLKCTRL_G4" { } { } 0 176355 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "Design Software" 0 -1 1768534581790 ""} } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 3 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 0 { 0 ""} 0 164 14177 15141 0 0 "" 0 "" "" } } } } } 0 176353 "Automatically promoted node %1!s! %2!s!" 0 0 "Fitter" 0 -1 1768534581790 ""}
|
||||
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "clk_1Hz " "Automatically promoted node clk_1Hz " { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock " "Automatically promoted destinations to use location or clock signal Global Clock" { } { } 0 176355 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "Design Software" 0 -1 1768534581790 ""} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS" "" "Following destination nodes may be non-global or may not use global or regional clocks" { { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "clk_1Hz~0 " "Destination node clk_1Hz~0" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 10 -1 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 0 { 0 ""} 0 79 14177 15141 0 0 "" 0 "" "" } } } } } 0 176357 "Destination node %1!s!" 0 0 "Design Software" 0 -1 1768534581790 ""} } { } 0 176356 "Following destination nodes may be non-global or may not use global or regional clocks" 0 0 "Design Software" 0 -1 1768534581790 ""} } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 10 -1 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 0 { 0 ""} 0 59 14177 15141 0 0 "" 0 "" "" } } } } } 0 176353 "Automatically promoted node %1!s! %2!s!" 0 0 "Fitter" 0 -1 1768534581790 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1768534581971 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768534581971 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768534581971 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768534581972 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768534581972 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1768534581972 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1768534581972 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1768534581972 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1768534581972 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1768534581972 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1768534581972 ""}
|
||||
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768534581977 ""}
|
||||
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1768534581978 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1768534582182 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768534582198 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1768534582203 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1768534582339 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768534582339 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1768534582573 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X9_Y0 X18_Y8 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8" { } { { "loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8"} { { 12 { 0 ""} 9 0 10 9 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1768534582676 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1768534582676 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1768534582762 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1768534582762 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768534582763 ""}
|
||||
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.06 " "Total time spent on timing analysis during the Fitter is 0.06 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1768534582851 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768534582855 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768534582966 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768534582966 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768534583077 ""}
|
||||
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:01 " "Fitter post-fit operations ending: elapsed time is 00:00:01" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768534583247 ""}
|
||||
{ "Warning" "WFIOMGR_FIOMGR_REFER_APPNOTE_447_TOP_LEVEL" "2 MAX 10 " "2 pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing MAX 10 Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." { { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "rst 3.3-V LVTTL J9 " "Pin rst uses I/O standard 3.3-V LVTTL at J9" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { rst } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "rst" } } } } { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 4 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 0 { 0 ""} 0 26 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768534583265 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "clk_12MHz 3.3-V LVTTL J5 " "Pin clk_12MHz uses I/O standard 3.3-V LVTTL at J5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { clk_12MHz } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "clk_12MHz" } } } } { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 3 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp7/" { { 0 { 0 ""} 0 25 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768534583265 ""} } { } 0 169177 "%1!d! pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing %2!s! Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." 0 0 "Fitter" 0 -1 1768534583265 ""}
|
||||
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "/home/lanshuye/Projects/DCExp/Exp7/output_files/Frequency.fit.smsg " "Generated suppressed messages file /home/lanshuye/Projects/DCExp/Exp7/output_files/Frequency.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1768534583276 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1764 " "Peak virtual memory: 1764 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768534583394 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 11:36:23 2026 " "Processing ended: Fri Jan 16 11:36:23 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768534583394 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:02 " "Elapsed time: 00:00:02" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768534583394 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:03 " "Total CPU time (on all processors): 00:00:03" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768534583394 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1768534583394 ""}
|
||||
99
Exp7/db/Frequency.hier_info
普通文件
99
Exp7/db/Frequency.hier_info
普通文件
@ -0,0 +1,99 @@
|
||||
|Frequency
|
||||
clk_12MHz => clk_1Hz.CLK
|
||||
clk_12MHz => div_counter[0].CLK
|
||||
clk_12MHz => div_counter[1].CLK
|
||||
clk_12MHz => div_counter[2].CLK
|
||||
clk_12MHz => div_counter[3].CLK
|
||||
clk_12MHz => div_counter[4].CLK
|
||||
clk_12MHz => div_counter[5].CLK
|
||||
clk_12MHz => div_counter[6].CLK
|
||||
clk_12MHz => div_counter[7].CLK
|
||||
clk_12MHz => div_counter[8].CLK
|
||||
clk_12MHz => div_counter[9].CLK
|
||||
clk_12MHz => div_counter[10].CLK
|
||||
clk_12MHz => div_counter[11].CLK
|
||||
clk_12MHz => div_counter[12].CLK
|
||||
clk_12MHz => div_counter[13].CLK
|
||||
clk_12MHz => div_counter[14].CLK
|
||||
clk_12MHz => div_counter[15].CLK
|
||||
clk_12MHz => div_counter[16].CLK
|
||||
clk_12MHz => div_counter[17].CLK
|
||||
clk_12MHz => div_counter[18].CLK
|
||||
clk_12MHz => div_counter[19].CLK
|
||||
clk_12MHz => div_counter[20].CLK
|
||||
clk_12MHz => div_counter[21].CLK
|
||||
clk_12MHz => div_counter[22].CLK
|
||||
clk_12MHz => div_counter[23].CLK
|
||||
rst => rst.IN1
|
||||
segment_led_1[0] <= Seg:u_seg.segment_led_1
|
||||
segment_led_1[1] <= Seg:u_seg.segment_led_1
|
||||
segment_led_1[2] <= Seg:u_seg.segment_led_1
|
||||
segment_led_1[3] <= Seg:u_seg.segment_led_1
|
||||
segment_led_1[4] <= Seg:u_seg.segment_led_1
|
||||
segment_led_1[5] <= Seg:u_seg.segment_led_1
|
||||
segment_led_1[6] <= Seg:u_seg.segment_led_1
|
||||
segment_led_1[7] <= Seg:u_seg.segment_led_1
|
||||
segment_led_1[8] <= Seg:u_seg.segment_led_1
|
||||
segment_led_2[0] <= Seg:u_seg.segment_led_2
|
||||
segment_led_2[1] <= Seg:u_seg.segment_led_2
|
||||
segment_led_2[2] <= Seg:u_seg.segment_led_2
|
||||
segment_led_2[3] <= Seg:u_seg.segment_led_2
|
||||
segment_led_2[4] <= Seg:u_seg.segment_led_2
|
||||
segment_led_2[5] <= Seg:u_seg.segment_led_2
|
||||
segment_led_2[6] <= Seg:u_seg.segment_led_2
|
||||
segment_led_2[7] <= Seg:u_seg.segment_led_2
|
||||
segment_led_2[8] <= Seg:u_seg.segment_led_2
|
||||
|
||||
|
||||
|Frequency|Counter:u_counter
|
||||
func => counter.OUTPUTSELECT
|
||||
func => counter.OUTPUTSELECT
|
||||
func => counter.OUTPUTSELECT
|
||||
func => counter.OUTPUTSELECT
|
||||
func => counter[0].ADATA
|
||||
func => counter[1].ADATA
|
||||
func => counter[2].ADATA
|
||||
func => counter[3].ADATA
|
||||
rst => counter[3].ALOAD
|
||||
rst => counter[2].ALOAD
|
||||
rst => counter[1].ALOAD
|
||||
rst => counter[0].ALOAD
|
||||
clk => counter[3].CLK
|
||||
clk => counter[2].CLK
|
||||
clk => counter[1].CLK
|
||||
clk => counter[0].CLK
|
||||
led[3] <= counter[3].DB_MAX_OUTPUT_PORT_TYPE
|
||||
led[2] <= counter[2].DB_MAX_OUTPUT_PORT_TYPE
|
||||
led[1] <= counter[1].DB_MAX_OUTPUT_PORT_TYPE
|
||||
led[0] <= counter[0].DB_MAX_OUTPUT_PORT_TYPE
|
||||
|
||||
|
||||
|Frequency|Seg:u_seg
|
||||
seg_data_1[3] => seg.RADDR
|
||||
seg_data_1[2] => seg.RADDR1
|
||||
seg_data_1[1] => seg.RADDR2
|
||||
seg_data_1[0] => seg.RADDR3
|
||||
seg_data_2[0] => seg.PORTBRADDR
|
||||
seg_data_2[1] => seg.PORTBRADDR1
|
||||
seg_data_2[2] => seg.PORTBRADDR2
|
||||
seg_data_2[3] => seg.PORTBRADDR3
|
||||
segment_led_1[8] <= seg.DATAOUT
|
||||
segment_led_1[7] <= seg.DATAOUT1
|
||||
segment_led_1[6] <= seg.DATAOUT2
|
||||
segment_led_1[5] <= seg.DATAOUT3
|
||||
segment_led_1[4] <= seg.DATAOUT4
|
||||
segment_led_1[3] <= seg.DATAOUT5
|
||||
segment_led_1[2] <= seg.DATAOUT6
|
||||
segment_led_1[1] <= seg.DATAOUT7
|
||||
segment_led_1[0] <= seg.DATAOUT8
|
||||
segment_led_2[8] <= seg.PORTBDATAOUT
|
||||
segment_led_2[7] <= seg.PORTBDATAOUT1
|
||||
segment_led_2[6] <= seg.PORTBDATAOUT2
|
||||
segment_led_2[5] <= seg.PORTBDATAOUT3
|
||||
segment_led_2[4] <= seg.PORTBDATAOUT4
|
||||
segment_led_2[3] <= seg.PORTBDATAOUT5
|
||||
segment_led_2[2] <= seg.PORTBDATAOUT6
|
||||
segment_led_2[1] <= seg.PORTBDATAOUT7
|
||||
segment_led_2[0] <= seg.PORTBDATAOUT8
|
||||
|
||||
|
||||
二进制
Exp7/db/Frequency.hif
普通文件
二进制
Exp7/db/Frequency.hif
普通文件
二进制文件未显示。
50
Exp7/db/Frequency.lpc.html
普通文件
50
Exp7/db/Frequency.lpc.html
普通文件
@ -0,0 +1,50 @@
|
||||
<TABLE>
|
||||
<TR bgcolor="#C0C0C0">
|
||||
<TH>Hierarchy</TH>
|
||||
<TH>Input</TH>
|
||||
<TH>Constant Input</TH>
|
||||
<TH>Unused Input</TH>
|
||||
<TH>Floating Input</TH>
|
||||
<TH>Output</TH>
|
||||
<TH>Constant Output</TH>
|
||||
<TH>Unused Output</TH>
|
||||
<TH>Floating Output</TH>
|
||||
<TH>Bidir</TH>
|
||||
<TH>Constant Bidir</TH>
|
||||
<TH>Unused Bidir</TH>
|
||||
<TH>Input only Bidir</TH>
|
||||
<TH>Output only Bidir</TH>
|
||||
</TR>
|
||||
<TR >
|
||||
<TD >u_seg</TD>
|
||||
<TD >8</TD>
|
||||
<TD >4</TD>
|
||||
<TD >0</TD>
|
||||
<TD >4</TD>
|
||||
<TD >18</TD>
|
||||
<TD >4</TD>
|
||||
<TD >4</TD>
|
||||
<TD >4</TD>
|
||||
<TD >0</TD>
|
||||
<TD >0</TD>
|
||||
<TD >0</TD>
|
||||
<TD >0</TD>
|
||||
<TD >0</TD>
|
||||
</TR>
|
||||
<TR >
|
||||
<TD >u_counter</TD>
|
||||
<TD >3</TD>
|
||||
<TD >1</TD>
|
||||
<TD >0</TD>
|
||||
<TD >1</TD>
|
||||
<TD >4</TD>
|
||||
<TD >1</TD>
|
||||
<TD >1</TD>
|
||||
<TD >1</TD>
|
||||
<TD >0</TD>
|
||||
<TD >0</TD>
|
||||
<TD >0</TD>
|
||||
<TD >0</TD>
|
||||
<TD >0</TD>
|
||||
</TR>
|
||||
</TABLE>
|
||||
二进制
Exp7/db/Frequency.lpc.rdb
普通文件
二进制
Exp7/db/Frequency.lpc.rdb
普通文件
二进制文件未显示。
8
Exp7/db/Frequency.lpc.txt
普通文件
8
Exp7/db/Frequency.lpc.txt
普通文件
@ -0,0 +1,8 @@
|
||||
+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
|
||||
; Legal Partition Candidates ;
|
||||
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+
|
||||
; Hierarchy ; Input ; Constant Input ; Unused Input ; Floating Input ; Output ; Constant Output ; Unused Output ; Floating Output ; Bidir ; Constant Bidir ; Unused Bidir ; Input only Bidir ; Output only Bidir ;
|
||||
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+
|
||||
; u_seg ; 8 ; 4 ; 0 ; 4 ; 18 ; 4 ; 4 ; 4 ; 0 ; 0 ; 0 ; 0 ; 0 ;
|
||||
; u_counter ; 3 ; 1 ; 0 ; 1 ; 4 ; 1 ; 1 ; 1 ; 0 ; 0 ; 0 ; 0 ; 0 ;
|
||||
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+
|
||||
二进制
Exp7/db/Frequency.map.ammdb
普通文件
二进制
Exp7/db/Frequency.map.ammdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.map.bpm
普通文件
二进制
Exp7/db/Frequency.map.bpm
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.map.cdb
普通文件
二进制
Exp7/db/Frequency.map.cdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.map.hdb
普通文件
二进制
Exp7/db/Frequency.map.hdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.map.kpt
普通文件
二进制
Exp7/db/Frequency.map.kpt
普通文件
二进制文件未显示。
1
Exp7/db/Frequency.map.logdb
普通文件
1
Exp7/db/Frequency.map.logdb
普通文件
@ -0,0 +1 @@
|
||||
v1
|
||||
23
Exp7/db/Frequency.map.qmsg
普通文件
23
Exp7/db/Frequency.map.qmsg
普通文件
@ -0,0 +1,23 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768534576402 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768534576402 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 11:36:16 2026 " "Processing started: Fri Jan 16 11:36:16 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768534576402 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534576402 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off Frequency -c Frequency " "Command: quartus_map --read_settings_files=on --write_settings_files=off Frequency -c Frequency" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534576402 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1768534576481 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1768534576482 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Frequency.v 1 1 " "Found 1 design units, including 1 entities, in source file Frequency.v" { { "Info" "ISGN_ENTITY_NAME" "1 Frequency " "Found entity 1: Frequency" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 2 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768534580152 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534580152 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Counter.v 1 1 " "Found 1 design units, including 1 entities, in source file Counter.v" { { "Info" "ISGN_ENTITY_NAME" "1 Counter " "Found entity 1: Counter" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Counter.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768534580153 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534580153 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Seg.v 1 1 " "Found 1 design units, including 1 entities, in source file Seg.v" { { "Info" "ISGN_ENTITY_NAME" "1 Seg " "Found entity 1: Seg" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Seg.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768534580153 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534580153 ""}
|
||||
{ "Info" "ISGN_START_ELABORATION_TOP" "Frequency " "Elaborating entity \"Frequency\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1768534580173 ""}
|
||||
{ "Info" "ISGN_START_ELABORATION_HIERARCHY" "Counter Counter:u_counter " "Elaborating entity \"Counter\" for hierarchy \"Counter:u_counter\"" { } { { "Frequency.v" "u_counter" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 37 0 0 } } } 0 12128 "Elaborating entity \"%1!s!\" for hierarchy \"%2!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768534580176 ""}
|
||||
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 4 Counter.v(13) " "Verilog HDL assignment warning at Counter.v(13): truncated value with size 32 to match size of target (4)" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Counter.v" 13 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1768534580176 "|Frequency|Counter:u_counter"}
|
||||
{ "Info" "ISGN_START_ELABORATION_HIERARCHY" "Seg Seg:u_seg " "Elaborating entity \"Seg\" for hierarchy \"Seg:u_seg\"" { } { { "Frequency.v" "u_seg" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 45 0 0 } } } 0 12128 "Elaborating entity \"%1!s!\" for hierarchy \"%2!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768534580176 ""}
|
||||
{ "Warning" "WVRFX_VDB_DRIVERLESS_NET" "seg.data_a 0 Seg.v(8) " "Net \"seg.data_a\" at Seg.v(8) has no driver or initial value, using a default initial value '0'" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Seg.v" 8 0 0 } } } 0 10030 "Net \"%1!s!\" at %3!s! has no driver or initial value, using a default initial value '%2!c!'" 0 0 "Analysis & Synthesis" 0 -1 1768534580177 "|Frequency|Seg:u_seg"}
|
||||
{ "Warning" "WVRFX_VDB_DRIVERLESS_NET" "seg.waddr_a 0 Seg.v(8) " "Net \"seg.waddr_a\" at Seg.v(8) has no driver or initial value, using a default initial value '0'" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Seg.v" 8 0 0 } } } 0 10030 "Net \"%1!s!\" at %3!s! has no driver or initial value, using a default initial value '%2!c!'" 0 0 "Analysis & Synthesis" 0 -1 1768534580177 "|Frequency|Seg:u_seg"}
|
||||
{ "Warning" "WVRFX_VDB_DRIVERLESS_NET" "seg.we_a 0 Seg.v(8) " "Net \"seg.we_a\" at Seg.v(8) has no driver or initial value, using a default initial value '0'" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Seg.v" 8 0 0 } } } 0 10030 "Net \"%1!s!\" at %3!s! has no driver or initial value, using a default initial value '%2!c!'" 0 0 "Analysis & Synthesis" 0 -1 1768534580177 "|Frequency|Seg:u_seg"}
|
||||
{ "Info" "IINFER_UNINFERRED_RAM_SUMMARY" "1 " "Found 1 instances of uninferred RAM logic" { { "Info" "IINFER_MIF_NOT_SUPPORTED_FOR_HARDCOPY" "Seg:u_seg\|seg " "RAM logic \"Seg:u_seg\|seg\" is uninferred because MIF is not supported for the selected family" { } { { "Seg.v" "seg" { Text "/home/lanshuye/Projects/DCExp/Exp7/Seg.v" 8 -1 0 } } } 0 276013 "RAM logic \"%1!s!\" is uninferred because MIF is not supported for the selected family" 0 0 "Design Software" 0 -1 1768534580236 ""} } { } 0 276014 "Found %1!d! instances of uninferred RAM logic" 0 0 "Analysis & Synthesis" 0 -1 1768534580236 ""}
|
||||
{ "Info" "IMLS_MLS_PRESET_POWER_UP" "" "Registers with preset signals will power-up high" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Counter.v" 13 -1 0 } } } 0 13000 "Registers with preset signals will power-up high" 0 0 "Analysis & Synthesis" 0 -1 1768534580306 ""}
|
||||
{ "Info" "IMLS_MLS_DEV_CLRN_SETS_REGISTERS" "" "DEV_CLRn pin will set, and not reset, register with preset signal due to NOT Gate Push-Back" { } { } 0 13003 "DEV_CLRn pin will set, and not reset, register with preset signal due to NOT Gate Push-Back" 0 0 "Analysis & Synthesis" 0 -1 1768534580307 ""}
|
||||
{ "Warning" "WMLS_MLS_STUCK_PIN_HDR" "" "Output pins are stuck at VCC or GND" { { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_1\[7\] GND " "Pin \"segment_led_1\[7\]\" is stuck at GND" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 5 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768534580312 "|Frequency|segment_led_1[7]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_1\[8\] GND " "Pin \"segment_led_1\[8\]\" is stuck at GND" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 5 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768534580312 "|Frequency|segment_led_1[8]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_2\[0\] VCC " "Pin \"segment_led_2\[0\]\" is stuck at VCC" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768534580312 "|Frequency|segment_led_2[0]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_2\[1\] VCC " "Pin \"segment_led_2\[1\]\" is stuck at VCC" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768534580312 "|Frequency|segment_led_2[1]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_2\[2\] VCC " "Pin \"segment_led_2\[2\]\" is stuck at VCC" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768534580312 "|Frequency|segment_led_2[2]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_2\[3\] VCC " "Pin \"segment_led_2\[3\]\" is stuck at VCC" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768534580312 "|Frequency|segment_led_2[3]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_2\[4\] VCC " "Pin \"segment_led_2\[4\]\" is stuck at VCC" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768534580312 "|Frequency|segment_led_2[4]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_2\[5\] VCC " "Pin \"segment_led_2\[5\]\" is stuck at VCC" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768534580312 "|Frequency|segment_led_2[5]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_2\[6\] GND " "Pin \"segment_led_2\[6\]\" is stuck at GND" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768534580312 "|Frequency|segment_led_2[6]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_2\[7\] GND " "Pin \"segment_led_2\[7\]\" is stuck at GND" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768534580312 "|Frequency|segment_led_2[7]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_2\[8\] GND " "Pin \"segment_led_2\[8\]\" is stuck at GND" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768534580312 "|Frequency|segment_led_2[8]"} } { } 0 13024 "Output pins are stuck at VCC or GND" 0 0 "Analysis & Synthesis" 0 -1 1768534580312 ""}
|
||||
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1768534580334 ""}
|
||||
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1768534580475 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768534580475 ""}
|
||||
{ "Info" "ICUT_CUT_TM_SUMMARY" "73 " "Implemented 73 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "2 " "Implemented 2 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1768534580488 ""} { "Info" "ICUT_CUT_TM_OPINS" "18 " "Implemented 18 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1768534580488 ""} { "Info" "ICUT_CUT_TM_LCELLS" "53 " "Implemented 53 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1768534580488 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1768534580488 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 17 s Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 17 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "482 " "Peak virtual memory: 482 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768534580490 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 11:36:20 2026 " "Processing ended: Fri Jan 16 11:36:20 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768534580490 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768534580490 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:14 " "Total CPU time (on all processors): 00:00:14" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768534580490 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534580490 ""}
|
||||
二进制
Exp7/db/Frequency.map.rdb
普通文件
二进制
Exp7/db/Frequency.map.rdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.map_bb.cdb
普通文件
二进制
Exp7/db/Frequency.map_bb.cdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.map_bb.hdb
普通文件
二进制
Exp7/db/Frequency.map_bb.hdb
普通文件
二进制文件未显示。
@ -0,0 +1 @@
|
||||
v1
|
||||
20
Exp7/db/Frequency.pow.qmsg
普通文件
20
Exp7/db/Frequency.pow.qmsg
普通文件
@ -0,0 +1,20 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768534585396 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Power Analyzer Quartus Prime " "Running Quartus Prime Power Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768534585397 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 11:36:25 2026 " "Processing started: Fri Jan 16 11:36:25 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768534585397 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Power Analyzer" 0 -1 1768534585397 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_pow --read_settings_files=off --write_settings_files=off Frequency -c Frequency " "Command: quartus_pow --read_settings_files=off --write_settings_files=off Frequency -c Frequency" { } { } 0 0 "Command: %1!s!" 0 0 "Power Analyzer" 0 -1 1768534585397 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Power Analyzer" 0 -1 1768534585471 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768534585473 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768534585473 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Frequency.sdc " "Synopsys Design Constraints File file not found: 'Frequency.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Power Analyzer" 0 -1 1768534585602 ""}
|
||||
{ "Warning" "WSTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT" "clk_12MHz " "Node: clk_12MHz was determined to be a clock but was found without an associated clock assignment." { { "Info" "ISTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT_DETAILS" "Register div_counter\[0\] clk_12MHz " "Register div_counter\[0\] is being clocked by clk_12MHz" { } { } 0 13166 "%1!s! %2!s! is being clocked by %3!s!" 0 0 "Design Software" 0 -1 1768534585603 ""} } { } 0 332060 "Node: %1!s! was determined to be a clock but was found without an associated clock assignment." 0 0 "Power Analyzer" 0 -1 1768534585603 "|Frequency|clk_12MHz"}
|
||||
{ "Warning" "WSTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT" "clk_1Hz " "Node: clk_1Hz was determined to be a clock but was found without an associated clock assignment." { { "Info" "ISTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT_DETAILS" "Register Counter:u_counter\|counter\[3\] clk_1Hz " "Register Counter:u_counter\|counter\[3\] is being clocked by clk_1Hz" { } { } 0 13166 "%1!s! %2!s! is being clocked by %3!s!" 0 0 "Design Software" 0 -1 1768534585603 ""} } { } 0 332060 "Node: %1!s! was determined to be a clock but was found without an associated clock assignment." 0 0 "Power Analyzer" 0 -1 1768534585603 "|Frequency|clk_1Hz"}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Power Analyzer" 0 -1 1768534585603 ""}
|
||||
{ "Info" "IPVA_PVA_START_CALCULATION" "" "Starting Vectorless Power Activity Estimation" { } { } 0 223000 "Starting Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768534585605 ""}
|
||||
{ "Warning" "WPUTIL_PUTIL_NO_CLK_DOMAINS_FOUND" "" "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" { } { } 0 222013 "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" 0 0 "Power Analyzer" 0 -1 1768534585606 ""}
|
||||
{ "Info" "IPVA_PVA_END_CALCULATION" "" "Completed Vectorless Power Activity Estimation" { } { } 0 223001 "Completed Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768534585606 ""}
|
||||
{ "Info" "IPATFAM_USING_ADVANCED_IO_POWER" "" "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" { } { } 0 218000 "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" 0 0 "Power Analyzer" 0 -1 1768534585728 ""}
|
||||
{ "Warning" "WPAN_PAN_NO_THERMAL_MODEL_SELECTED" "" "No board thermal model was selected. Analyzing without board thermal modeling." { } { } 0 215044 "No board thermal model was selected. Analyzing without board thermal modeling." 0 0 "Power Analyzer" 0 -1 1768534585728 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Power Analyzer" 0 -1 1768534585749 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Power Analyzer" 0 -1 1768534585872 ""}
|
||||
{ "Info" "IPAN_AVG_TOGGLE_RATE_PER_DESIGN" "0.000 millions of transitions / sec " "Average toggle rate for this design is 0.000 millions of transitions / sec" { } { } 0 215049 "Average toggle rate for this design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768534585996 ""}
|
||||
{ "Info" "IPAN_PAN_TOTAL_POWER_ESTIMATION" "113.62 mW " "Total thermal power estimate for the design is 113.62 mW" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "" { Report "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "Compiler" "" "" "" "" { } "PowerPlay Power Analyzer Summary" } } } 0 215031 "Total thermal power estimate for the design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768534586007 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Power Analyzer 0 s 7 s Quartus Prime " "Quartus Prime Power Analyzer was successful. 0 errors, 7 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "905 " "Peak virtual memory: 905 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768534586058 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 11:36:26 2026 " "Processing ended: Fri Jan 16 11:36:26 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768534586058 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768534586058 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768534586058 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Power Analyzer" 0 -1 1768534586058 ""}
|
||||
二进制
Exp7/db/Frequency.pplq.rdb
普通文件
二进制
Exp7/db/Frequency.pplq.rdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.pre_map.hdb
普通文件
二进制
Exp7/db/Frequency.pre_map.hdb
普通文件
二进制文件未显示。
1
Exp7/db/Frequency.qns
普通文件
1
Exp7/db/Frequency.qns
普通文件
@ -0,0 +1 @@
|
||||
Frequency/fit
|
||||
@ -0,0 +1,27 @@
|
||||
-- begin_signature
|
||||
-- Seg
|
||||
-- end_signature
|
||||
WIDTH=9;
|
||||
DEPTH=16;
|
||||
|
||||
ADDRESS_RADIX=UNS;
|
||||
DATA_RADIX=BIN;
|
||||
|
||||
CONTENT BEGIN
|
||||
15 : 001110001;
|
||||
14 : 001111001;
|
||||
13 : 001011110;
|
||||
12 : 000111001;
|
||||
11 : 001111100;
|
||||
10 : 001110111;
|
||||
9 : 001101111;
|
||||
8 : 001111111;
|
||||
7 : 000000111;
|
||||
6 : 001111101;
|
||||
5 : 001101101;
|
||||
4 : 001100110;
|
||||
3 : 001001111;
|
||||
2 : 001011011;
|
||||
1 : 000000110;
|
||||
0 : 000111111;
|
||||
END;
|
||||
二进制文件未显示。
二进制
Exp7/db/Frequency.routing.rdb
普通文件
二进制
Exp7/db/Frequency.routing.rdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.rtlv.hdb
普通文件
二进制
Exp7/db/Frequency.rtlv.hdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.rtlv_sg.cdb
普通文件
二进制
Exp7/db/Frequency.rtlv_sg.cdb
普通文件
二进制文件未显示。
二进制
Exp7/db/Frequency.rtlv_sg_swap.cdb
普通文件
二进制
Exp7/db/Frequency.rtlv_sg_swap.cdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1 @@
|
||||
DONE
|
||||
43
Exp7/db/Frequency.sta.qmsg
普通文件
43
Exp7/db/Frequency.sta.qmsg
普通文件
@ -0,0 +1,43 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768534586909 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768534586909 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 11:36:26 2026 " "Processing started: Fri Jan 16 11:36:26 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768534586909 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1768534586909 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta Frequency -c Frequency " "Command: quartus_sta Frequency -c Frequency" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1768534586909 ""}
|
||||
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1768534586925 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1768534586968 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1768534586968 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768534586984 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768534586984 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Frequency.sdc " "Synopsys Design Constraints File file not found: 'Frequency.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1768534587025 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768534587025 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_INFO" "Deriving Clocks " "Deriving Clocks" { { "Info" "ISTA_DERIVE_CLOCKS_INFO" "create_clock -period 1.000 -name clk_12MHz clk_12MHz " "create_clock -period 1.000 -name clk_12MHz clk_12MHz" { } { } 0 332105 "%1!s!" 0 0 "Design Software" 0 -1 1768534587026 ""} { "Info" "ISTA_DERIVE_CLOCKS_INFO" "create_clock -period 1.000 -name clk_1Hz clk_1Hz " "create_clock -period 1.000 -name clk_1Hz clk_1Hz" { } { } 0 332105 "%1!s!" 0 0 "Design Software" 0 -1 1768534587026 ""} } { } 0 332105 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768534587026 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1768534587026 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768534587026 ""}
|
||||
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1768534587026 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV 100C Model" { } { } 0 0 "Analyzing Slow 1200mV 100C Model" 0 0 "Timing Analyzer" 0 0 1768534587028 ""}
|
||||
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1768534587029 ""}
|
||||
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768534587030 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -3.833 " "Worst-case setup slack is -3.833" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587030 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587030 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.833 -51.068 clk_12MHz " " -3.833 -51.068 clk_12MHz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587030 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -0.236 -0.468 clk_1Hz " " -0.236 -0.468 clk_1Hz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587030 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768534587030 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.352 " "Worst-case hold slack is 0.352" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587031 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587031 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.352 0.000 clk_1Hz " " 0.352 0.000 clk_1Hz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587031 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.663 0.000 clk_12MHz " " 0.663 0.000 clk_12MHz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587031 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768534587031 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768534587031 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768534587031 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587031 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587031 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -38.075 clk_12MHz " " -3.000 -38.075 clk_12MHz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587031 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -1.403 -5.612 clk_1Hz " " -1.403 -5.612 clk_1Hz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587031 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768534587031 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV -40C Model" { } { } 0 0 "Analyzing Slow 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768534587033 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1768534587041 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1768534587165 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768534587177 ""}
|
||||
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768534587178 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -3.237 " "Worst-case setup slack is -3.237" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587178 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587178 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.237 -40.822 clk_12MHz " " -3.237 -40.822 clk_12MHz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587178 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -0.067 -0.132 clk_1Hz " " -0.067 -0.132 clk_1Hz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587178 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768534587178 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.301 " "Worst-case hold slack is 0.301" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587178 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587178 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.301 0.000 clk_1Hz " " 0.301 0.000 clk_1Hz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587178 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.579 0.000 clk_12MHz " " 0.579 0.000 clk_12MHz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587178 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768534587178 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768534587179 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768534587179 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587179 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587179 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -38.075 clk_12MHz " " -3.000 -38.075 clk_12MHz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587179 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -1.403 -5.612 clk_1Hz " " -1.403 -5.612 clk_1Hz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587179 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768534587179 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1200mV -40C Model" { } { } 0 0 "Analyzing Fast 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768534587180 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768534587225 ""}
|
||||
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768534587225 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -1.055 " "Worst-case setup slack is -1.055" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587226 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587226 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -1.055 -7.961 clk_12MHz " " -1.055 -7.961 clk_12MHz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587226 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.476 0.000 clk_1Hz " " 0.476 0.000 clk_1Hz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587226 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768534587226 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.146 " "Worst-case hold slack is 0.146" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587226 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587226 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.146 0.000 clk_1Hz " " 0.146 0.000 clk_1Hz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587226 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.238 0.000 clk_12MHz " " 0.238 0.000 clk_12MHz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587226 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768534587226 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768534587227 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768534587227 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587227 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587227 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -32.370 clk_12MHz " " -3.000 -32.370 clk_12MHz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587227 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -1.000 -4.000 clk_1Hz " " -1.000 -4.000 clk_1Hz " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768534587227 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768534587227 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768534587626 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768534587626 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "573 " "Peak virtual memory: 573 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768534587634 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 11:36:27 2026 " "Processing ended: Fri Jan 16 11:36:27 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768534587634 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768534587634 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768534587634 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1768534587634 ""}
|
||||
二进制
Exp7/db/Frequency.sta.rdb
普通文件
二进制
Exp7/db/Frequency.sta.rdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制
Exp7/db/Frequency.tis_db_list.ddb
普通文件
二进制
Exp7/db/Frequency.tis_db_list.ddb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
7
Exp7/db/Frequency.tmw_info
普通文件
7
Exp7/db/Frequency.tmw_info
普通文件
@ -0,0 +1,7 @@
|
||||
start_full_compilation:s:00:00:13
|
||||
start_analysis_synthesis:s:00:00:05-start_full_compilation
|
||||
start_analysis_elaboration:s-start_full_compilation
|
||||
start_fitter:s:00:00:03-start_full_compilation
|
||||
start_assembler:s:00:00:01-start_full_compilation
|
||||
start_timing_analyzer:s:00:00:02-start_full_compilation
|
||||
start_eda_netlist_writer:s:00:00:01-start_full_compilation
|
||||
二进制
Exp7/db/Frequency.vpr.ammdb
普通文件
二进制
Exp7/db/Frequency.vpr.ammdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1,45 @@
|
||||
{
|
||||
"partitions" : [
|
||||
{
|
||||
"name" : "Top",
|
||||
"pins" : [
|
||||
{
|
||||
"name" : "segment_led_1[0]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_1[1]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_1[2]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_1[3]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_1[4]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_1[5]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_1[6]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "rst",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "clk_12MHz",
|
||||
"strict" : false
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
}
|
||||
12
Exp7/db/prev_cmp_Frequency.qmsg
普通文件
12
Exp7/db/prev_cmp_Frequency.qmsg
普通文件
@ -0,0 +1,12 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768534540926 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768534540926 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 11:35:40 2026 " "Processing started: Fri Jan 16 11:35:40 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768534540926 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534540926 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off Frequency -c Frequency " "Command: quartus_map --read_settings_files=on --write_settings_files=off Frequency -c Frequency" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534540926 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1768534541004 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1768534541004 ""}
|
||||
{ "Error" "EVRFX_VERI_ZERO_SIZED_NUMBER" "Frequency.v(33) " "Verilog HDL literal error at Frequency.v(33): a sized number cannot have zero size" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 33 0 0 } } } 0 10260 "Verilog HDL literal error at %1!s!: a sized number cannot have zero size" 0 0 "Analysis & Synthesis" 0 -1 1768534544563 ""}
|
||||
{ "Error" "EVRFX_VERI_DESIGN_UNIT_IGNORED" "Frequency Frequency.v(2) " "Ignored design unit \"Frequency\" at Frequency.v(2) due to previous errors" { } { { "Frequency.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Frequency.v" 2 0 0 } } } 0 10112 "Ignored design unit \"%1!s!\" at %2!s! due to previous errors" 0 0 "Analysis & Synthesis" 0 -1 1768534544563 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Frequency.v 0 0 " "Found 0 design units, including 0 entities, in source file Frequency.v" { } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534544564 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Counter.v 1 1 " "Found 1 design units, including 1 entities, in source file Counter.v" { { "Info" "ISGN_ENTITY_NAME" "1 Counter " "Found entity 1: Counter" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Counter.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768534544564 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534544564 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Seg.v 1 1 " "Found 1 design units, including 1 entities, in source file Seg.v" { { "Info" "ISGN_ENTITY_NAME" "1 Seg " "Found entity 1: Seg" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp7/Seg.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768534544565 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534544565 ""}
|
||||
{ "Error" "EQEXE_ERROR_COUNT" "Analysis & Synthesis 2 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was unsuccessful. 2 errors, 1 warning" { { "Error" "EQEXE_END_PEAK_VSIZE_MEMORY" "335 " "Peak virtual memory: 335 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768534544581 ""} { "Error" "EQEXE_END_BANNER_TIME" "Fri Jan 16 11:35:44 2026 " "Processing ended: Fri Jan 16 11:35:44 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768534544581 ""} { "Error" "EQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768534544581 ""} { "Error" "EQEXE_ELAPSED_CPU_TIME" "00:00:13 " "Total CPU time (on all processors): 00:00:13" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768534544581 ""} } { } 0 0 "%6!s! %1!s! was unsuccessful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534544581 ""}
|
||||
{ "Error" "EFLOW_ERROR_COUNT" "Full Compilation 4 s 1 " "Quartus Prime Full Compilation was unsuccessful. 4 errors, 1 warning" { } { } 0 293001 "Quartus Prime %1!s! was unsuccessful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768534545212 ""}
|
||||
11
Exp7/incremental_db/README
普通文件
11
Exp7/incremental_db/README
普通文件
@ -0,0 +1,11 @@
|
||||
This folder contains data for incremental compilation.
|
||||
|
||||
The compiled_partitions sub-folder contains previous compilation results for each partition.
|
||||
As long as this folder is preserved, incremental compilation results from earlier compiles
|
||||
can be re-used. To perform a clean compilation from source files for all partitions, both
|
||||
the db and incremental_db folder should be removed.
|
||||
|
||||
The imported_partitions sub-folder contains the last imported QXP for each imported partition.
|
||||
As long as this folder is preserved, imported partitions will be automatically re-imported
|
||||
when the db or incremental_db/compiled_partitions folders are removed.
|
||||
|
||||
@ -0,0 +1,3 @@
|
||||
Quartus_Version = Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Version_Index = 604268800
|
||||
Creation_Time = Fri Jan 16 11:15:06 2026
|
||||
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1 @@
|
||||
v1
|
||||
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1 @@
|
||||
fa8634a97a99232bb4bb1c2e0a376209
|
||||
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1,92 @@
|
||||
Assembler report for Frequency
|
||||
Fri Jan 16 11:36:24 2026
|
||||
Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
|
||||
|
||||
---------------------
|
||||
; Table of Contents ;
|
||||
---------------------
|
||||
1. Legal Notice
|
||||
2. Assembler Summary
|
||||
3. Assembler Settings
|
||||
4. Assembler Generated Files
|
||||
5. Assembler Device Options: Frequency.sof
|
||||
6. Assembler Messages
|
||||
|
||||
|
||||
|
||||
----------------
|
||||
; Legal Notice ;
|
||||
----------------
|
||||
Copyright (C) 2025 Altera Corporation. All rights reserved.
|
||||
Your use of Altera Corporation's design tools, logic functions
|
||||
and other software and tools, and any partner logic
|
||||
functions, and any output files from any of the foregoing
|
||||
(including device programming or simulation files), and any
|
||||
associated documentation or information are expressly subject
|
||||
to the terms and conditions of the Altera Program License
|
||||
Subscription Agreement, the Altera Quartus Prime License Agreement,
|
||||
the Altera IP License Agreement, or other applicable license
|
||||
agreement, including, without limitation, that your use is for
|
||||
the sole purpose of programming logic devices manufactured by
|
||||
Altera and sold by Altera or its authorized distributors. Please
|
||||
refer to the Altera Software License Subscription Agreements
|
||||
on the Quartus Prime software download page.
|
||||
|
||||
|
||||
|
||||
+---------------------------------------------------------------+
|
||||
; Assembler Summary ;
|
||||
+-----------------------+---------------------------------------+
|
||||
; Assembler Status ; Successful - Fri Jan 16 11:36:24 2026 ;
|
||||
; Revision Name ; Frequency ;
|
||||
; Top-level Entity Name ; Frequency ;
|
||||
; Family ; MAX 10 ;
|
||||
; Device ; 10M02SCM153I7G ;
|
||||
+-----------------------+---------------------------------------+
|
||||
|
||||
|
||||
+----------------------------------+
|
||||
; Assembler Settings ;
|
||||
+--------+---------+---------------+
|
||||
; Option ; Setting ; Default Value ;
|
||||
+--------+---------+---------------+
|
||||
|
||||
|
||||
+---------------------------------------------------------------+
|
||||
; Assembler Generated Files ;
|
||||
+---------------------------------------------------------------+
|
||||
; File Name ;
|
||||
+---------------------------------------------------------------+
|
||||
; /home/lanshuye/Projects/DCExp/Exp7/output_files/Frequency.sof ;
|
||||
+---------------------------------------------------------------+
|
||||
|
||||
|
||||
+-----------------------------------------+
|
||||
; Assembler Device Options: Frequency.sof ;
|
||||
+----------------+------------------------+
|
||||
; Option ; Setting ;
|
||||
+----------------+------------------------+
|
||||
; JTAG usercode ; 0x00033167 ;
|
||||
; Checksum ; 0x00033167 ;
|
||||
+----------------+------------------------+
|
||||
|
||||
|
||||
+--------------------+
|
||||
; Assembler Messages ;
|
||||
+--------------------+
|
||||
Info: *******************************************************************
|
||||
Info: Running Quartus Prime Assembler
|
||||
Info: Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Info: Processing started: Fri Jan 16 11:36:24 2026
|
||||
Info: Command: quartus_asm --read_settings_files=off --write_settings_files=off Frequency -c Frequency
|
||||
Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
|
||||
Info (115031): Writing out detailed assembly data for power analysis
|
||||
Info (115030): Assembler is generating device programming files
|
||||
Info: Quartus Prime Assembler was successful. 0 errors, 1 warning
|
||||
Info: Peak virtual memory: 342 megabytes
|
||||
Info: Processing ended: Fri Jan 16 11:36:24 2026
|
||||
Info: Elapsed time: 00:00:00
|
||||
Info: Total CPU time (on all processors): 00:00:00
|
||||
|
||||
|
||||
@ -0,0 +1 @@
|
||||
Fri Jan 16 11:36:29 2026
|
||||
@ -0,0 +1,94 @@
|
||||
EDA Netlist Writer report for Frequency
|
||||
Fri Jan 16 11:36:28 2026
|
||||
Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
|
||||
|
||||
---------------------
|
||||
; Table of Contents ;
|
||||
---------------------
|
||||
1. Legal Notice
|
||||
2. EDA Netlist Writer Summary
|
||||
3. Simulation Settings
|
||||
4. Simulation Generated Files
|
||||
5. EDA Netlist Writer Messages
|
||||
|
||||
|
||||
|
||||
----------------
|
||||
; Legal Notice ;
|
||||
----------------
|
||||
Copyright (C) 2025 Altera Corporation. All rights reserved.
|
||||
Your use of Altera Corporation's design tools, logic functions
|
||||
and other software and tools, and any partner logic
|
||||
functions, and any output files from any of the foregoing
|
||||
(including device programming or simulation files), and any
|
||||
associated documentation or information are expressly subject
|
||||
to the terms and conditions of the Altera Program License
|
||||
Subscription Agreement, the Altera Quartus Prime License Agreement,
|
||||
the Altera IP License Agreement, or other applicable license
|
||||
agreement, including, without limitation, that your use is for
|
||||
the sole purpose of programming logic devices manufactured by
|
||||
Altera and sold by Altera or its authorized distributors. Please
|
||||
refer to the Altera Software License Subscription Agreements
|
||||
on the Quartus Prime software download page.
|
||||
|
||||
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
; EDA Netlist Writer Summary ;
|
||||
+---------------------------+---------------------------------------+
|
||||
; EDA Netlist Writer Status ; Successful - Fri Jan 16 11:36:28 2026 ;
|
||||
; Revision Name ; Frequency ;
|
||||
; Top-level Entity Name ; Frequency ;
|
||||
; Family ; MAX 10 ;
|
||||
; Simulation Files Creation ; Successful ;
|
||||
+---------------------------+---------------------------------------+
|
||||
|
||||
|
||||
+----------------------------------------------------------------------------------------------------------------------------------+
|
||||
; Simulation Settings ;
|
||||
+---------------------------------------------------------------------------------------------------+------------------------------+
|
||||
; Option ; Setting ;
|
||||
+---------------------------------------------------------------------------------------------------+------------------------------+
|
||||
; Tool Name ; Questa Altera FPGA (Verilog) ;
|
||||
; Generate functional simulation netlist ; On ;
|
||||
; Truncate long hierarchy paths ; Off ;
|
||||
; Map illegal HDL characters ; Off ;
|
||||
; Flatten buses into individual nodes ; Off ;
|
||||
; Maintain hierarchy ; Off ;
|
||||
; Bring out device-wide set/reset signals as ports ; Off ;
|
||||
; Enable glitch filtering ; Off ;
|
||||
; Do not write top level VHDL entity ; Off ;
|
||||
; Disable detection of setup and hold time violations in the input registers of bi-directional pins ; Off ;
|
||||
; Architecture name in VHDL output netlist ; structure ;
|
||||
; Generate third-party EDA tool command script for RTL functional simulation ; Off ;
|
||||
; Generate third-party EDA tool command script for gate-level simulation ; Off ;
|
||||
+---------------------------------------------------------------------------------------------------+------------------------------+
|
||||
|
||||
|
||||
+-------------------------------------------------------------------+
|
||||
; Simulation Generated Files ;
|
||||
+-------------------------------------------------------------------+
|
||||
; Generated Files ;
|
||||
+-------------------------------------------------------------------+
|
||||
; /home/lanshuye/Projects/DCExp/Exp7/simulation/questa/Frequency.vo ;
|
||||
+-------------------------------------------------------------------+
|
||||
|
||||
|
||||
+-----------------------------+
|
||||
; EDA Netlist Writer Messages ;
|
||||
+-----------------------------+
|
||||
Info: *******************************************************************
|
||||
Info: Running Quartus Prime EDA Netlist Writer
|
||||
Info: Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Info: Processing started: Fri Jan 16 11:36:28 2026
|
||||
Info: Command: quartus_eda --read_settings_files=off --write_settings_files=off Frequency -c Frequency
|
||||
Warning (18236): Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance.
|
||||
Info (204019): Generated file Frequency.vo in folder "/home/lanshuye/Projects/DCExp/Exp7/simulation/questa/" for EDA simulation tool
|
||||
Info: Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning
|
||||
Info: Peak virtual memory: 583 megabytes
|
||||
Info: Processing ended: Fri Jan 16 11:36:28 2026
|
||||
Info: Elapsed time: 00:00:00
|
||||
Info: Total CPU time (on all processors): 00:00:00
|
||||
|
||||
|
||||
1064
Exp7/output_files/Frequency.fit.rpt
普通文件
1064
Exp7/output_files/Frequency.fit.rpt
普通文件
文件差异内容过多而无法显示
加载差异
@ -0,0 +1,8 @@
|
||||
Extra Info (176273): Performing register packing on registers with non-logic cell location assignments
|
||||
Extra Info (176274): Completed register packing on registers with non-logic cell location assignments
|
||||
Extra Info (176236): Started Fast Input/Output/OE register processing
|
||||
Extra Info (176237): Finished Fast Input/Output/OE register processing
|
||||
Extra Info (176238): Start inferring scan chains for DSP blocks
|
||||
Extra Info (176239): Inferring scan chains for DSP blocks is complete
|
||||
Extra Info (176248): Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density
|
||||
Extra Info (176249): Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks
|
||||
@ -0,0 +1,18 @@
|
||||
Fitter Status : Successful - Fri Jan 16 11:36:23 2026
|
||||
Quartus Prime Version : 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Revision Name : Frequency
|
||||
Top-level Entity Name : Frequency
|
||||
Family : MAX 10
|
||||
Device : 10M02SCM153I7G
|
||||
Timing Models : Final
|
||||
Total logic elements : 55 / 2,304 ( 2 % )
|
||||
Total combinational functions : 54 / 2,304 ( 2 % )
|
||||
Dedicated logic registers : 29 / 2,304 ( 1 % )
|
||||
Total registers : 29
|
||||
Total pins : 20 / 112 ( 18 % )
|
||||
Total virtual pins : 0
|
||||
Total memory bits : 0 / 110,592 ( 0 % )
|
||||
Embedded Multiplier 9-bit elements : 0 / 32 ( 0 % )
|
||||
Total PLLs : 0 / 1 ( 0 % )
|
||||
UFM blocks : 0 / 1 ( 0 % )
|
||||
ADC blocks : 0
|
||||
142
Exp7/output_files/Frequency.flow.rpt
普通文件
142
Exp7/output_files/Frequency.flow.rpt
普通文件
@ -0,0 +1,142 @@
|
||||
Flow report for Frequency
|
||||
Fri Jan 16 11:36:28 2026
|
||||
Quartus Prime Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
|
||||
|
||||
---------------------
|
||||
; Table of Contents ;
|
||||
---------------------
|
||||
1. Legal Notice
|
||||
2. Flow Summary
|
||||
3. Flow Settings
|
||||
4. Flow Non-Default Global Settings
|
||||
5. Flow Elapsed Time
|
||||
6. Flow OS Summary
|
||||
7. Flow Log
|
||||
8. Flow Messages
|
||||
9. Flow Suppressed Messages
|
||||
|
||||
|
||||
|
||||
----------------
|
||||
; Legal Notice ;
|
||||
----------------
|
||||
Copyright (C) 2025 Altera Corporation. All rights reserved.
|
||||
Your use of Altera Corporation's design tools, logic functions
|
||||
and other software and tools, and any partner logic
|
||||
functions, and any output files from any of the foregoing
|
||||
(including device programming or simulation files), and any
|
||||
associated documentation or information are expressly subject
|
||||
to the terms and conditions of the Altera Program License
|
||||
Subscription Agreement, the Altera Quartus Prime License Agreement,
|
||||
the Altera IP License Agreement, or other applicable license
|
||||
agreement, including, without limitation, that your use is for
|
||||
the sole purpose of programming logic devices manufactured by
|
||||
Altera and sold by Altera or its authorized distributors. Please
|
||||
refer to the Altera Software License Subscription Agreements
|
||||
on the Quartus Prime software download page.
|
||||
|
||||
|
||||
|
||||
+--------------------------------------------------------------------------------------+
|
||||
; Flow Summary ;
|
||||
+------------------------------------+-------------------------------------------------+
|
||||
; Flow Status ; Successful - Fri Jan 16 11:36:28 2026 ;
|
||||
; Quartus Prime Version ; 25.1std.0 Build 1129 10/21/2025 SC Lite Edition ;
|
||||
; Revision Name ; Frequency ;
|
||||
; Top-level Entity Name ; Frequency ;
|
||||
; Family ; MAX 10 ;
|
||||
; Device ; 10M02SCM153I7G ;
|
||||
; Timing Models ; Final ;
|
||||
; Total logic elements ; 55 / 2,304 ( 2 % ) ;
|
||||
; Total combinational functions ; 54 / 2,304 ( 2 % ) ;
|
||||
; Dedicated logic registers ; 29 / 2,304 ( 1 % ) ;
|
||||
; Total registers ; 29 ;
|
||||
; Total pins ; 20 / 112 ( 18 % ) ;
|
||||
; Total virtual pins ; 0 ;
|
||||
; Total memory bits ; 0 / 110,592 ( 0 % ) ;
|
||||
; Embedded Multiplier 9-bit elements ; 0 / 32 ( 0 % ) ;
|
||||
; Total PLLs ; 0 / 1 ( 0 % ) ;
|
||||
; UFM blocks ; 0 / 1 ( 0 % ) ;
|
||||
; ADC blocks ; 0 ;
|
||||
+------------------------------------+-------------------------------------------------+
|
||||
|
||||
|
||||
+-----------------------------------------+
|
||||
; Flow Settings ;
|
||||
+-------------------+---------------------+
|
||||
; Option ; Setting ;
|
||||
+-------------------+---------------------+
|
||||
; Start date & time ; 01/16/2026 11:36:16 ;
|
||||
; Main task ; Compilation ;
|
||||
; Revision Name ; Frequency ;
|
||||
+-------------------+---------------------+
|
||||
|
||||
|
||||
+------------------------------------------------------------------------------------------------------------------------------------------------+
|
||||
; Flow Non-Default Global Settings ;
|
||||
+-------------------------------------+----------------------------------------+---------------+-------------+-----------------------------------+
|
||||
; Assignment Name ; Value ; Default Value ; Entity Name ; Section Id ;
|
||||
+-------------------------------------+----------------------------------------+---------------+-------------+-----------------------------------+
|
||||
; COMPILER_SIGNATURE_ID ; 66975572155680.176853457644066 ; -- ; -- ; -- ;
|
||||
; EDA_GENERATE_FUNCTIONAL_NETLIST ; Off ; -- ; -- ; eda_board_design_timing ;
|
||||
; EDA_GENERATE_FUNCTIONAL_NETLIST ; Off ; -- ; -- ; eda_board_design_boundary_scan ;
|
||||
; EDA_GENERATE_FUNCTIONAL_NETLIST ; Off ; -- ; -- ; eda_board_design_signal_integrity ;
|
||||
; EDA_GENERATE_FUNCTIONAL_NETLIST ; Off ; -- ; -- ; eda_board_design_symbol ;
|
||||
; EDA_OUTPUT_DATA_FORMAT ; Verilog Hdl ; -- ; -- ; eda_simulation ;
|
||||
; EDA_SIMULATION_TOOL ; Questa Altera FPGA (Verilog) ; <None> ; -- ; -- ;
|
||||
; EDA_TIME_SCALE ; 1 ps ; -- ; -- ; eda_simulation ;
|
||||
; MAX_CORE_JUNCTION_TEMP ; 100 ; -- ; -- ; -- ;
|
||||
; MIN_CORE_JUNCTION_TEMP ; -40 ; -- ; -- ; -- ;
|
||||
; OUTPUT_IO_TIMING_FAR_END_VMEAS ; Half Signal Swing ; -- ; -- ; -- ;
|
||||
; OUTPUT_IO_TIMING_FAR_END_VMEAS ; Half Signal Swing ; -- ; -- ; -- ;
|
||||
; OUTPUT_IO_TIMING_NEAR_END_VMEAS ; Half Vccio ; -- ; -- ; -- ;
|
||||
; OUTPUT_IO_TIMING_NEAR_END_VMEAS ; Half Vccio ; -- ; -- ; -- ;
|
||||
; PARTITION_COLOR ; -- (Not supported for targeted family) ; -- ; -- ; Top ;
|
||||
; PARTITION_FITTER_PRESERVATION_LEVEL ; -- (Not supported for targeted family) ; -- ; -- ; Top ;
|
||||
; PARTITION_NETLIST_TYPE ; -- (Not supported for targeted family) ; -- ; -- ; Top ;
|
||||
; PROJECT_OUTPUT_DIRECTORY ; output_files ; -- ; -- ; -- ;
|
||||
+-------------------------------------+----------------------------------------+---------------+-------------+-----------------------------------+
|
||||
|
||||
|
||||
+--------------------------------------------------------------------------------------------------------------------------+
|
||||
; Flow Elapsed Time ;
|
||||
+----------------------+--------------+-------------------------+---------------------+------------------------------------+
|
||||
; Module Name ; Elapsed Time ; Average Processors Used ; Peak Virtual Memory ; Total CPU Time (on all processors) ;
|
||||
+----------------------+--------------+-------------------------+---------------------+------------------------------------+
|
||||
; Analysis & Synthesis ; 00:00:04 ; 1.0 ; 482 MB ; 00:00:14 ;
|
||||
; Fitter ; 00:00:02 ; 1.2 ; 1764 MB ; 00:00:03 ;
|
||||
; Assembler ; 00:00:00 ; 1.0 ; 342 MB ; 00:00:00 ;
|
||||
; Power Analyzer ; 00:00:01 ; 1.1 ; 905 MB ; 00:00:01 ;
|
||||
; Timing Analyzer ; 00:00:01 ; 1.1 ; 573 MB ; 00:00:01 ;
|
||||
; EDA Netlist Writer ; 00:00:00 ; 1.0 ; 583 MB ; 00:00:00 ;
|
||||
; Total ; 00:00:08 ; -- ; -- ; 00:00:19 ;
|
||||
+----------------------+--------------+-------------------------+---------------------+------------------------------------+
|
||||
|
||||
|
||||
+------------------------------------------------------------------------------------+
|
||||
; Flow OS Summary ;
|
||||
+----------------------+------------------+------------+------------+----------------+
|
||||
; Module Name ; Machine Hostname ; OS Name ; OS Version ; Processor type ;
|
||||
+----------------------+------------------+------------+------------+----------------+
|
||||
; Analysis & Synthesis ; lanchunhua-PC ; Arch Linux ; Arch Linux ; x86_64 ;
|
||||
; Fitter ; lanchunhua-PC ; Arch Linux ; Arch Linux ; x86_64 ;
|
||||
; Assembler ; lanchunhua-PC ; Arch Linux ; Arch Linux ; x86_64 ;
|
||||
; Power Analyzer ; lanchunhua-PC ; Arch Linux ; Arch Linux ; x86_64 ;
|
||||
; Timing Analyzer ; lanchunhua-PC ; Arch Linux ; Arch Linux ; x86_64 ;
|
||||
; EDA Netlist Writer ; lanchunhua-PC ; Arch Linux ; Arch Linux ; x86_64 ;
|
||||
+----------------------+------------------+------------+------------+----------------+
|
||||
|
||||
|
||||
------------
|
||||
; Flow Log ;
|
||||
------------
|
||||
quartus_map --read_settings_files=on --write_settings_files=off Frequency -c Frequency
|
||||
quartus_fit --read_settings_files=off --write_settings_files=off Frequency -c Frequency
|
||||
quartus_asm --read_settings_files=off --write_settings_files=off Frequency -c Frequency
|
||||
quartus_pow --read_settings_files=off --write_settings_files=off Frequency -c Frequency
|
||||
quartus_sta Frequency -c Frequency
|
||||
quartus_eda --read_settings_files=off --write_settings_files=off Frequency -c Frequency
|
||||
|
||||
|
||||
|
||||
@ -0,0 +1,8 @@
|
||||
<sld_project_info>
|
||||
<project>
|
||||
<hash md5_digest_80b="95d7eff31ef2686d882b"/>
|
||||
</project>
|
||||
<file_info>
|
||||
<file device="10M02SCM153I7G" path="Frequency.sof" usercode="0xFFFFFFFF"/>
|
||||
</file_info>
|
||||
</sld_project_info>
|
||||
某些文件未显示,因为此 diff 中更改的文件太多 显示更多
在新工单中引用
屏蔽一个用户