这个提交包含在:
2026-01-16 11:39:59 +08:00
父节点 1e613835fe
当前提交 45098a644c
共有 429 个文件被更改,包括 17349 次插入 和 11 次删除

二进制
Exp6/db/.cmp.kpt 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.(0).cnf.cdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.(0).cnf.hdb 普通文件

二进制文件未显示。

7
Exp6/db/Counter.asm.qmsg 普通文件
查看文件

@ -0,0 +1,7 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768531771632 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768531771632 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:49:31 2026 " "Processing started: Fri Jan 16 10:49:31 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768531771632 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1768531771632 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off Counter -c Counter " "Command: quartus_asm --read_settings_files=off --write_settings_files=off Counter -c Counter" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1768531771632 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1768531771701 ""}
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1768531771758 ""}
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1768531771761 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "336 " "Peak virtual memory: 336 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768531771835 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:49:31 2026 " "Processing ended: Fri Jan 16 10:49:31 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768531771835 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768531771835 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768531771835 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1768531771835 ""}

二进制
Exp6/db/Counter.asm.rdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.asm_labs.ddb 普通文件

二进制文件未显示。

5
Exp6/db/Counter.cbx.xml 普通文件
查看文件

@ -0,0 +1,5 @@
<?xml version="1.0" ?>
<LOG_ROOT>
<PROJECT NAME="Counter">
</PROJECT>
</LOG_ROOT>

二进制
Exp6/db/Counter.cmp.bpm 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.cmp.cdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.cmp.hdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.cmp.idb 普通文件

二进制文件未显示。

48
Exp6/db/Counter.cmp.logdb 普通文件
查看文件

@ -0,0 +1,48 @@
v1
IO_RULES,NUM_CLKS_NOT_EXCEED_CLKS_AVAILABLE,INAPPLICABLE,IO_000002,Capacity Checks,Number of clocks in an I/O bank should not exceed the number of clocks available.,Critical,No Global Signal assignments found.,,I/O,,
IO_RULES,NUM_PINS_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000001,Capacity Checks,Number of pins in an I/O bank should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
IO_RULES,NUM_VREF_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000003,Capacity Checks,Number of pins in a Vrefgroup should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
IO_RULES,IO_BANK_SUPPORT_VCCIO,INAPPLICABLE,IO_000004,Voltage Compatibility Checks,The I/O bank should support the requested VCCIO.,Critical,No IOBANK_VCCIO assignments found.,,I/O,,
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VREF,INAPPLICABLE,IO_000005,Voltage Compatibility Checks,The I/O bank should not have competing VREF values.,Critical,No VREF I/O Standard assignments found.,,I/O,,
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VCCIO,PASS,IO_000006,Voltage Compatibility Checks,The I/O bank should not have competing VCCIO values.,Critical,0 such failures found.,,I/O,,
IO_RULES,CHECK_UNAVAILABLE_LOC,PASS,IO_000007,Valid Location Checks,Checks for unavailable locations.,Critical,0 such failures found.,,I/O,,
IO_RULES,CHECK_RESERVED_LOC,INAPPLICABLE,IO_000008,Valid Location Checks,Checks for reserved locations.,Critical,No reserved LogicLock region found.,,I/O,,
IO_RULES,OCT_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000047,I/O Properties Checks for One I/O,On Chip Termination and Slew Rate should not be used at the same time.,Critical,No Slew Rate assignments found.,,I/O,,
IO_RULES,LOC_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000046,I/O Properties Checks for One I/O,The location should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000045,I/O Properties Checks for One I/O,The I/O standard should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
IO_RULES,WEAK_PULL_UP_AND_BUS_HOLD_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000027,I/O Properties Checks for One I/O,Weak Pull Up and Bus Hold should not be used at the same time.,Critical,No Enable Bus-Hold Circuitry or Weak Pull-Up Resistor assignments found.,,I/O,,
IO_RULES,OCT_AND_CURRENT_STRENGTH_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000026,I/O Properties Checks for One I/O,On Chip Termination and Current Strength should not be used at the same time.,Critical,No Current Strength or Termination assignments found.,,I/O,,
IO_RULES,IO_DIR_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000024,I/O Properties Checks for One I/O,The I/O direction should support the On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_OPEN_DRAIN_VALUE,INAPPLICABLE,IO_000023,I/O Properties Checks for One I/O,The I/O standard should support the Open Drain value.,Critical,No open drain assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000022,I/O Properties Checks for One I/O,The I/O standard should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000021,I/O Properties Checks for One I/O,The I/O standard should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_PCI_CLAMP_DIODE,PASS,IO_000020,I/O Properties Checks for One I/O,The I/O standard should support the requested PCI Clamp Diode.,Critical,0 such failures found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000019,I/O Properties Checks for One I/O,The I/O standard should support the requested On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000018,I/O Properties Checks for One I/O,The I/O standard should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_PCI_CLAMP_DIODE,PASS,IO_000015,I/O Properties Checks for One I/O,The location should support the requested PCI Clamp Diode.,Critical,0 such failures found.,,I/O,,
IO_RULES,LOC_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000014,I/O Properties Checks for One I/O,The location should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000013,I/O Properties Checks for One I/O,The location should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000012,I/O Properties Checks for One I/O,The location should support the requested On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000011,I/O Properties Checks for One I/O,The location should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_IO_DIR,PASS,IO_000010,I/O Properties Checks for One I/O,The location should support the requested I/O direction.,Critical,0 such failures found.,,I/O,,
IO_RULES,LOC_SUPPORT_IO_STD,PASS,IO_000009,I/O Properties Checks for One I/O,The location should support the requested I/O standard.,Critical,0 such failures found.,,I/O,,
IO_RULES,CURRENT_DENSITY_FOR_CONSECUTIVE_IO_NOT_EXCEED_CURRENT_VALUE,PASS,IO_000033,Electromigration Checks,Current density for consecutive I/Os should not exceed 160mA for row I/Os and 160mA for column I/Os.,Critical,0 such failures found.,,I/O,,
IO_RULES,SINGLE_ENDED_OUTPUTS_LAB_ROWS_FROM_DIFF_IO,INAPPLICABLE,IO_000034,SI Related Distance Checks,Single-ended outputs should be 5 LAB row(s) away from a differential I/O.,High,No Differential I/O Standard assignments found.,,I/O,,
IO_RULES,MAX_20_OUTPUTS_ALLOWED_IN_VREFGROUP,INAPPLICABLE,IO_000042,SI Related SSO Limit Checks,No more than 20 outputs are allowed in a VREF group when VREF is being read from.,High,No VREF I/O Standard assignments found.,,I/O,,
IO_RULES_MATRIX,Pin/Rules,IO_000002;IO_000001;IO_000003;IO_000004;IO_000005;IO_000006;IO_000007;IO_000008;IO_000047;IO_000046;IO_000045;IO_000027;IO_000026;IO_000024;IO_000023;IO_000022;IO_000021;IO_000020;IO_000019;IO_000018;IO_000015;IO_000014;IO_000013;IO_000012;IO_000011;IO_000010;IO_000009;IO_000033;IO_000034;IO_000042,
IO_RULES_MATRIX,Total Pass,0;7;7;0;0;7;7;0;0;0;0;0;0;0;0;0;0;3;0;0;3;0;0;0;0;7;7;7;0;0,
IO_RULES_MATRIX,Total Unchecked,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
IO_RULES_MATRIX,Total Inapplicable,7;0;0;7;7;0;0;7;7;7;7;7;7;7;7;7;7;4;7;7;4;7;7;7;7;0;0;0;7;7,
IO_RULES_MATRIX,Total Fail,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
IO_RULES_MATRIX,led[3],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
IO_RULES_MATRIX,led[2],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
IO_RULES_MATRIX,led[1],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
IO_RULES_MATRIX,led[0],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
IO_RULES_MATRIX,rst,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
IO_RULES_MATRIX,func,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
IO_RULES_MATRIX,clk,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
IO_RULES_SUMMARY,Total I/O Rules,30,
IO_RULES_SUMMARY,Number of I/O Rules Passed,9,
IO_RULES_SUMMARY,Number of I/O Rules Failed,0,
IO_RULES_SUMMARY,Number of I/O Rules Unchecked,0,
IO_RULES_SUMMARY,Number of I/O Rules Inapplicable,21,

二进制
Exp6/db/Counter.cmp.rdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.cmp_merge.kpt 普通文件

二进制文件未显示。

3
Exp6/db/Counter.db_info 普通文件
查看文件

@ -0,0 +1,3 @@
Quartus_Version = Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
Version_Index = 604268800
Creation_Time = Fri Jan 16 11:09:13 2026

6
Exp6/db/Counter.eda.qmsg 普通文件
查看文件

@ -0,0 +1,6 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768531775850 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768531775851 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:49:35 2026 " "Processing started: Fri Jan 16 10:49:35 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768531775851 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768531775851 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off Counter -c Counter " "Command: quartus_eda --read_settings_files=off --write_settings_files=off Counter -c Counter" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768531775851 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1768531775937 ""}
{ "Info" "IWSC_DONE_HDL_GENERATION" "Counter.vo /home/lanshuye/Projects/DCExp/Exp6/simulation/questa/ simulation " "Generated file Counter.vo in folder \"/home/lanshuye/Projects/DCExp/Exp6/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1768531775959 ""}
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "586 " "Peak virtual memory: 586 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768531775964 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:49:35 2026 " "Processing ended: Fri Jan 16 10:49:35 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768531775964 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768531775964 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768531775964 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768531775964 ""}

52
Exp6/db/Counter.fit.qmsg 普通文件
查看文件

@ -0,0 +1,52 @@
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1768531768775 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1768531768775 ""}
{ "Info" "IMPP_MPP_USER_DEVICE" "Counter 10M02SCM153I7G " "Selected device 10M02SCM153I7G for design \"Counter\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1768531768779 ""}
{ "Info" "IMPP_MPP_BOOT_SEL_PIN_NOT_RESERVED" "" "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." { } { } 0 22896 "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." 0 0 "Fitter" 0 -1 1768531768792 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768531768793 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768531768793 ""}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1768531768826 ""}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1768531768828 ""}
{ "Critical Warning" "WFCUDA_FCUDA_SPS_DEVICE_POWER_LIMITATION" "" "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." { } { } 1 16562 "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." 0 0 "Fitter" 0 -1 1768531768844 ""}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M08SCM153I7G " "Device 10M08SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768531768845 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M04SCM153I7G " "Device 10M04SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768531768845 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1768531768845 ""}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "7 " "Fitter converted 7 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TMS~ G1 " "Pin ~ALTERA_TMS~ is reserved at location G1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TMS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 54 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768531768846 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TCK~ J1 " "Pin ~ALTERA_TCK~ is reserved at location J1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TCK~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 56 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768531768846 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDI~ H5 " "Pin ~ALTERA_TDI~ is reserved at location H5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDI~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 58 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768531768846 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDO~ H4 " "Pin ~ALTERA_TDO~ is reserved at location H4" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDO~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 60 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768531768846 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCONFIG~ E8 " "Pin ~ALTERA_nCONFIG~ is reserved at location E8" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nCONFIG~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 62 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768531768846 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nSTATUS~ D6 " "Pin ~ALTERA_nSTATUS~ is reserved at location D6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nSTATUS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 64 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768531768846 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONF_DONE~ E6 " "Pin ~ALTERA_CONF_DONE~ is reserved at location E6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_CONF_DONE~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 66 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768531768846 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1768531768846 ""}
{ "Info" "IFIOMGR_RESERVE_PIN_NO_DATA0" "" "DATA\[0\] dual-purpose pin not reserved" { } { } 0 169141 "DATA\[0\] dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768531768846 ""}
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "Data\[1\]/ASDO " "Data\[1\]/ASDO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768531768846 ""}
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "nCSO " "nCSO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768531768846 ""}
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "DCLK " "DCLK dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768531768846 ""}
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1768531768846 ""}
{ "Warning" "WTDB_ANALYZE_COMB_LATCHES" "1 " "The Timing Analyzer is analyzing 1 combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." { } { } 0 335093 "The Timing Analyzer is analyzing %1!d! combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." 0 0 "Fitter" 0 -1 1768531769052 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Counter.sdc " "Synopsys Design Constraints File file not found: 'Counter.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1768531769052 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1768531769052 ""}
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1768531769053 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Fitter" 0 -1 1768531769053 ""}
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1768531769053 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1768531769238 ""}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768531769238 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768531769238 ""}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768531769239 ""}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768531769239 ""}
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1768531769239 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1768531769239 ""}
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1768531769239 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1768531769240 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1768531769240 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1768531769240 ""}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:01 " "Fitter preparation operations ending: elapsed time is 00:00:01" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768531769244 ""}
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1768531769248 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1768531769480 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768531769494 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1768531769499 ""}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1768531769625 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768531769625 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1768531769838 ""}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X9_Y0 X18_Y8 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8" { } { { "loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8"} { { 12 { 0 ""} 9 0 10 9 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1768531769929 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1768531769929 ""}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1768531769987 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1768531769987 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768531769987 ""}
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.06 " "Total time spent on timing analysis during the Fitter is 0.06 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1768531770083 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768531770086 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768531770188 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768531770188 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768531770297 ""}
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768531770559 ""}
{ "Warning" "WFIOMGR_FIOMGR_REFER_APPNOTE_447_TOP_LEVEL" "3 MAX 10 " "3 pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing MAX 10 Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." { { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "rst 3.3-V LVTTL J14 " "Pin rst uses I/O standard 3.3-V LVTTL at J14" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { rst } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "rst" } } } } { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 3 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 9 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768531770575 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "func 3.3-V LVTTL J12 " "Pin func uses I/O standard 3.3-V LVTTL at J12" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { func } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "func" } } } } { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 2 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 8 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768531770575 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "clk 3.3-V LVTTL J9 " "Pin clk uses I/O standard 3.3-V LVTTL at J9" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { clk } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "clk" } } } } { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 4 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 10 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768531770575 ""} } { } 0 169177 "%1!d! pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing %2!s! Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." 0 0 "Fitter" 0 -1 1768531770575 ""}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "/home/lanshuye/Projects/DCExp/Exp6/output_files/Counter.fit.smsg " "Generated suppressed messages file /home/lanshuye/Projects/DCExp/Exp6/output_files/Counter.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1768531770585 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 7 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 7 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1748 " "Peak virtual memory: 1748 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768531770700 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:49:30 2026 " "Processing ended: Fri Jan 16 10:49:30 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768531770700 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:02 " "Elapsed time: 00:00:02" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768531770700 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:03 " "Total CPU time (on all processors): 00:00:03" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768531770700 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1768531770700 ""}

23
Exp6/db/Counter.hier_info 普通文件
查看文件

@ -0,0 +1,23 @@
|Counter
func => counter.OUTPUTSELECT
func => counter.OUTPUTSELECT
func => counter.OUTPUTSELECT
func => counter.OUTPUTSELECT
func => counter[0].ADATA
func => counter[1].ADATA
func => counter[2].ADATA
func => counter[3].ADATA
rst => counter[3].ALOAD
rst => counter[2].ALOAD
rst => counter[1].ALOAD
rst => counter[0].ALOAD
clk => counter[3].CLK
clk => counter[2].CLK
clk => counter[1].CLK
clk => counter[0].CLK
led[3] <= counter[3].DB_MAX_OUTPUT_PORT_TYPE
led[2] <= counter[2].DB_MAX_OUTPUT_PORT_TYPE
led[1] <= counter[1].DB_MAX_OUTPUT_PORT_TYPE
led[0] <= counter[0].DB_MAX_OUTPUT_PORT_TYPE

二进制
Exp6/db/Counter.hif 普通文件

二进制文件未显示。

18
Exp6/db/Counter.lpc.html 普通文件
查看文件

@ -0,0 +1,18 @@
<TABLE>
<TR bgcolor="#C0C0C0">
<TH>Hierarchy</TH>
<TH>Input</TH>
<TH>Constant Input</TH>
<TH>Unused Input</TH>
<TH>Floating Input</TH>
<TH>Output</TH>
<TH>Constant Output</TH>
<TH>Unused Output</TH>
<TH>Floating Output</TH>
<TH>Bidir</TH>
<TH>Constant Bidir</TH>
<TH>Unused Bidir</TH>
<TH>Input only Bidir</TH>
<TH>Output only Bidir</TH>
</TR>
</TABLE>

二进制
Exp6/db/Counter.lpc.rdb 普通文件

二进制文件未显示。

5
Exp6/db/Counter.lpc.txt 普通文件
查看文件

@ -0,0 +1,5 @@
+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
; Legal Partition Candidates ;
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+
; Hierarchy ; Input ; Constant Input ; Unused Input ; Floating Input ; Output ; Constant Output ; Unused Output ; Floating Output ; Bidir ; Constant Bidir ; Unused Bidir ; Input only Bidir ; Output only Bidir ;
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+

二进制
Exp6/db/Counter.map.ammdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.map.bpm 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.map.cdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.map.hdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.map.kpt 普通文件

二进制文件未显示。

1
Exp6/db/Counter.map.logdb 普通文件
查看文件

@ -0,0 +1 @@
v1

13
Exp6/db/Counter.map.qmsg 普通文件
查看文件

@ -0,0 +1,13 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768531763918 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768531763918 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:49:23 2026 " "Processing started: Fri Jan 16 10:49:23 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768531763918 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768531763918 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off Counter -c Counter " "Command: quartus_map --read_settings_files=on --write_settings_files=off Counter -c Counter" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768531763918 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1768531763996 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1768531763996 ""}
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Counter.v 1 1 " "Found 1 design units, including 1 entities, in source file Counter.v" { { "Info" "ISGN_ENTITY_NAME" "1 Counter " "Found entity 1: Counter" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768531767529 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768531767529 ""}
{ "Info" "ISGN_START_ELABORATION_TOP" "Counter " "Elaborating entity \"Counter\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1768531767548 ""}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 4 Counter.v(14) " "Verilog HDL assignment warning at Counter.v(14): truncated value with size 32 to match size of target (4)" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 14 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1768531767549 "|Counter"}
{ "Warning" "WMLS_MLS_CREATED_ALOAD_CCT" "" "Presettable and clearable registers converted to equivalent circuits with latches. Registers power-up to an undefined state, and DEVCLRn places the registers in an undefined state." { { "Warning" "WMLS_MLS_CREATED_ALOAD_CCT_SUB" "counter\[3\] counter\[3\]~_emulated counter\[3\]~1 " "Register \"counter\[3\]\" is converted into an equivalent circuit using register \"counter\[3\]~_emulated\" and latch \"counter\[3\]~1\"" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 14 -1 0 } } } 0 13310 "Register \"%1!s!\" is converted into an equivalent circuit using register \"%2!s!\" and latch \"%3!s!\"" 0 0 "Design Software" 0 -1 1768531767663 "|Counter|counter[3]"} { "Warning" "WMLS_MLS_CREATED_ALOAD_CCT_SUB" "counter\[2\] counter\[2\]~_emulated counter\[3\]~1 " "Register \"counter\[2\]\" is converted into an equivalent circuit using register \"counter\[2\]~_emulated\" and latch \"counter\[3\]~1\"" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 14 -1 0 } } } 0 13310 "Register \"%1!s!\" is converted into an equivalent circuit using register \"%2!s!\" and latch \"%3!s!\"" 0 0 "Design Software" 0 -1 1768531767663 "|Counter|counter[2]"} { "Warning" "WMLS_MLS_CREATED_ALOAD_CCT_SUB" "counter\[1\] counter\[1\]~_emulated counter\[3\]~1 " "Register \"counter\[1\]\" is converted into an equivalent circuit using register \"counter\[1\]~_emulated\" and latch \"counter\[3\]~1\"" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 14 -1 0 } } } 0 13310 "Register \"%1!s!\" is converted into an equivalent circuit using register \"%2!s!\" and latch \"%3!s!\"" 0 0 "Design Software" 0 -1 1768531767663 "|Counter|counter[1]"} { "Warning" "WMLS_MLS_CREATED_ALOAD_CCT_SUB" "counter\[0\] counter\[0\]~_emulated counter\[3\]~1 " "Register \"counter\[0\]\" is converted into an equivalent circuit using register \"counter\[0\]~_emulated\" and latch \"counter\[3\]~1\"" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 14 -1 0 } } } 0 13310 "Register \"%1!s!\" is converted into an equivalent circuit using register \"%2!s!\" and latch \"%3!s!\"" 0 0 "Design Software" 0 -1 1768531767663 "|Counter|counter[0]"} } { } 0 13004 "Presettable and clearable registers converted to equivalent circuits with latches. Registers power-up to an undefined state, and DEVCLRn places the registers in an undefined state." 0 0 "Analysis & Synthesis" 0 -1 1768531767663 ""}
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1768531767683 ""}
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1768531767817 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768531767817 ""}
{ "Info" "ICUT_CUT_TM_SUMMARY" "20 " "Implemented 20 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "3 " "Implemented 3 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1768531767828 ""} { "Info" "ICUT_CUT_TM_OPINS" "4 " "Implemented 4 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1768531767828 ""} { "Info" "ICUT_CUT_TM_LCELLS" "13 " "Implemented 13 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1768531767828 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1768531767828 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 7 s Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 7 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "461 " "Peak virtual memory: 461 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768531767830 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:49:27 2026 " "Processing ended: Fri Jan 16 10:49:27 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768531767830 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768531767830 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:13 " "Total CPU time (on all processors): 00:00:13" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768531767830 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768531767830 ""}

二进制
Exp6/db/Counter.map.rdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.map_bb.cdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.map_bb.hdb 普通文件

二进制文件未显示。

查看文件

@ -0,0 +1 @@
v1

21
Exp6/db/Counter.pow.qmsg 普通文件
查看文件

@ -0,0 +1,21 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768531772698 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Power Analyzer Quartus Prime " "Running Quartus Prime Power Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768531772698 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:49:32 2026 " "Processing started: Fri Jan 16 10:49:32 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768531772698 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Power Analyzer" 0 -1 1768531772698 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_pow --read_settings_files=off --write_settings_files=off Counter -c Counter " "Command: quartus_pow --read_settings_files=off --write_settings_files=off Counter -c Counter" { } { } 0 0 "Command: %1!s!" 0 0 "Power Analyzer" 0 -1 1768531772698 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Power Analyzer" 0 -1 1768531772783 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768531772785 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768531772785 ""}
{ "Warning" "WTDB_ANALYZE_COMB_LATCHES" "1 " "The Timing Analyzer is analyzing 1 combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." { } { } 0 335093 "The Timing Analyzer is analyzing %1!d! combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." 0 0 "Power Analyzer" 0 -1 1768531772906 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Counter.sdc " "Synopsys Design Constraints File file not found: 'Counter.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Power Analyzer" 0 -1 1768531772907 ""}
{ "Warning" "WSTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT" "clk " "Node: clk was determined to be a clock but was found without an associated clock assignment." { { "Info" "ISTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT_DETAILS" "Register counter\[3\]~_emulated clk " "Register counter\[3\]~_emulated is being clocked by clk" { } { } 0 13166 "%1!s! %2!s! is being clocked by %3!s!" 0 0 "Design Software" 0 -1 1768531772907 ""} } { } 0 332060 "Node: %1!s! was determined to be a clock but was found without an associated clock assignment." 0 0 "Power Analyzer" 0 -1 1768531772907 "|Counter|clk"}
{ "Warning" "WSTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT" "rst " "Node: rst was determined to be a clock but was found without an associated clock assignment." { { "Info" "ISTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT_DETAILS" "Latch counter\[3\]~1 rst " "Latch counter\[3\]~1 is being clocked by rst" { } { } 0 13166 "%1!s! %2!s! is being clocked by %3!s!" 0 0 "Design Software" 0 -1 1768531772907 ""} } { } 0 332060 "Node: %1!s! was determined to be a clock but was found without an associated clock assignment." 0 0 "Power Analyzer" 0 -1 1768531772907 "|Counter|rst"}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Power Analyzer" 0 -1 1768531772907 ""}
{ "Info" "IPVA_PVA_START_CALCULATION" "" "Starting Vectorless Power Activity Estimation" { } { } 0 223000 "Starting Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768531772909 ""}
{ "Warning" "WPUTIL_PUTIL_NO_CLK_DOMAINS_FOUND" "" "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" { } { } 0 222013 "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" 0 0 "Power Analyzer" 0 -1 1768531772909 ""}
{ "Info" "IPVA_PVA_END_CALCULATION" "" "Completed Vectorless Power Activity Estimation" { } { } 0 223001 "Completed Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768531772910 ""}
{ "Info" "IPATFAM_USING_ADVANCED_IO_POWER" "" "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" { } { } 0 218000 "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" 0 0 "Power Analyzer" 0 -1 1768531773028 ""}
{ "Warning" "WPAN_PAN_NO_THERMAL_MODEL_SELECTED" "" "No board thermal model was selected. Analyzing without board thermal modeling." { } { } 0 215044 "No board thermal model was selected. Analyzing without board thermal modeling." 0 0 "Power Analyzer" 0 -1 1768531773029 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Power Analyzer" 0 -1 1768531773048 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Power Analyzer" 0 -1 1768531773156 ""}
{ "Info" "IPAN_AVG_TOGGLE_RATE_PER_DESIGN" "0.000 millions of transitions / sec " "Average toggle rate for this design is 0.000 millions of transitions / sec" { } { } 0 215049 "Average toggle rate for this design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768531773246 ""}
{ "Info" "IPAN_PAN_TOTAL_POWER_ESTIMATION" "113.02 mW " "Total thermal power estimate for the design is 113.02 mW" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "" { Report "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "Compiler" "" "" "" "" { } "PowerPlay Power Analyzer Summary" } } } 0 215031 "Total thermal power estimate for the design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768531773258 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Power Analyzer 0 s 8 s Quartus Prime " "Quartus Prime Power Analyzer was successful. 0 errors, 8 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "872 " "Peak virtual memory: 872 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768531773312 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:49:33 2026 " "Processing ended: Fri Jan 16 10:49:33 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768531773312 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768531773312 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768531773312 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Power Analyzer" 0 -1 1768531773312 ""}

二进制
Exp6/db/Counter.pplq.rdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.pre_map.hdb 普通文件

二进制文件未显示。

二进制文件未显示。

二进制
Exp6/db/Counter.routing.rdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.rtlv.hdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.rtlv_sg.cdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.rtlv_sg_swap.cdb 普通文件

二进制文件未显示。

二进制
Exp6/db/Counter.sld_design_entry.sci 普通文件

二进制文件未显示。

二进制文件未显示。

查看文件

@ -0,0 +1 @@
DONE

44
Exp6/db/Counter.sta.qmsg 普通文件
查看文件

@ -0,0 +1,44 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768531774208 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768531774209 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:49:34 2026 " "Processing started: Fri Jan 16 10:49:34 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768531774209 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1768531774209 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta Counter -c Counter " "Command: quartus_sta Counter -c Counter" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1768531774209 ""}
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1768531774225 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1768531774267 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1768531774267 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774280 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774280 ""}
{ "Warning" "WTDB_ANALYZE_COMB_LATCHES" "1 " "The Timing Analyzer is analyzing 1 combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." { } { } 0 335093 "The Timing Analyzer is analyzing %1!d! combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." 0 0 "Timing Analyzer" 0 -1 1768531774319 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Counter.sdc " "Synopsys Design Constraints File file not found: 'Counter.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1768531774321 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774321 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_INFO" "Deriving Clocks " "Deriving Clocks" { { "Info" "ISTA_DERIVE_CLOCKS_INFO" "create_clock -period 1.000 -name clk clk " "create_clock -period 1.000 -name clk clk" { } { } 0 332105 "%1!s!" 0 0 "Design Software" 0 -1 1768531774322 ""} { "Info" "ISTA_DERIVE_CLOCKS_INFO" "create_clock -period 1.000 -name rst rst " "create_clock -period 1.000 -name rst rst" { } { } 0 332105 "%1!s!" 0 0 "Design Software" 0 -1 1768531774322 ""} } { } 0 332105 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768531774322 ""}
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1768531774322 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768531774322 ""}
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1768531774322 ""}
{ "Info" "0" "" "Analyzing Slow 1200mV 100C Model" { } { } 0 0 "Analyzing Slow 1200mV 100C Model" 0 0 "Timing Analyzer" 0 0 1768531774324 ""}
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1768531774325 ""}
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768531774325 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -2.731 " "Worst-case setup slack is -2.731" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774325 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774325 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -2.731 -9.786 clk " " -2.731 -9.786 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774325 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774325 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.942 " "Worst-case hold slack is 0.942" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774326 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774326 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.942 0.000 clk " " 0.942 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774326 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774326 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "recovery -1.550 " "Worst-case recovery slack is -1.550" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774326 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774326 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -1.550 -6.200 clk " " -1.550 -6.200 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774326 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774326 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "removal 1.496 " "Worst-case removal slack is 1.496" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774326 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774326 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 1.496 0.000 clk " " 1.496 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774326 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774326 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774327 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774327 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -8.612 clk " " -3.000 -8.612 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774327 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -3.000 rst " " -3.000 -3.000 rst " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774327 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774327 ""}
{ "Info" "0" "" "Analyzing Slow 1200mV -40C Model" { } { } 0 0 "Analyzing Slow 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768531774330 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1768531774339 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1768531774452 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768531774462 ""}
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768531774463 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -2.268 " "Worst-case setup slack is -2.268" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774463 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774463 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -2.268 -8.261 clk " " -2.268 -8.261 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774463 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774463 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.748 " "Worst-case hold slack is 0.748" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774464 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774464 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.748 0.000 clk " " 0.748 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774464 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774464 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "recovery -1.185 " "Worst-case recovery slack is -1.185" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774464 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774464 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -1.185 -4.740 clk " " -1.185 -4.740 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774464 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774464 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "removal 1.362 " "Worst-case removal slack is 1.362" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774465 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774465 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 1.362 0.000 clk " " 1.362 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774465 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774465 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774465 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774465 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -8.612 clk " " -3.000 -8.612 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774465 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -3.000 rst " " -3.000 -3.000 rst " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774465 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774465 ""}
{ "Info" "0" "" "Analyzing Fast 1200mV -40C Model" { } { } 0 0 "Analyzing Fast 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768531774468 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768531774512 ""}
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768531774512 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -1.058 " "Worst-case setup slack is -1.058" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774512 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774512 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -1.058 -3.946 clk " " -1.058 -3.946 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774512 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774512 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.314 " "Worst-case hold slack is 0.314" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774513 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774513 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.314 0.000 clk " " 0.314 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774513 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774513 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "recovery -0.926 " "Worst-case recovery slack is -0.926" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774513 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774513 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -0.926 -3.704 clk " " -0.926 -3.704 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774513 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774513 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "removal 0.614 " "Worst-case removal slack is 0.614" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774514 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774514 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.614 0.000 clk " " 0.614 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774514 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774514 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774514 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774514 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -7.788 clk " " -3.000 -7.788 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774514 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -3.000 rst " " -3.000 -3.000 rst " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768531774514 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768531774514 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768531774935 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768531774935 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "567 " "Peak virtual memory: 567 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768531774946 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:49:34 2026 " "Processing ended: Fri Jan 16 10:49:34 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768531774946 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768531774946 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768531774946 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1768531774946 ""}

二进制
Exp6/db/Counter.sta.rdb 普通文件

二进制文件未显示。

二进制文件未显示。

二进制
Exp6/db/Counter.tis_db_list.ddb 普通文件

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

4
Exp6/db/Counter.tmw_info 普通文件
查看文件

@ -0,0 +1,4 @@
start_full_compilation:s
start_assembler:s-start_full_compilation
start_timing_analyzer:s-start_full_compilation
start_eda_netlist_writer:s-start_full_compilation

二进制
Exp6/db/Counter.vpr.ammdb 普通文件

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

查看文件

@ -0,0 +1,37 @@
{
"partitions" : [
{
"name" : "Top",
"pins" : [
{
"name" : "led[3]",
"strict" : false
},
{
"name" : "led[2]",
"strict" : false
},
{
"name" : "led[1]",
"strict" : false
},
{
"name" : "led[0]",
"strict" : false
},
{
"name" : "rst",
"strict" : false
},
{
"name" : "func",
"strict" : false
},
{
"name" : "clk",
"strict" : false
}
]
}
]
}

查看文件

@ -0,0 +1,150 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768530112328 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768530112328 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:21:52 2026 " "Processing started: Fri Jan 16 10:21:52 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768530112328 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768530112328 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off Counter -c Counter " "Command: quartus_map --read_settings_files=on --write_settings_files=off Counter -c Counter" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768530112328 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1768530112405 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1768530112405 ""}
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Counter.v 1 1 " "Found 1 design units, including 1 entities, in source file Counter.v" { { "Info" "ISGN_ENTITY_NAME" "1 Counter " "Found entity 1: Counter" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768530116023 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768530116023 ""}
{ "Info" "ISGN_START_ELABORATION_TOP" "Counter " "Elaborating entity \"Counter\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1768530116043 ""}
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "32 4 Counter.v(14) " "Verilog HDL assignment warning at Counter.v(14): truncated value with size 32 to match size of target (4)" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 14 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1768530116044 "|Counter"}
{ "Warning" "WMLS_MLS_CREATED_ALOAD_CCT" "" "Presettable and clearable registers converted to equivalent circuits with latches. Registers power-up to an undefined state, and DEVCLRn places the registers in an undefined state." { { "Warning" "WMLS_MLS_CREATED_ALOAD_CCT_SUB" "counter\[3\] counter\[3\]~_emulated counter\[3\]~1 " "Register \"counter\[3\]\" is converted into an equivalent circuit using register \"counter\[3\]~_emulated\" and latch \"counter\[3\]~1\"" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 14 -1 0 } } } 0 13310 "Register \"%1!s!\" is converted into an equivalent circuit using register \"%2!s!\" and latch \"%3!s!\"" 0 0 "Design Software" 0 -1 1768530116154 "|Counter|counter[3]"} { "Warning" "WMLS_MLS_CREATED_ALOAD_CCT_SUB" "counter\[2\] counter\[2\]~_emulated counter\[3\]~1 " "Register \"counter\[2\]\" is converted into an equivalent circuit using register \"counter\[2\]~_emulated\" and latch \"counter\[3\]~1\"" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 14 -1 0 } } } 0 13310 "Register \"%1!s!\" is converted into an equivalent circuit using register \"%2!s!\" and latch \"%3!s!\"" 0 0 "Design Software" 0 -1 1768530116154 "|Counter|counter[2]"} { "Warning" "WMLS_MLS_CREATED_ALOAD_CCT_SUB" "counter\[1\] counter\[1\]~_emulated counter\[3\]~1 " "Register \"counter\[1\]\" is converted into an equivalent circuit using register \"counter\[1\]~_emulated\" and latch \"counter\[3\]~1\"" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 14 -1 0 } } } 0 13310 "Register \"%1!s!\" is converted into an equivalent circuit using register \"%2!s!\" and latch \"%3!s!\"" 0 0 "Design Software" 0 -1 1768530116154 "|Counter|counter[1]"} { "Warning" "WMLS_MLS_CREATED_ALOAD_CCT_SUB" "counter\[0\] counter\[0\]~_emulated counter\[3\]~1 " "Register \"counter\[0\]\" is converted into an equivalent circuit using register \"counter\[0\]~_emulated\" and latch \"counter\[3\]~1\"" { } { { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 14 -1 0 } } } 0 13310 "Register \"%1!s!\" is converted into an equivalent circuit using register \"%2!s!\" and latch \"%3!s!\"" 0 0 "Design Software" 0 -1 1768530116154 "|Counter|counter[0]"} } { } 0 13004 "Presettable and clearable registers converted to equivalent circuits with latches. Registers power-up to an undefined state, and DEVCLRn places the registers in an undefined state." 0 0 "Analysis & Synthesis" 0 -1 1768530116154 ""}
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1768530116174 ""}
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1768530116305 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768530116305 ""}
{ "Info" "ICUT_CUT_TM_SUMMARY" "20 " "Implemented 20 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "3 " "Implemented 3 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1768530116316 ""} { "Info" "ICUT_CUT_TM_OPINS" "4 " "Implemented 4 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1768530116316 ""} { "Info" "ICUT_CUT_TM_LCELLS" "13 " "Implemented 13 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1768530116316 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1768530116316 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 7 s Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 7 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "493 " "Peak virtual memory: 493 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768530116319 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:21:56 2026 " "Processing ended: Fri Jan 16 10:21:56 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768530116319 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768530116319 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:13 " "Total CPU time (on all processors): 00:00:13" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768530116319 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768530116319 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Analysis & Synthesis" 0 -1 1768530117182 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus Prime " "Running Quartus Prime Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768530117182 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:21:57 2026 " "Processing started: Fri Jan 16 10:21:57 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768530117182 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Fitter" 0 -1 1768530117182 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off Counter -c Counter " "Command: quartus_fit --read_settings_files=off --write_settings_files=off Counter -c Counter" { } { } 0 0 "Command: %1!s!" 0 0 "Fitter" 0 -1 1768530117182 ""}
{ "Info" "0" "" "qfit2_default_script.tcl version: #1" { } { } 0 0 "qfit2_default_script.tcl version: #1" 0 0 "Fitter" 0 0 1768530117197 ""}
{ "Info" "0" "" "Project = Counter" { } { } 0 0 "Project = Counter" 0 0 "Fitter" 0 0 1768530117197 ""}
{ "Info" "0" "" "Revision = Counter" { } { } 0 0 "Revision = Counter" 0 0 "Fitter" 0 0 1768530117197 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1768530117234 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1768530117234 ""}
{ "Info" "IMPP_MPP_USER_DEVICE" "Counter 10M02SCM153I7G " "Selected device 10M02SCM153I7G for design \"Counter\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1768530117237 ""}
{ "Info" "IMPP_MPP_BOOT_SEL_PIN_NOT_RESERVED" "" "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." { } { } 0 22896 "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." 0 0 "Fitter" 0 -1 1768530117255 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768530117256 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768530117256 ""}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1768530117288 ""}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1768530117290 ""}
{ "Critical Warning" "WFCUDA_FCUDA_SPS_DEVICE_POWER_LIMITATION" "" "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." { } { } 1 16562 "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." 0 0 "Fitter" 0 -1 1768530117307 ""}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M08SCM153I7G " "Device 10M08SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768530117308 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M04SCM153I7G " "Device 10M04SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768530117308 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1768530117308 ""}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "7 " "Fitter converted 7 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TMS~ G1 " "Pin ~ALTERA_TMS~ is reserved at location G1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TMS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 54 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768530117309 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TCK~ J1 " "Pin ~ALTERA_TCK~ is reserved at location J1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TCK~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 56 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768530117309 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDI~ H5 " "Pin ~ALTERA_TDI~ is reserved at location H5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDI~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 58 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768530117309 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDO~ H4 " "Pin ~ALTERA_TDO~ is reserved at location H4" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDO~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 60 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768530117309 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCONFIG~ E8 " "Pin ~ALTERA_nCONFIG~ is reserved at location E8" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nCONFIG~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 62 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768530117309 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nSTATUS~ D6 " "Pin ~ALTERA_nSTATUS~ is reserved at location D6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nSTATUS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 64 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768530117309 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONF_DONE~ E6 " "Pin ~ALTERA_CONF_DONE~ is reserved at location E6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_CONF_DONE~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 66 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768530117309 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1768530117309 ""}
{ "Info" "IFIOMGR_RESERVE_PIN_NO_DATA0" "" "DATA\[0\] dual-purpose pin not reserved" { } { } 0 169141 "DATA\[0\] dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768530117310 ""}
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "Data\[1\]/ASDO " "Data\[1\]/ASDO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768530117310 ""}
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "nCSO " "nCSO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768530117310 ""}
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "DCLK " "DCLK dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768530117310 ""}
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1768530117310 ""}
{ "Warning" "WTDB_ANALYZE_COMB_LATCHES" "1 " "The Timing Analyzer is analyzing 1 combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." { } { } 0 335093 "The Timing Analyzer is analyzing %1!d! combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." 0 0 "Fitter" 0 -1 1768530117514 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Counter.sdc " "Synopsys Design Constraints File file not found: 'Counter.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1768530117515 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1768530117515 ""}
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1768530117516 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Fitter" 0 -1 1768530117516 ""}
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1768530117516 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1768530117687 ""}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768530117687 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768530117687 ""}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768530117687 ""}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768530117687 ""}
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1768530117687 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1768530117687 ""}
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1768530117687 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1768530117687 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1768530117688 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1768530117688 ""}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768530117690 ""}
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1768530117691 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1768530117879 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768530117888 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1768530117892 ""}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1768530117982 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768530117982 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1768530118196 ""}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X9_Y0 X18_Y8 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8" { } { { "loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8"} { { 12 { 0 ""} 9 0 10 9 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1768530118280 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1768530118280 ""}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1768530118336 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1768530118336 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768530118336 ""}
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.04 " "Total time spent on timing analysis during the Fitter is 0.04 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1768530118425 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768530118427 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768530118530 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768530118530 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768530118631 ""}
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768530118883 ""}
{ "Warning" "WFIOMGR_FIOMGR_REFER_APPNOTE_447_TOP_LEVEL" "3 MAX 10 " "3 pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing MAX 10 Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." { { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "rst 3.3-V LVTTL J14 " "Pin rst uses I/O standard 3.3-V LVTTL at J14" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { rst } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "rst" } } } } { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 3 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 9 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768530118899 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "func 3.3-V LVTTL J12 " "Pin func uses I/O standard 3.3-V LVTTL at J12" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { func } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "func" } } } } { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 2 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 8 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768530118899 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "clk 3.3-V LVTTL J9 " "Pin clk uses I/O standard 3.3-V LVTTL at J9" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { clk } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "clk" } } } } { "Counter.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp6/Counter.v" 4 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp6/" { { 0 { 0 ""} 0 10 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768530118899 ""} } { } 0 169177 "%1!d! pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing %2!s! Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." 0 0 "Fitter" 0 -1 1768530118899 ""}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "/home/lanshuye/Projects/DCExp/Exp6/output_files/Counter.fit.smsg " "Generated suppressed messages file /home/lanshuye/Projects/DCExp/Exp6/output_files/Counter.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1768530118909 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 7 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 7 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1743 " "Peak virtual memory: 1743 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768530119023 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:21:59 2026 " "Processing ended: Fri Jan 16 10:21:59 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768530119023 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:02 " "Elapsed time: 00:00:02" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768530119023 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:03 " "Total CPU time (on all processors): 00:00:03" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768530119023 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1768530119023 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Fitter" 0 -1 1768530119920 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768530119920 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:21:59 2026 " "Processing started: Fri Jan 16 10:21:59 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768530119920 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1768530119920 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off Counter -c Counter " "Command: quartus_asm --read_settings_files=off --write_settings_files=off Counter -c Counter" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1768530119920 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1768530119992 ""}
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1768530120050 ""}
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1768530120053 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "336 " "Peak virtual memory: 336 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768530120127 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:22:00 2026 " "Processing ended: Fri Jan 16 10:22:00 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768530120127 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768530120127 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768530120127 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1768530120127 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Assembler" 0 -1 1768530120952 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Power Analyzer Quartus Prime " "Running Quartus Prime Power Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768530120952 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:22:00 2026 " "Processing started: Fri Jan 16 10:22:00 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768530120952 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Power Analyzer" 0 -1 1768530120952 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_pow --read_settings_files=off --write_settings_files=off Counter -c Counter " "Command: quartus_pow --read_settings_files=off --write_settings_files=off Counter -c Counter" { } { } 0 0 "Command: %1!s!" 0 0 "Power Analyzer" 0 -1 1768530120952 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Power Analyzer" 0 -1 1768530121024 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768530121027 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768530121027 ""}
{ "Warning" "WTDB_ANALYZE_COMB_LATCHES" "1 " "The Timing Analyzer is analyzing 1 combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." { } { } 0 335093 "The Timing Analyzer is analyzing %1!d! combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." 0 0 "Power Analyzer" 0 -1 1768530121145 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Counter.sdc " "Synopsys Design Constraints File file not found: 'Counter.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Power Analyzer" 0 -1 1768530121146 ""}
{ "Warning" "WSTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT" "clk " "Node: clk was determined to be a clock but was found without an associated clock assignment." { { "Info" "ISTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT_DETAILS" "Register counter\[3\]~_emulated clk " "Register counter\[3\]~_emulated is being clocked by clk" { } { } 0 13166 "%1!s! %2!s! is being clocked by %3!s!" 0 0 "Design Software" 0 -1 1768530121146 ""} } { } 0 332060 "Node: %1!s! was determined to be a clock but was found without an associated clock assignment." 0 0 "Power Analyzer" 0 -1 1768530121146 "|Counter|clk"}
{ "Warning" "WSTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT" "rst " "Node: rst was determined to be a clock but was found without an associated clock assignment." { { "Info" "ISTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT_DETAILS" "Latch counter\[3\]~1 rst " "Latch counter\[3\]~1 is being clocked by rst" { } { } 0 13166 "%1!s! %2!s! is being clocked by %3!s!" 0 0 "Design Software" 0 -1 1768530121146 ""} } { } 0 332060 "Node: %1!s! was determined to be a clock but was found without an associated clock assignment." 0 0 "Power Analyzer" 0 -1 1768530121146 "|Counter|rst"}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Power Analyzer" 0 -1 1768530121147 ""}
{ "Info" "IPVA_PVA_START_CALCULATION" "" "Starting Vectorless Power Activity Estimation" { } { } 0 223000 "Starting Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768530121149 ""}
{ "Warning" "WPUTIL_PUTIL_NO_CLK_DOMAINS_FOUND" "" "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" { } { } 0 222013 "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" 0 0 "Power Analyzer" 0 -1 1768530121149 ""}
{ "Info" "IPVA_PVA_END_CALCULATION" "" "Completed Vectorless Power Activity Estimation" { } { } 0 223001 "Completed Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768530121149 ""}
{ "Info" "IPATFAM_USING_ADVANCED_IO_POWER" "" "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" { } { } 0 218000 "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" 0 0 "Power Analyzer" 0 -1 1768530121269 ""}
{ "Warning" "WPAN_PAN_NO_THERMAL_MODEL_SELECTED" "" "No board thermal model was selected. Analyzing without board thermal modeling." { } { } 0 215044 "No board thermal model was selected. Analyzing without board thermal modeling." 0 0 "Power Analyzer" 0 -1 1768530121270 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Power Analyzer" 0 -1 1768530121289 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Power Analyzer" 0 -1 1768530121398 ""}
{ "Info" "IPAN_AVG_TOGGLE_RATE_PER_DESIGN" "0.000 millions of transitions / sec " "Average toggle rate for this design is 0.000 millions of transitions / sec" { } { } 0 215049 "Average toggle rate for this design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768530121484 ""}
{ "Info" "IPAN_PAN_TOTAL_POWER_ESTIMATION" "113.02 mW " "Total thermal power estimate for the design is 113.02 mW" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "" { Report "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "Compiler" "" "" "" "" { } "PowerPlay Power Analyzer Summary" } } } 0 215031 "Total thermal power estimate for the design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768530121494 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Power Analyzer 0 s 8 s Quartus Prime " "Quartus Prime Power Analyzer was successful. 0 errors, 8 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "872 " "Peak virtual memory: 872 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768530121545 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:22:01 2026 " "Processing ended: Fri Jan 16 10:22:01 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768530121545 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768530121545 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768530121545 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Power Analyzer" 0 -1 1768530121545 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Power Analyzer" 0 -1 1768530122410 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768530122410 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:22:02 2026 " "Processing started: Fri Jan 16 10:22:02 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768530122410 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1768530122410 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta Counter -c Counter " "Command: quartus_sta Counter -c Counter" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1768530122410 ""}
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1768530122426 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1768530122468 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1768530122468 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122486 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122486 ""}
{ "Warning" "WTDB_ANALYZE_COMB_LATCHES" "1 " "The Timing Analyzer is analyzing 1 combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." { } { } 0 335093 "The Timing Analyzer is analyzing %1!d! combinational loops as latches. For more details, run the Check Timing command in the Timing Analyzer or view the \"User-Specified and Inferred Latches\" table in the Analysis & Synthesis report." 0 0 "Timing Analyzer" 0 -1 1768530122524 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Counter.sdc " "Synopsys Design Constraints File file not found: 'Counter.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1768530122526 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122526 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_INFO" "Deriving Clocks " "Deriving Clocks" { { "Info" "ISTA_DERIVE_CLOCKS_INFO" "create_clock -period 1.000 -name clk clk " "create_clock -period 1.000 -name clk clk" { } { } 0 332105 "%1!s!" 0 0 "Design Software" 0 -1 1768530122526 ""} { "Info" "ISTA_DERIVE_CLOCKS_INFO" "create_clock -period 1.000 -name rst rst " "create_clock -period 1.000 -name rst rst" { } { } 0 332105 "%1!s!" 0 0 "Design Software" 0 -1 1768530122526 ""} } { } 0 332105 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768530122526 ""}
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1768530122527 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768530122527 ""}
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1768530122527 ""}
{ "Info" "0" "" "Analyzing Slow 1200mV 100C Model" { } { } 0 0 "Analyzing Slow 1200mV 100C Model" 0 0 "Timing Analyzer" 0 0 1768530122528 ""}
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1768530122529 ""}
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768530122530 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -2.731 " "Worst-case setup slack is -2.731" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122530 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122530 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -2.731 -9.786 clk " " -2.731 -9.786 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122530 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122530 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.942 " "Worst-case hold slack is 0.942" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122530 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122530 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.942 0.000 clk " " 0.942 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122530 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122530 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "recovery -1.550 " "Worst-case recovery slack is -1.550" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122531 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122531 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -1.550 -6.200 clk " " -1.550 -6.200 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122531 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122531 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "removal 1.496 " "Worst-case removal slack is 1.496" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122531 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122531 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 1.496 0.000 clk " " 1.496 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122531 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122531 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122531 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122531 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -8.612 clk " " -3.000 -8.612 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122531 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -3.000 rst " " -3.000 -3.000 rst " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122531 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122531 ""}
{ "Info" "0" "" "Analyzing Slow 1200mV -40C Model" { } { } 0 0 "Analyzing Slow 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768530122535 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1768530122543 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1768530122655 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768530122665 ""}
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768530122666 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -2.268 " "Worst-case setup slack is -2.268" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122666 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122666 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -2.268 -8.261 clk " " -2.268 -8.261 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122666 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122666 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.748 " "Worst-case hold slack is 0.748" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122667 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122667 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.748 0.000 clk " " 0.748 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122667 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122667 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "recovery -1.185 " "Worst-case recovery slack is -1.185" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122667 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122667 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -1.185 -4.740 clk " " -1.185 -4.740 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122667 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122667 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "removal 1.362 " "Worst-case removal slack is 1.362" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122667 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122667 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 1.362 0.000 clk " " 1.362 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122667 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122667 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122668 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122668 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -8.612 clk " " -3.000 -8.612 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122668 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -3.000 rst " " -3.000 -3.000 rst " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122668 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122668 ""}
{ "Info" "0" "" "Analyzing Fast 1200mV -40C Model" { } { } 0 0 "Analyzing Fast 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768530122671 ""}
{ "Info" "ISTA_DERIVE_CLOCK_UNCERTAINTY_INFO" "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties. " "Deriving Clock Uncertainty. Please refer to report_sdc in the Timing Analyzer to see clock uncertainties." { } { } 0 332123 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768530122715 ""}
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768530122715 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "setup -1.058 " "Worst-case setup slack is -1.058" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122716 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122716 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -1.058 -3.946 clk " " -1.058 -3.946 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122716 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122716 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.314 " "Worst-case hold slack is 0.314" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122716 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122716 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.314 0.000 clk " " 0.314 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122716 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122716 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "recovery -0.926 " "Worst-case recovery slack is -0.926" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122717 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122717 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -0.926 -3.704 clk " " -0.926 -3.704 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122717 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122717 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "removal 0.614 " "Worst-case removal slack is 0.614" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122717 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122717 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.614 0.000 clk " " 0.614 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122717 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122717 ""}
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122717 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122717 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -7.788 clk " " -3.000 -7.788 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122717 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -3.000 rst " " -3.000 -3.000 rst " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768530122717 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768530122717 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768530123094 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768530123094 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "596 " "Peak virtual memory: 596 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768530123101 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:22:03 2026 " "Processing ended: Fri Jan 16 10:22:03 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768530123101 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768530123101 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768530123101 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1768530123101 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Timing Analyzer" 0 -1 1768530124022 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768530124022 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:22:03 2026 " "Processing started: Fri Jan 16 10:22:03 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768530124022 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768530124022 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off Counter -c Counter " "Command: quartus_eda --read_settings_files=off --write_settings_files=off Counter -c Counter" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768530124023 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1768530124110 ""}
{ "Info" "IWSC_DONE_HDL_GENERATION" "Counter.vo /home/lanshuye/Projects/DCExp/Exp6/simulation/questa/ simulation " "Generated file Counter.vo in folder \"/home/lanshuye/Projects/DCExp/Exp6/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1768530124134 ""}
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "586 " "Peak virtual memory: 586 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768530124140 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:22:04 2026 " "Processing ended: Fri Jan 16 10:22:04 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768530124140 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768530124140 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768530124140 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768530124140 ""}
{ "Info" "IFLOW_ERROR_COUNT" "Full Compilation 0 s 30 s " "Quartus Prime Full Compilation was successful. 0 errors, 30 warnings" { } { } 0 293000 "Quartus Prime %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768530124726 ""}