DONE
这个提交包含在:
二进制
Exp5Register/db/.cmp.kpt
普通文件
二进制
Exp5Register/db/.cmp.kpt
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.(0).cnf.cdb
普通文件
二进制
Exp5Register/db/Register.(0).cnf.cdb
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.(0).cnf.hdb
普通文件
二进制
Exp5Register/db/Register.(0).cnf.hdb
普通文件
二进制文件未显示。
@ -0,0 +1,7 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768532243125 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768532243125 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:57:23 2026 " "Processing started: Fri Jan 16 10:57:23 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768532243125 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1768532243125 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off Register -c Register " "Command: quartus_asm --read_settings_files=off --write_settings_files=off Register -c Register" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1768532243125 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1768532243195 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1768532243256 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1768532243259 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "336 " "Peak virtual memory: 336 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768532243332 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:57:23 2026 " "Processing ended: Fri Jan 16 10:57:23 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768532243332 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768532243332 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768532243332 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1768532243332 ""}
|
||||
二进制
Exp5Register/db/Register.asm.rdb
普通文件
二进制
Exp5Register/db/Register.asm.rdb
普通文件
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1,5 @@
|
||||
<?xml version="1.0" ?>
|
||||
<LOG_ROOT>
|
||||
<PROJECT NAME="Register">
|
||||
</PROJECT>
|
||||
</LOG_ROOT>
|
||||
二进制
Exp5Register/db/Register.cmp.bpm
普通文件
二进制
Exp5Register/db/Register.cmp.bpm
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.cmp.cdb
普通文件
二进制
Exp5Register/db/Register.cmp.cdb
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.cmp.hdb
普通文件
二进制
Exp5Register/db/Register.cmp.hdb
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.cmp.idb
普通文件
二进制
Exp5Register/db/Register.cmp.idb
普通文件
二进制文件未显示。
@ -0,0 +1,52 @@
|
||||
v1
|
||||
IO_RULES,NUM_CLKS_NOT_EXCEED_CLKS_AVAILABLE,INAPPLICABLE,IO_000002,Capacity Checks,Number of clocks in an I/O bank should not exceed the number of clocks available.,Critical,No Global Signal assignments found.,,I/O,,
|
||||
IO_RULES,NUM_PINS_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000001,Capacity Checks,Number of pins in an I/O bank should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,NUM_VREF_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000003,Capacity Checks,Number of pins in a Vrefgroup should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,IO_BANK_SUPPORT_VCCIO,INAPPLICABLE,IO_000004,Voltage Compatibility Checks,The I/O bank should support the requested VCCIO.,Critical,No IOBANK_VCCIO assignments found.,,I/O,,
|
||||
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VREF,INAPPLICABLE,IO_000005,Voltage Compatibility Checks,The I/O bank should not have competing VREF values.,Critical,No VREF I/O Standard assignments found.,,I/O,,
|
||||
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VCCIO,PASS,IO_000006,Voltage Compatibility Checks,The I/O bank should not have competing VCCIO values.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,CHECK_UNAVAILABLE_LOC,PASS,IO_000007,Valid Location Checks,Checks for unavailable locations.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,CHECK_RESERVED_LOC,INAPPLICABLE,IO_000008,Valid Location Checks,Checks for reserved locations.,Critical,No reserved LogicLock region found.,,I/O,,
|
||||
IO_RULES,OCT_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000047,I/O Properties Checks for One I/O,On Chip Termination and Slew Rate should not be used at the same time.,Critical,No Slew Rate assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000046,I/O Properties Checks for One I/O,The location should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000045,I/O Properties Checks for One I/O,The I/O standard should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
|
||||
IO_RULES,WEAK_PULL_UP_AND_BUS_HOLD_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000027,I/O Properties Checks for One I/O,Weak Pull Up and Bus Hold should not be used at the same time.,Critical,No Enable Bus-Hold Circuitry or Weak Pull-Up Resistor assignments found.,,I/O,,
|
||||
IO_RULES,OCT_AND_CURRENT_STRENGTH_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000026,I/O Properties Checks for One I/O,On Chip Termination and Current Strength should not be used at the same time.,Critical,No Current Strength or Termination assignments found.,,I/O,,
|
||||
IO_RULES,IO_DIR_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000024,I/O Properties Checks for One I/O,The I/O direction should support the On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_OPEN_DRAIN_VALUE,INAPPLICABLE,IO_000023,I/O Properties Checks for One I/O,The I/O standard should support the Open Drain value.,Critical,No open drain assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000022,I/O Properties Checks for One I/O,The I/O standard should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000021,I/O Properties Checks for One I/O,The I/O standard should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_PCI_CLAMP_DIODE,PASS,IO_000020,I/O Properties Checks for One I/O,The I/O standard should support the requested PCI Clamp Diode.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000019,I/O Properties Checks for One I/O,The I/O standard should support the requested On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000018,I/O Properties Checks for One I/O,The I/O standard should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_PCI_CLAMP_DIODE,PASS,IO_000015,I/O Properties Checks for One I/O,The location should support the requested PCI Clamp Diode.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000014,I/O Properties Checks for One I/O,The location should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000013,I/O Properties Checks for One I/O,The location should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000012,I/O Properties Checks for One I/O,The location should support the requested On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000011,I/O Properties Checks for One I/O,The location should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_IO_DIR,PASS,IO_000010,I/O Properties Checks for One I/O,The location should support the requested I/O direction.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_IO_STD,PASS,IO_000009,I/O Properties Checks for One I/O,The location should support the requested I/O standard.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,CURRENT_DENSITY_FOR_CONSECUTIVE_IO_NOT_EXCEED_CURRENT_VALUE,PASS,IO_000033,Electromigration Checks,Current density for consecutive I/Os should not exceed 160mA for row I/Os and 160mA for column I/Os.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,SINGLE_ENDED_OUTPUTS_LAB_ROWS_FROM_DIFF_IO,INAPPLICABLE,IO_000034,SI Related Distance Checks,Single-ended outputs should be 5 LAB row(s) away from a differential I/O.,High,No Differential I/O Standard assignments found.,,I/O,,
|
||||
IO_RULES,MAX_20_OUTPUTS_ALLOWED_IN_VREFGROUP,INAPPLICABLE,IO_000042,SI Related SSO Limit Checks,No more than 20 outputs are allowed in a VREF group when VREF is being read from.,High,No VREF I/O Standard assignments found.,,I/O,,
|
||||
IO_RULES_MATRIX,Pin/Rules,IO_000002;IO_000001;IO_000003;IO_000004;IO_000005;IO_000006;IO_000007;IO_000008;IO_000047;IO_000046;IO_000045;IO_000027;IO_000026;IO_000024;IO_000023;IO_000022;IO_000021;IO_000020;IO_000019;IO_000018;IO_000015;IO_000014;IO_000013;IO_000012;IO_000011;IO_000010;IO_000009;IO_000033;IO_000034;IO_000042,
|
||||
IO_RULES_MATRIX,Total Pass,0;11;11;0;0;11;11;0;0;0;0;0;0;0;0;0;0;3;0;0;3;0;0;0;0;11;11;11;0;0,
|
||||
IO_RULES_MATRIX,Total Unchecked,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
|
||||
IO_RULES_MATRIX,Total Inapplicable,11;0;0;11;11;0;0;11;11;11;11;11;11;11;11;11;11;8;11;11;8;11;11;11;11;0;0;0;11;11,
|
||||
IO_RULES_MATRIX,Total Fail,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
|
||||
IO_RULES_MATRIX,data[0],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data[1],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data[2],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data[3],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data[4],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data[5],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data[6],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data[7],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,clk,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,rst,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,loop,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_SUMMARY,Total I/O Rules,30,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Passed,9,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Failed,0,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Unchecked,0,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Inapplicable,21,
|
||||
二进制
Exp5Register/db/Register.cmp.rdb
普通文件
二进制
Exp5Register/db/Register.cmp.rdb
普通文件
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1,3 @@
|
||||
Quartus_Version = Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Version_Index = 604268800
|
||||
Creation_Time = Fri Jan 16 11:04:26 2026
|
||||
@ -0,0 +1,6 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768532247318 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768532247318 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:57:27 2026 " "Processing started: Fri Jan 16 10:57:27 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768532247318 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768532247318 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off Register -c Register " "Command: quartus_eda --read_settings_files=off --write_settings_files=off Register -c Register" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768532247318 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1768532247404 ""}
|
||||
{ "Info" "IWSC_DONE_HDL_GENERATION" "Register.vo /home/lanshuye/Projects/DCExp/Exp5Register/simulation/questa/ simulation " "Generated file Register.vo in folder \"/home/lanshuye/Projects/DCExp/Exp5Register/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1768532247427 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "583 " "Peak virtual memory: 583 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768532247433 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:57:27 2026 " "Processing ended: Fri Jan 16 10:57:27 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768532247433 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768532247433 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768532247433 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768532247433 ""}
|
||||
@ -0,0 +1,51 @@
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1768532240578 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1768532240578 ""}
|
||||
{ "Info" "IMPP_MPP_USER_DEVICE" "Register 10M02SCM153I7G " "Selected device 10M02SCM153I7G for design \"Register\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1768532240581 ""}
|
||||
{ "Info" "IMPP_MPP_BOOT_SEL_PIN_NOT_RESERVED" "" "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." { } { } 0 22896 "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." 0 0 "Fitter" 0 -1 1768532240595 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768532240596 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768532240596 ""}
|
||||
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1768532240629 ""}
|
||||
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1768532240631 ""}
|
||||
{ "Critical Warning" "WFCUDA_FCUDA_SPS_DEVICE_POWER_LIMITATION" "" "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." { } { } 1 16562 "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." 0 0 "Fitter" 0 -1 1768532240647 ""}
|
||||
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M08SCM153I7G " "Device 10M08SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768532240647 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M04SCM153I7G " "Device 10M04SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768532240647 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1768532240647 ""}
|
||||
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "7 " "Fitter converted 7 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TMS~ G1 " "Pin ~ALTERA_TMS~ is reserved at location G1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TMS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 48 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532240649 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TCK~ J1 " "Pin ~ALTERA_TCK~ is reserved at location J1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TCK~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 50 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532240649 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDI~ H5 " "Pin ~ALTERA_TDI~ is reserved at location H5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDI~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 52 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532240649 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDO~ H4 " "Pin ~ALTERA_TDO~ is reserved at location H4" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDO~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 54 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532240649 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCONFIG~ E8 " "Pin ~ALTERA_nCONFIG~ is reserved at location E8" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nCONFIG~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 56 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532240649 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nSTATUS~ D6 " "Pin ~ALTERA_nSTATUS~ is reserved at location D6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nSTATUS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 58 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532240649 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONF_DONE~ E6 " "Pin ~ALTERA_CONF_DONE~ is reserved at location E6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_CONF_DONE~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 60 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532240649 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1768532240649 ""}
|
||||
{ "Info" "IFIOMGR_RESERVE_PIN_NO_DATA0" "" "DATA\[0\] dual-purpose pin not reserved" { } { } 0 169141 "DATA\[0\] dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768532240649 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "Data\[1\]/ASDO " "Data\[1\]/ASDO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768532240649 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "nCSO " "nCSO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768532240649 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "DCLK " "DCLK dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768532240649 ""}
|
||||
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1768532240649 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Register.sdc " "Synopsys Design Constraints File file not found: 'Register.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1768532240855 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1768532240855 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1768532240856 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1768532240856 ""}
|
||||
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1768532240856 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1768532241028 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768532241028 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768532241028 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768532241028 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768532241028 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1768532241029 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1768532241029 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1768532241029 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1768532241033 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1768532241033 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1768532241033 ""}
|
||||
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:01 " "Fitter preparation operations ending: elapsed time is 00:00:01" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768532241036 ""}
|
||||
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1768532241038 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1768532241226 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768532241236 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1768532241240 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1768532241342 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768532241342 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1768532241557 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X9_Y0 X18_Y8 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8" { } { { "loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8"} { { 12 { 0 ""} 9 0 10 9 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1768532241634 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1768532241634 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1768532241645 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1768532241645 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768532241646 ""}
|
||||
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.04 " "Total time spent on timing analysis during the Fitter is 0.04 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1768532241733 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768532241735 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768532241837 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768532241837 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768532241936 ""}
|
||||
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:01 " "Fitter post-fit operations ending: elapsed time is 00:00:01" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768532242090 ""}
|
||||
{ "Warning" "WFIOMGR_FIOMGR_REFER_APPNOTE_447_TOP_LEVEL" "3 MAX 10 " "3 pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing MAX 10 Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." { { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "clk 3.3-V LVTTL J9 " "Pin clk uses I/O standard 3.3-V LVTTL at J9" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { clk } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "clk" } } } } { "Register.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp5Register/Register.v" 2 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 12 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768532242107 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "rst 3.3-V LVTTL J14 " "Pin rst uses I/O standard 3.3-V LVTTL at J14" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { rst } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "rst" } } } } { "Register.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp5Register/Register.v" 3 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 13 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768532242107 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "loop 3.3-V LVTTL J12 " "Pin loop uses I/O standard 3.3-V LVTTL at J12" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { loop } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "loop" } } } } { "Register.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp5Register/Register.v" 4 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 14 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768532242107 ""} } { } 0 169177 "%1!d! pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing %2!s! Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." 0 0 "Fitter" 0 -1 1768532242107 ""}
|
||||
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "/home/lanshuye/Projects/DCExp/Exp5Register/output_files/Register.fit.smsg " "Generated suppressed messages file /home/lanshuye/Projects/DCExp/Exp5Register/output_files/Register.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1768532242117 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1758 " "Peak virtual memory: 1758 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768532242230 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:57:22 2026 " "Processing ended: Fri Jan 16 10:57:22 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768532242230 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:02 " "Elapsed time: 00:00:02" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768532242230 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:02 " "Total CPU time (on all processors): 00:00:02" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768532242230 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1768532242230 ""}
|
||||
@ -0,0 +1,30 @@
|
||||
|Register
|
||||
clk => temp.CLK
|
||||
clk => data[0]~reg0.CLK
|
||||
clk => data[1]~reg0.CLK
|
||||
clk => data[2]~reg0.CLK
|
||||
clk => data[3]~reg0.CLK
|
||||
clk => data[4]~reg0.CLK
|
||||
clk => data[5]~reg0.CLK
|
||||
clk => data[6]~reg0.CLK
|
||||
clk => data[7]~reg0.CLK
|
||||
rst => temp.ACLR
|
||||
rst => data[0]~reg0.ALOAD
|
||||
rst => data[1]~reg0.ALOAD
|
||||
rst => data[2]~reg0.ALOAD
|
||||
rst => data[3]~reg0.ALOAD
|
||||
rst => data[4]~reg0.ALOAD
|
||||
rst => data[5]~reg0.ALOAD
|
||||
rst => data[6]~reg0.ALOAD
|
||||
rst => data[7]~reg0.ALOAD
|
||||
loop => temp.OUTPUTSELECT
|
||||
data[0] <= data[0]~reg0.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data[1] <= data[1]~reg0.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data[2] <= data[2]~reg0.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data[3] <= data[3]~reg0.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data[4] <= data[4]~reg0.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data[5] <= data[5]~reg0.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data[6] <= data[6]~reg0.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data[7] <= data[7]~reg0.DB_MAX_OUTPUT_PORT_TYPE
|
||||
|
||||
|
||||
二进制
Exp5Register/db/Register.hif
普通文件
二进制
Exp5Register/db/Register.hif
普通文件
二进制文件未显示。
@ -0,0 +1,18 @@
|
||||
<TABLE>
|
||||
<TR bgcolor="#C0C0C0">
|
||||
<TH>Hierarchy</TH>
|
||||
<TH>Input</TH>
|
||||
<TH>Constant Input</TH>
|
||||
<TH>Unused Input</TH>
|
||||
<TH>Floating Input</TH>
|
||||
<TH>Output</TH>
|
||||
<TH>Constant Output</TH>
|
||||
<TH>Unused Output</TH>
|
||||
<TH>Floating Output</TH>
|
||||
<TH>Bidir</TH>
|
||||
<TH>Constant Bidir</TH>
|
||||
<TH>Unused Bidir</TH>
|
||||
<TH>Input only Bidir</TH>
|
||||
<TH>Output only Bidir</TH>
|
||||
</TR>
|
||||
</TABLE>
|
||||
二进制
Exp5Register/db/Register.lpc.rdb
普通文件
二进制
Exp5Register/db/Register.lpc.rdb
普通文件
二进制文件未显示。
@ -0,0 +1,5 @@
|
||||
+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
|
||||
; Legal Partition Candidates ;
|
||||
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+
|
||||
; Hierarchy ; Input ; Constant Input ; Unused Input ; Floating Input ; Output ; Constant Output ; Unused Output ; Floating Output ; Bidir ; Constant Bidir ; Unused Bidir ; Input only Bidir ; Output only Bidir ;
|
||||
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+
|
||||
二进制
Exp5Register/db/Register.map.ammdb
普通文件
二进制
Exp5Register/db/Register.map.ammdb
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.map.bpm
普通文件
二进制
Exp5Register/db/Register.map.bpm
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.map.cdb
普通文件
二进制
Exp5Register/db/Register.map.cdb
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.map.hdb
普通文件
二进制
Exp5Register/db/Register.map.hdb
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.map.kpt
普通文件
二进制
Exp5Register/db/Register.map.kpt
普通文件
二进制文件未显示。
@ -0,0 +1 @@
|
||||
v1
|
||||
@ -0,0 +1,13 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768532235659 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768532235659 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:57:15 2026 " "Processing started: Fri Jan 16 10:57:15 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768532235659 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768532235659 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off Register -c Register " "Command: quartus_map --read_settings_files=on --write_settings_files=off Register -c Register" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768532235660 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1768532235738 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1768532235738 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Register.v 1 1 " "Found 1 design units, including 1 entities, in source file Register.v" { { "Info" "ISGN_ENTITY_NAME" "1 Register " "Found entity 1: Register" { } { { "Register.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp5Register/Register.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768532239361 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768532239361 ""}
|
||||
{ "Info" "ISGN_START_ELABORATION_TOP" "Register " "Elaborating entity \"Register\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1768532239380 ""}
|
||||
{ "Info" "IMLS_MLS_PRESET_POWER_UP" "" "Registers with preset signals will power-up high" { } { { "Register.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp5Register/Register.v" 16 -1 0 } } } 0 13000 "Registers with preset signals will power-up high" 0 0 "Analysis & Synthesis" 0 -1 1768532239491 ""}
|
||||
{ "Info" "IMLS_MLS_DEV_CLRN_SETS_REGISTERS" "" "DEV_CLRn pin will set, and not reset, register with preset signal due to NOT Gate Push-Back" { } { } 0 13003 "DEV_CLRn pin will set, and not reset, register with preset signal due to NOT Gate Push-Back" 0 0 "Analysis & Synthesis" 0 -1 1768532239491 ""}
|
||||
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1768532239514 ""}
|
||||
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1768532239643 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768532239643 ""}
|
||||
{ "Info" "ICUT_CUT_TM_SUMMARY" "20 " "Implemented 20 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "3 " "Implemented 3 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1768532239653 ""} { "Info" "ICUT_CUT_TM_OPINS" "8 " "Implemented 8 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1768532239653 ""} { "Info" "ICUT_CUT_TM_LCELLS" "9 " "Implemented 9 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1768532239653 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1768532239653 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "496 " "Peak virtual memory: 496 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768532239656 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:57:19 2026 " "Processing ended: Fri Jan 16 10:57:19 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768532239656 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768532239656 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:14 " "Total CPU time (on all processors): 00:00:14" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768532239656 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768532239656 ""}
|
||||
二进制
Exp5Register/db/Register.map.rdb
普通文件
二进制
Exp5Register/db/Register.map.rdb
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.map_bb.cdb
普通文件
二进制
Exp5Register/db/Register.map_bb.cdb
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.map_bb.hdb
普通文件
二进制
Exp5Register/db/Register.map_bb.hdb
普通文件
二进制文件未显示。
@ -0,0 +1 @@
|
||||
v1
|
||||
@ -0,0 +1,19 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768532244188 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Power Analyzer Quartus Prime " "Running Quartus Prime Power Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768532244188 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:57:24 2026 " "Processing started: Fri Jan 16 10:57:24 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768532244188 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Power Analyzer" 0 -1 1768532244188 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_pow --read_settings_files=off --write_settings_files=off Register -c Register " "Command: quartus_pow --read_settings_files=off --write_settings_files=off Register -c Register" { } { } 0 0 "Command: %1!s!" 0 0 "Power Analyzer" 0 -1 1768532244189 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Power Analyzer" 0 -1 1768532244263 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768532244265 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768532244265 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Register.sdc " "Synopsys Design Constraints File file not found: 'Register.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Power Analyzer" 0 -1 1768532244386 ""}
|
||||
{ "Warning" "WSTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT" "clk " "Node: clk was determined to be a clock but was found without an associated clock assignment." { { "Info" "ISTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT_DETAILS" "Register data\[0\]~reg0 clk " "Register data\[0\]~reg0 is being clocked by clk" { } { } 0 13166 "%1!s! %2!s! is being clocked by %3!s!" 0 0 "Design Software" 0 -1 1768532244386 ""} } { } 0 332060 "Node: %1!s! was determined to be a clock but was found without an associated clock assignment." 0 0 "Power Analyzer" 0 -1 1768532244386 "|Register|clk"}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Power Analyzer" 0 -1 1768532244386 ""}
|
||||
{ "Info" "IPVA_PVA_START_CALCULATION" "" "Starting Vectorless Power Activity Estimation" { } { } 0 223000 "Starting Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768532244389 ""}
|
||||
{ "Warning" "WPUTIL_PUTIL_NO_CLK_DOMAINS_FOUND" "" "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" { } { } 0 222013 "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" 0 0 "Power Analyzer" 0 -1 1768532244389 ""}
|
||||
{ "Info" "IPVA_PVA_END_CALCULATION" "" "Completed Vectorless Power Activity Estimation" { } { } 0 223001 "Completed Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768532244390 ""}
|
||||
{ "Info" "IPATFAM_USING_ADVANCED_IO_POWER" "" "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" { } { } 0 218000 "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" 0 0 "Power Analyzer" 0 -1 1768532244510 ""}
|
||||
{ "Warning" "WPAN_PAN_NO_THERMAL_MODEL_SELECTED" "" "No board thermal model was selected. Analyzing without board thermal modeling." { } { } 0 215044 "No board thermal model was selected. Analyzing without board thermal modeling." 0 0 "Power Analyzer" 0 -1 1768532244511 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Power Analyzer" 0 -1 1768532244530 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Power Analyzer" 0 -1 1768532244640 ""}
|
||||
{ "Info" "IPAN_AVG_TOGGLE_RATE_PER_DESIGN" "0.000 millions of transitions / sec " "Average toggle rate for this design is 0.000 millions of transitions / sec" { } { } 0 215049 "Average toggle rate for this design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768532244733 ""}
|
||||
{ "Info" "IPAN_PAN_TOTAL_POWER_ESTIMATION" "113.20 mW " "Total thermal power estimate for the design is 113.20 mW" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "" { Report "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "Compiler" "" "" "" "" { } "PowerPlay Power Analyzer Summary" } } } 0 215031 "Total thermal power estimate for the design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768532244743 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Power Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Power Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "905 " "Peak virtual memory: 905 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768532244793 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:57:24 2026 " "Processing ended: Fri Jan 16 10:57:24 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768532244793 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768532244793 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768532244793 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Power Analyzer" 0 -1 1768532244793 ""}
|
||||
二进制
Exp5Register/db/Register.pplq.rdb
普通文件
二进制
Exp5Register/db/Register.pplq.rdb
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.pre_map.hdb
普通文件
二进制
Exp5Register/db/Register.pre_map.hdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制
Exp5Register/db/Register.routing.rdb
普通文件
二进制
Exp5Register/db/Register.routing.rdb
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.rtlv.hdb
普通文件
二进制
Exp5Register/db/Register.rtlv.hdb
普通文件
二进制文件未显示。
二进制
Exp5Register/db/Register.rtlv_sg.cdb
普通文件
二进制
Exp5Register/db/Register.rtlv_sg.cdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1 @@
|
||||
DONE
|
||||
@ -0,0 +1,46 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768532245716 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768532245716 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:57:25 2026 " "Processing started: Fri Jan 16 10:57:25 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768532245716 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1768532245716 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta Register -c Register " "Command: quartus_sta Register -c Register" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1768532245716 ""}
|
||||
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1768532245732 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1768532245775 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1768532245775 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532245790 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532245790 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Register.sdc " "Synopsys Design Constraints File file not found: 'Register.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1768532245830 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532245830 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_INFO" "Deriving Clocks " "Deriving Clocks" { { "Info" "ISTA_DERIVE_CLOCKS_INFO" "create_clock -period 1.000 -name clk clk " "create_clock -period 1.000 -name clk clk" { } { } 0 332105 "%1!s!" 0 0 "Design Software" 0 -1 1768532245831 ""} } { } 0 332105 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768532245831 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1768532245831 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768532245831 ""}
|
||||
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1768532245831 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV 100C Model" { } { } 0 0 "Analyzing Slow 1200mV 100C Model" 0 0 "Timing Analyzer" 0 0 1768532245833 ""}
|
||||
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1768532245834 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "setup 0.169 " "Worst-case setup slack is 0.169" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245834 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245834 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.169 0.000 clk " " 0.169 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245834 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532245834 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.449 " "Worst-case hold slack is 0.449" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245835 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245835 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.449 0.000 clk " " 0.449 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245835 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532245835 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768532245835 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768532245835 ""}
|
||||
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768532245835 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245836 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245836 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -15.627 clk " " -3.000 -15.627 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245836 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532245836 ""}
|
||||
{ "Info" "ISTA_REPORT_METASTABILITY_INFO" "Report Metastability: Found 1 synchronizer chains. " "Report Metastability: Found 1 synchronizer chains." { { "Info" "ISTA_REPORT_METASTABILITY_INFO" "The design MTBF is not calculated because there are no specified synchronizers in the design. " "The design MTBF is not calculated because there are no specified synchronizers in the design." { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532245838 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Number of Synchronizer Chains Found: 1 " "Number of Synchronizer Chains Found: 1" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532245838 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Shortest Synchronizer Chain: 2 Registers " "Shortest Synchronizer Chain: 2 Registers" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532245838 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Fraction of Chains for which MTBFs Could Not be Calculated: 1.000 " "Fraction of Chains for which MTBFs Could Not be Calculated: 1.000" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532245838 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Worst Case Available Settling Time: 0.387 ns " "Worst Case Available Settling Time: 0.387 ns" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532245838 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" " " "" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532245838 ""} } { } 0 332114 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768532245838 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV -40C Model" { } { } 0 0 "Analyzing Slow 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768532245839 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1768532245847 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1768532245957 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768532245967 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "setup 0.272 " "Worst-case setup slack is 0.272" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245967 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245967 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.272 0.000 clk " " 0.272 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245967 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532245967 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.409 " "Worst-case hold slack is 0.409" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245968 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245968 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.409 0.000 clk " " 0.409 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245968 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532245968 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768532245968 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768532245968 ""}
|
||||
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768532245968 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245969 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245969 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -15.627 clk " " -3.000 -15.627 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532245969 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532245969 ""}
|
||||
{ "Info" "ISTA_REPORT_METASTABILITY_INFO" "Report Metastability: Found 1 synchronizer chains. " "Report Metastability: Found 1 synchronizer chains." { { "Info" "ISTA_REPORT_METASTABILITY_INFO" "The design MTBF is not calculated because there are no specified synchronizers in the design. " "The design MTBF is not calculated because there are no specified synchronizers in the design." { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532245971 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Number of Synchronizer Chains Found: 1 " "Number of Synchronizer Chains Found: 1" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532245971 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Shortest Synchronizer Chain: 2 Registers " "Shortest Synchronizer Chain: 2 Registers" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532245971 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Fraction of Chains for which MTBFs Could Not be Calculated: 1.000 " "Fraction of Chains for which MTBFs Could Not be Calculated: 1.000" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532245971 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Worst Case Available Settling Time: 0.594 ns " "Worst Case Available Settling Time: 0.594 ns" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532245971 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" " " "" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532245971 ""} } { } 0 332114 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768532245971 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1200mV -40C Model" { } { } 0 0 "Analyzing Fast 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768532245972 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768532246016 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "setup 0.675 " "Worst-case setup slack is 0.675" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532246017 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532246017 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.675 0.000 clk " " 0.675 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532246017 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532246017 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.165 " "Worst-case hold slack is 0.165" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532246018 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532246018 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.165 0.000 clk " " 0.165 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532246018 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532246018 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768532246018 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768532246018 ""}
|
||||
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768532246018 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532246019 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532246019 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -13.962 clk " " -3.000 -13.962 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532246019 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532246019 ""}
|
||||
{ "Info" "ISTA_REPORT_METASTABILITY_INFO" "Report Metastability: Found 1 synchronizer chains. " "Report Metastability: Found 1 synchronizer chains." { { "Info" "ISTA_REPORT_METASTABILITY_INFO" "The design MTBF is not calculated because there are no specified synchronizers in the design. " "The design MTBF is not calculated because there are no specified synchronizers in the design." { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532246021 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Number of Synchronizer Chains Found: 1 " "Number of Synchronizer Chains Found: 1" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532246021 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Shortest Synchronizer Chain: 2 Registers " "Shortest Synchronizer Chain: 2 Registers" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532246021 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Fraction of Chains for which MTBFs Could Not be Calculated: 1.000 " "Fraction of Chains for which MTBFs Could Not be Calculated: 1.000" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532246021 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Worst Case Available Settling Time: 1.363 ns " "Worst Case Available Settling Time: 1.363 ns" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532246021 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" " " "" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532246021 ""} } { } 0 332114 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768532246021 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768532246395 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768532246395 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "568 " "Peak virtual memory: 568 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768532246403 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:57:26 2026 " "Processing ended: Fri Jan 16 10:57:26 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768532246403 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768532246403 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768532246403 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1768532246403 ""}
|
||||
二进制
Exp5Register/db/Register.sta.rdb
普通文件
二进制
Exp5Register/db/Register.sta.rdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1,4 @@
|
||||
start_full_compilation:s
|
||||
start_assembler:s-start_full_compilation
|
||||
start_timing_analyzer:s-start_full_compilation
|
||||
start_eda_netlist_writer:s-start_full_compilation
|
||||
二进制
Exp5Register/db/Register.vpr.ammdb
普通文件
二进制
Exp5Register/db/Register.vpr.ammdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1,53 @@
|
||||
{
|
||||
"partitions" : [
|
||||
{
|
||||
"name" : "Top",
|
||||
"pins" : [
|
||||
{
|
||||
"name" : "data[0]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data[1]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data[2]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data[3]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data[4]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data[5]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data[6]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data[7]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "clk",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "rst",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "loop",
|
||||
"strict" : false
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
}
|
||||
@ -0,0 +1,149 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768532103259 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768532103259 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:55:03 2026 " "Processing started: Fri Jan 16 10:55:03 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768532103259 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768532103259 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off Register -c Register " "Command: quartus_map --read_settings_files=on --write_settings_files=off Register -c Register" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768532103259 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1768532103340 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1768532103340 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Register.v 1 1 " "Found 1 design units, including 1 entities, in source file Register.v" { { "Info" "ISGN_ENTITY_NAME" "1 Register " "Found entity 1: Register" { } { { "Register.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp5Register/Register.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768532106929 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768532106929 ""}
|
||||
{ "Info" "ISGN_START_ELABORATION_TOP" "Register " "Elaborating entity \"Register\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1768532106949 ""}
|
||||
{ "Info" "IMLS_MLS_PRESET_POWER_UP" "" "Registers with preset signals will power-up high" { } { { "Register.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp5Register/Register.v" 17 -1 0 } } } 0 13000 "Registers with preset signals will power-up high" 0 0 "Analysis & Synthesis" 0 -1 1768532107062 ""}
|
||||
{ "Info" "IMLS_MLS_DEV_CLRN_SETS_REGISTERS" "" "DEV_CLRn pin will set, and not reset, register with preset signal due to NOT Gate Push-Back" { } { } 0 13003 "DEV_CLRn pin will set, and not reset, register with preset signal due to NOT Gate Push-Back" 0 0 "Analysis & Synthesis" 0 -1 1768532107062 ""}
|
||||
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1768532107085 ""}
|
||||
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1768532107215 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768532107215 ""}
|
||||
{ "Info" "ICUT_CUT_TM_SUMMARY" "20 " "Implemented 20 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "3 " "Implemented 3 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1768532107226 ""} { "Info" "ICUT_CUT_TM_OPINS" "8 " "Implemented 8 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1768532107226 ""} { "Info" "ICUT_CUT_TM_LCELLS" "9 " "Implemented 9 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1768532107226 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1768532107226 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "461 " "Peak virtual memory: 461 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768532107229 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:55:07 2026 " "Processing ended: Fri Jan 16 10:55:07 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768532107229 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768532107229 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:13 " "Total CPU time (on all processors): 00:00:13" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768532107229 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768532107229 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Analysis & Synthesis" 0 -1 1768532108128 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus Prime " "Running Quartus Prime Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768532108128 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:55:07 2026 " "Processing started: Fri Jan 16 10:55:07 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768532108128 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Fitter" 0 -1 1768532108128 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off Register -c Register " "Command: quartus_fit --read_settings_files=off --write_settings_files=off Register -c Register" { } { } 0 0 "Command: %1!s!" 0 0 "Fitter" 0 -1 1768532108128 ""}
|
||||
{ "Info" "0" "" "qfit2_default_script.tcl version: #1" { } { } 0 0 "qfit2_default_script.tcl version: #1" 0 0 "Fitter" 0 0 1768532108143 ""}
|
||||
{ "Info" "0" "" "Project = Register" { } { } 0 0 "Project = Register" 0 0 "Fitter" 0 0 1768532108143 ""}
|
||||
{ "Info" "0" "" "Revision = Register" { } { } 0 0 "Revision = Register" 0 0 "Fitter" 0 0 1768532108143 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1768532108179 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1768532108179 ""}
|
||||
{ "Info" "IMPP_MPP_USER_DEVICE" "Register 10M02SCM153I7G " "Selected device 10M02SCM153I7G for design \"Register\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1768532108182 ""}
|
||||
{ "Info" "IMPP_MPP_BOOT_SEL_PIN_NOT_RESERVED" "" "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." { } { } 0 22896 "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." 0 0 "Fitter" 0 -1 1768532108194 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768532108194 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768532108194 ""}
|
||||
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1768532108228 ""}
|
||||
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1768532108230 ""}
|
||||
{ "Critical Warning" "WFCUDA_FCUDA_SPS_DEVICE_POWER_LIMITATION" "" "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." { } { } 1 16562 "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." 0 0 "Fitter" 0 -1 1768532108246 ""}
|
||||
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M08SCM153I7G " "Device 10M08SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768532108246 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M04SCM153I7G " "Device 10M04SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768532108246 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1768532108246 ""}
|
||||
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "7 " "Fitter converted 7 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TMS~ G1 " "Pin ~ALTERA_TMS~ is reserved at location G1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TMS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 48 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532108248 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TCK~ J1 " "Pin ~ALTERA_TCK~ is reserved at location J1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TCK~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 50 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532108248 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDI~ H5 " "Pin ~ALTERA_TDI~ is reserved at location H5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDI~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 52 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532108248 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDO~ H4 " "Pin ~ALTERA_TDO~ is reserved at location H4" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDO~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 54 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532108248 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCONFIG~ E8 " "Pin ~ALTERA_nCONFIG~ is reserved at location E8" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nCONFIG~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 56 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532108248 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nSTATUS~ D6 " "Pin ~ALTERA_nSTATUS~ is reserved at location D6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nSTATUS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 58 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532108248 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONF_DONE~ E6 " "Pin ~ALTERA_CONF_DONE~ is reserved at location E6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_CONF_DONE~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 60 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768532108248 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1768532108248 ""}
|
||||
{ "Info" "IFIOMGR_RESERVE_PIN_NO_DATA0" "" "DATA\[0\] dual-purpose pin not reserved" { } { } 0 169141 "DATA\[0\] dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768532108248 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "Data\[1\]/ASDO " "Data\[1\]/ASDO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768532108248 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "nCSO " "nCSO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768532108248 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "DCLK " "DCLK dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768532108248 ""}
|
||||
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1768532108248 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Register.sdc " "Synopsys Design Constraints File file not found: 'Register.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1768532108452 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1768532108452 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1768532108453 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1768532108453 ""}
|
||||
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1768532108453 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1768532108625 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768532108625 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768532108625 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768532108625 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768532108625 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1768532108625 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1768532108625 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1768532108625 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1768532108629 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1768532108629 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1768532108629 ""}
|
||||
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768532108632 ""}
|
||||
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1768532108634 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1768532108831 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768532108842 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1768532108847 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1768532108938 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768532108938 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1768532109155 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X9_Y0 X18_Y8 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8" { } { { "loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8"} { { 12 { 0 ""} 9 0 10 9 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1768532109225 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1768532109225 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1768532109236 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1768532109236 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768532109237 ""}
|
||||
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.03 " "Total time spent on timing analysis during the Fitter is 0.03 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1768532109322 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768532109325 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768532109426 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768532109426 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768532109524 ""}
|
||||
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768532109679 ""}
|
||||
{ "Warning" "WFIOMGR_FIOMGR_REFER_APPNOTE_447_TOP_LEVEL" "3 MAX 10 " "3 pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing MAX 10 Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." { { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "clk 3.3-V LVTTL J9 " "Pin clk uses I/O standard 3.3-V LVTTL at J9" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { clk } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "clk" } } } } { "Register.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp5Register/Register.v" 2 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 12 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768532109695 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "rst 3.3-V LVTTL J14 " "Pin rst uses I/O standard 3.3-V LVTTL at J14" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { rst } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "rst" } } } } { "Register.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp5Register/Register.v" 3 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 13 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768532109695 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "loop 3.3-V LVTTL J12 " "Pin loop uses I/O standard 3.3-V LVTTL at J12" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { loop } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "loop" } } } } { "Register.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp5Register/Register.v" 4 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp5Register/" { { 0 { 0 ""} 0 14 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768532109695 ""} } { } 0 169177 "%1!d! pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing %2!s! Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." 0 0 "Fitter" 0 -1 1768532109695 ""}
|
||||
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "/home/lanshuye/Projects/DCExp/Exp5Register/output_files/Register.fit.smsg " "Generated suppressed messages file /home/lanshuye/Projects/DCExp/Exp5Register/output_files/Register.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1768532109705 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1755 " "Peak virtual memory: 1755 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768532109820 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:55:09 2026 " "Processing ended: Fri Jan 16 10:55:09 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768532109820 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:02 " "Elapsed time: 00:00:02" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768532109820 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:02 " "Total CPU time (on all processors): 00:00:02" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768532109820 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1768532109820 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Fitter" 0 -1 1768532110724 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768532110725 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:55:10 2026 " "Processing started: Fri Jan 16 10:55:10 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768532110725 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1768532110725 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off Register -c Register " "Command: quartus_asm --read_settings_files=off --write_settings_files=off Register -c Register" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1768532110725 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1768532110795 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1768532110853 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1768532110856 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "336 " "Peak virtual memory: 336 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768532110929 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:55:10 2026 " "Processing ended: Fri Jan 16 10:55:10 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768532110929 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768532110929 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768532110929 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1768532110929 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Assembler" 0 -1 1768532111785 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Power Analyzer Quartus Prime " "Running Quartus Prime Power Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768532111785 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:55:11 2026 " "Processing started: Fri Jan 16 10:55:11 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768532111785 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Power Analyzer" 0 -1 1768532111785 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_pow --read_settings_files=off --write_settings_files=off Register -c Register " "Command: quartus_pow --read_settings_files=off --write_settings_files=off Register -c Register" { } { } 0 0 "Command: %1!s!" 0 0 "Power Analyzer" 0 -1 1768532111785 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Power Analyzer" 0 -1 1768532111857 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768532111860 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768532111860 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Register.sdc " "Synopsys Design Constraints File file not found: 'Register.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Power Analyzer" 0 -1 1768532111983 ""}
|
||||
{ "Warning" "WSTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT" "clk " "Node: clk was determined to be a clock but was found without an associated clock assignment." { { "Info" "ISTA_NODE_FOUND_WITHOUT_CLOCK_ASSIGNMENT_DETAILS" "Register data\[0\]~reg0 clk " "Register data\[0\]~reg0 is being clocked by clk" { } { } 0 13166 "%1!s! %2!s! is being clocked by %3!s!" 0 0 "Design Software" 0 -1 1768532111983 ""} } { } 0 332060 "Node: %1!s! was determined to be a clock but was found without an associated clock assignment." 0 0 "Power Analyzer" 0 -1 1768532111983 "|Register|clk"}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Power Analyzer" 0 -1 1768532111983 ""}
|
||||
{ "Info" "IPVA_PVA_START_CALCULATION" "" "Starting Vectorless Power Activity Estimation" { } { } 0 223000 "Starting Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768532111985 ""}
|
||||
{ "Warning" "WPUTIL_PUTIL_NO_CLK_DOMAINS_FOUND" "" "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" { } { } 0 222013 "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" 0 0 "Power Analyzer" 0 -1 1768532111985 ""}
|
||||
{ "Info" "IPVA_PVA_END_CALCULATION" "" "Completed Vectorless Power Activity Estimation" { } { } 0 223001 "Completed Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768532111986 ""}
|
||||
{ "Info" "IPATFAM_USING_ADVANCED_IO_POWER" "" "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" { } { } 0 218000 "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" 0 0 "Power Analyzer" 0 -1 1768532112104 ""}
|
||||
{ "Warning" "WPAN_PAN_NO_THERMAL_MODEL_SELECTED" "" "No board thermal model was selected. Analyzing without board thermal modeling." { } { } 0 215044 "No board thermal model was selected. Analyzing without board thermal modeling." 0 0 "Power Analyzer" 0 -1 1768532112105 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Power Analyzer" 0 -1 1768532112124 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Power Analyzer" 0 -1 1768532112232 ""}
|
||||
{ "Info" "IPAN_AVG_TOGGLE_RATE_PER_DESIGN" "0.000 millions of transitions / sec " "Average toggle rate for this design is 0.000 millions of transitions / sec" { } { } 0 215049 "Average toggle rate for this design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768532112327 ""}
|
||||
{ "Info" "IPAN_PAN_TOTAL_POWER_ESTIMATION" "113.20 mW " "Total thermal power estimate for the design is 113.20 mW" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "" { Report "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "Compiler" "" "" "" "" { } "PowerPlay Power Analyzer Summary" } } } 0 215031 "Total thermal power estimate for the design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768532112337 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Power Analyzer 0 s 6 s Quartus Prime " "Quartus Prime Power Analyzer was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "905 " "Peak virtual memory: 905 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768532112386 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:55:12 2026 " "Processing ended: Fri Jan 16 10:55:12 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768532112386 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768532112386 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768532112386 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Power Analyzer" 0 -1 1768532112386 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Power Analyzer" 0 -1 1768532113236 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768532113237 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:55:13 2026 " "Processing started: Fri Jan 16 10:55:13 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768532113237 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1768532113237 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta Register -c Register " "Command: quartus_sta Register -c Register" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1768532113237 ""}
|
||||
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1768532113252 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1768532113293 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1768532113293 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532113312 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532113312 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Register.sdc " "Synopsys Design Constraints File file not found: 'Register.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1768532113351 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532113351 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_INFO" "Deriving Clocks " "Deriving Clocks" { { "Info" "ISTA_DERIVE_CLOCKS_INFO" "create_clock -period 1.000 -name clk clk " "create_clock -period 1.000 -name clk clk" { } { } 0 332105 "%1!s!" 0 0 "Design Software" 0 -1 1768532113352 ""} } { } 0 332105 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768532113352 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1768532113352 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768532113352 ""}
|
||||
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1768532113352 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV 100C Model" { } { } 0 0 "Analyzing Slow 1200mV 100C Model" 0 0 "Timing Analyzer" 0 0 1768532113354 ""}
|
||||
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1768532113355 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "setup 0.169 " "Worst-case setup slack is 0.169" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113355 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113355 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.169 0.000 clk " " 0.169 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113355 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532113355 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.449 " "Worst-case hold slack is 0.449" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113355 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113355 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.449 0.000 clk " " 0.449 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113355 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532113355 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768532113356 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768532113356 ""}
|
||||
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768532113356 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113356 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113356 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -15.627 clk " " -3.000 -15.627 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113356 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532113356 ""}
|
||||
{ "Info" "ISTA_REPORT_METASTABILITY_INFO" "Report Metastability: Found 1 synchronizer chains. " "Report Metastability: Found 1 synchronizer chains." { { "Info" "ISTA_REPORT_METASTABILITY_INFO" "The design MTBF is not calculated because there are no specified synchronizers in the design. " "The design MTBF is not calculated because there are no specified synchronizers in the design." { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113359 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Number of Synchronizer Chains Found: 1 " "Number of Synchronizer Chains Found: 1" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113359 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Shortest Synchronizer Chain: 2 Registers " "Shortest Synchronizer Chain: 2 Registers" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113359 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Fraction of Chains for which MTBFs Could Not be Calculated: 1.000 " "Fraction of Chains for which MTBFs Could Not be Calculated: 1.000" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113359 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Worst Case Available Settling Time: 0.387 ns " "Worst Case Available Settling Time: 0.387 ns" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113359 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" " " "" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113359 ""} } { } 0 332114 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768532113359 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV -40C Model" { } { } 0 0 "Analyzing Slow 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768532113360 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1768532113368 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1768532113481 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768532113491 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "setup 0.272 " "Worst-case setup slack is 0.272" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113492 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113492 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.272 0.000 clk " " 0.272 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113492 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532113492 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.409 " "Worst-case hold slack is 0.409" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113492 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113492 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.409 0.000 clk " " 0.409 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113492 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532113492 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768532113493 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768532113493 ""}
|
||||
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768532113493 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113493 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113493 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -15.627 clk " " -3.000 -15.627 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113493 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532113493 ""}
|
||||
{ "Info" "ISTA_REPORT_METASTABILITY_INFO" "Report Metastability: Found 1 synchronizer chains. " "Report Metastability: Found 1 synchronizer chains." { { "Info" "ISTA_REPORT_METASTABILITY_INFO" "The design MTBF is not calculated because there are no specified synchronizers in the design. " "The design MTBF is not calculated because there are no specified synchronizers in the design." { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113496 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Number of Synchronizer Chains Found: 1 " "Number of Synchronizer Chains Found: 1" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113496 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Shortest Synchronizer Chain: 2 Registers " "Shortest Synchronizer Chain: 2 Registers" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113496 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Fraction of Chains for which MTBFs Could Not be Calculated: 1.000 " "Fraction of Chains for which MTBFs Could Not be Calculated: 1.000" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113496 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Worst Case Available Settling Time: 0.594 ns " "Worst Case Available Settling Time: 0.594 ns" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113496 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" " " "" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113496 ""} } { } 0 332114 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768532113496 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1200mV -40C Model" { } { } 0 0 "Analyzing Fast 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768532113496 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768532113543 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "setup 0.675 " "Worst-case setup slack is 0.675" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113544 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113544 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.675 0.000 clk " " 0.675 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113544 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532113544 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "hold 0.165 " "Worst-case hold slack is 0.165" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113544 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113544 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " 0.165 0.000 clk " " 0.165 0.000 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113544 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532113544 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768532113545 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768532113545 ""}
|
||||
{ "Critical Warning" "WSTA_TIMING_NOT_MET" "" "Timing requirements not met" { } { } 1 332148 "Timing requirements not met" 0 0 "Timing Analyzer" 0 -1 1768532113545 ""}
|
||||
{ "Info" "ISTA_WORST_CASE_SLACK" "minimum pulse width -3.000 " "Worst-case minimum pulse width slack is -3.000" { { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " Slack End Point TNS Clock " " Slack End Point TNS Clock " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113546 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" "========= =================== ===================== " "========= =================== =====================" { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113546 ""} { "Info" "ISTA_CREATE_TIMING_SUMMARY_INFO" " -3.000 -13.962 clk " " -3.000 -13.962 clk " { } { } 0 332119 "%1!s!" 0 0 "Design Software" 0 -1 1768532113546 ""} } { } 0 332146 "Worst-case %1!s! slack is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768532113546 ""}
|
||||
{ "Info" "ISTA_REPORT_METASTABILITY_INFO" "Report Metastability: Found 1 synchronizer chains. " "Report Metastability: Found 1 synchronizer chains." { { "Info" "ISTA_REPORT_METASTABILITY_INFO" "The design MTBF is not calculated because there are no specified synchronizers in the design. " "The design MTBF is not calculated because there are no specified synchronizers in the design." { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113548 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Number of Synchronizer Chains Found: 1 " "Number of Synchronizer Chains Found: 1" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113548 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Shortest Synchronizer Chain: 2 Registers " "Shortest Synchronizer Chain: 2 Registers" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113548 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Fraction of Chains for which MTBFs Could Not be Calculated: 1.000 " "Fraction of Chains for which MTBFs Could Not be Calculated: 1.000" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113548 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" "Worst Case Available Settling Time: 1.363 ns " "Worst Case Available Settling Time: 1.363 ns" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113548 ""} { "Info" "ISTA_REPORT_METASTABILITY_INFO" " " "" { } { } 0 332114 "%1!s!" 0 0 "Design Software" 0 -1 1768532113548 ""} } { } 0 332114 "%1!s!" 0 0 "Timing Analyzer" 0 -1 1768532113548 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768532113921 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768532113921 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "596 " "Peak virtual memory: 596 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768532113929 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:55:13 2026 " "Processing ended: Fri Jan 16 10:55:13 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768532113929 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768532113929 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768532113929 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1768532113929 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Timing Analyzer" 0 -1 1768532114828 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768532114828 ""} { "Info" "IQEXE_START_BANNER_TIME" "Fri Jan 16 10:55:14 2026 " "Processing started: Fri Jan 16 10:55:14 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768532114828 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768532114828 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off Register -c Register " "Command: quartus_eda --read_settings_files=off --write_settings_files=off Register -c Register" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768532114828 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1768532114916 ""}
|
||||
{ "Info" "IWSC_DONE_HDL_GENERATION" "Register.vo /home/lanshuye/Projects/DCExp/Exp5Register/simulation/questa/ simulation " "Generated file Register.vo in folder \"/home/lanshuye/Projects/DCExp/Exp5Register/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1768532114939 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "583 " "Peak virtual memory: 583 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768532114944 ""} { "Info" "IQEXE_END_BANNER_TIME" "Fri Jan 16 10:55:14 2026 " "Processing ended: Fri Jan 16 10:55:14 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768532114944 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768532114944 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768532114944 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768532114944 ""}
|
||||
{ "Info" "IFLOW_ERROR_COUNT" "Full Compilation 0 s 20 s " "Quartus Prime Full Compilation was successful. 0 errors, 20 warnings" { } { } 0 293000 "Quartus Prime %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768532115523 ""}
|
||||
在新工单中引用
屏蔽一个用户