first commit
这个提交包含在:
二进制
Exp4Displayer/db/.cmp.kpt
普通文件
二进制
Exp4Displayer/db/.cmp.kpt
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.(0).cnf.cdb
普通文件
二进制
Exp4Displayer/db/Exp4.(0).cnf.cdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.(0).cnf.hdb
普通文件
二进制
Exp4Displayer/db/Exp4.(0).cnf.hdb
普通文件
二进制文件未显示。
@ -0,0 +1,7 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768470421722 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768470421722 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 17:47:01 2026 " "Processing started: Thu Jan 15 17:47:01 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768470421722 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1768470421722 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off Exp4 -c Exp4 " "Command: quartus_asm --read_settings_files=off --write_settings_files=off Exp4 -c Exp4" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1768470421722 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1768470421797 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1768470421853 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1768470421856 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "336 " "Peak virtual memory: 336 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768470421929 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 17:47:01 2026 " "Processing ended: Thu Jan 15 17:47:01 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768470421929 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768470421929 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768470421929 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1768470421929 ""}
|
||||
二进制
Exp4Displayer/db/Exp4.asm.rdb
普通文件
二进制
Exp4Displayer/db/Exp4.asm.rdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.asm_labs.ddb
普通文件
二进制
Exp4Displayer/db/Exp4.asm_labs.ddb
普通文件
二进制文件未显示。
@ -0,0 +1,5 @@
|
||||
<?xml version="1.0" ?>
|
||||
<LOG_ROOT>
|
||||
<PROJECT NAME="Exp4">
|
||||
</PROJECT>
|
||||
</LOG_ROOT>
|
||||
二进制
Exp4Displayer/db/Exp4.cmp.bpm
普通文件
二进制
Exp4Displayer/db/Exp4.cmp.bpm
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.cmp.cdb
普通文件
二进制
Exp4Displayer/db/Exp4.cmp.cdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.cmp.hdb
普通文件
二进制
Exp4Displayer/db/Exp4.cmp.hdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.cmp.idb
普通文件
二进制
Exp4Displayer/db/Exp4.cmp.idb
普通文件
二进制文件未显示。
68
Exp4Displayer/db/Exp4.cmp.logdb
普通文件
68
Exp4Displayer/db/Exp4.cmp.logdb
普通文件
@ -0,0 +1,68 @@
|
||||
v1
|
||||
IO_RULES,NUM_CLKS_NOT_EXCEED_CLKS_AVAILABLE,INAPPLICABLE,IO_000002,Capacity Checks,Number of clocks in an I/O bank should not exceed the number of clocks available.,Critical,No Global Signal assignments found.,,I/O,,
|
||||
IO_RULES,NUM_PINS_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000001,Capacity Checks,Number of pins in an I/O bank should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,NUM_VREF_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000003,Capacity Checks,Number of pins in a Vrefgroup should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,IO_BANK_SUPPORT_VCCIO,INAPPLICABLE,IO_000004,Voltage Compatibility Checks,The I/O bank should support the requested VCCIO.,Critical,No IOBANK_VCCIO assignments found.,,I/O,,
|
||||
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VREF,INAPPLICABLE,IO_000005,Voltage Compatibility Checks,The I/O bank should not have competing VREF values.,Critical,No VREF I/O Standard assignments found.,,I/O,,
|
||||
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VCCIO,PASS,IO_000006,Voltage Compatibility Checks,The I/O bank should not have competing VCCIO values.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,CHECK_UNAVAILABLE_LOC,PASS,IO_000007,Valid Location Checks,Checks for unavailable locations.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,CHECK_RESERVED_LOC,INAPPLICABLE,IO_000008,Valid Location Checks,Checks for reserved locations.,Critical,No reserved LogicLock region found.,,I/O,,
|
||||
IO_RULES,OCT_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000047,I/O Properties Checks for One I/O,On Chip Termination and Slew Rate should not be used at the same time.,Critical,No Slew Rate assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000046,I/O Properties Checks for One I/O,The location should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000045,I/O Properties Checks for One I/O,The I/O standard should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
|
||||
IO_RULES,WEAK_PULL_UP_AND_BUS_HOLD_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000027,I/O Properties Checks for One I/O,Weak Pull Up and Bus Hold should not be used at the same time.,Critical,No Enable Bus-Hold Circuitry or Weak Pull-Up Resistor assignments found.,,I/O,,
|
||||
IO_RULES,OCT_AND_CURRENT_STRENGTH_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000026,I/O Properties Checks for One I/O,On Chip Termination and Current Strength should not be used at the same time.,Critical,No Current Strength assignments found.,,I/O,,
|
||||
IO_RULES,IO_DIR_SUPPORT_OCT_VALUE,PASS,IO_000024,I/O Properties Checks for One I/O,The I/O direction should support the On Chip Termination value.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_OPEN_DRAIN_VALUE,INAPPLICABLE,IO_000023,I/O Properties Checks for One I/O,The I/O standard should support the Open Drain value.,Critical,No open drain assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000022,I/O Properties Checks for One I/O,The I/O standard should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000021,I/O Properties Checks for One I/O,The I/O standard should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_PCI_CLAMP_DIODE,PASS,IO_000020,I/O Properties Checks for One I/O,The I/O standard should support the requested PCI Clamp Diode.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_OCT_VALUE,PASS,IO_000019,I/O Properties Checks for One I/O,The I/O standard should support the requested On Chip Termination value.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000018,I/O Properties Checks for One I/O,The I/O standard should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_PCI_CLAMP_DIODE,PASS,IO_000015,I/O Properties Checks for One I/O,The location should support the requested PCI Clamp Diode.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000014,I/O Properties Checks for One I/O,The location should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000013,I/O Properties Checks for One I/O,The location should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_OCT_VALUE,PASS,IO_000012,I/O Properties Checks for One I/O,The location should support the requested On Chip Termination value.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000011,I/O Properties Checks for One I/O,The location should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_IO_DIR,PASS,IO_000010,I/O Properties Checks for One I/O,The location should support the requested I/O direction.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_IO_STD,PASS,IO_000009,I/O Properties Checks for One I/O,The location should support the requested I/O standard.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,CURRENT_DENSITY_FOR_CONSECUTIVE_IO_NOT_EXCEED_CURRENT_VALUE,PASS,IO_000033,Electromigration Checks,Current density for consecutive I/Os should not exceed 160mA for row I/Os and 160mA for column I/Os.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,SINGLE_ENDED_OUTPUTS_LAB_ROWS_FROM_DIFF_IO,INAPPLICABLE,IO_000034,SI Related Distance Checks,Single-ended outputs should be 5 LAB row(s) away from a differential I/O.,High,No Differential I/O Standard assignments found.,,I/O,,
|
||||
IO_RULES,MAX_20_OUTPUTS_ALLOWED_IN_VREFGROUP,INAPPLICABLE,IO_000042,SI Related SSO Limit Checks,No more than 20 outputs are allowed in a VREF group when VREF is being read from.,High,No VREF I/O Standard assignments found.,,I/O,,
|
||||
IO_RULES,DEV_IO_RULE_OCT_DISCLAIMER,,,,,,,,,,
|
||||
IO_RULES_MATRIX,Pin/Rules,IO_000002;IO_000001;IO_000003;IO_000004;IO_000005;IO_000006;IO_000007;IO_000008;IO_000047;IO_000046;IO_000045;IO_000027;IO_000026;IO_000024;IO_000023;IO_000022;IO_000021;IO_000020;IO_000019;IO_000018;IO_000015;IO_000014;IO_000013;IO_000012;IO_000011;IO_000010;IO_000009;IO_000033;IO_000034;IO_000042,
|
||||
IO_RULES_MATRIX,Total Pass,0;26;26;0;0;26;26;0;0;0;0;0;0;18;0;0;0;8;18;0;8;0;0;18;0;26;26;26;0;0,
|
||||
IO_RULES_MATRIX,Total Unchecked,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
|
||||
IO_RULES_MATRIX,Total Inapplicable,26;0;0;26;26;0;0;26;26;26;26;26;26;8;26;26;26;18;8;26;18;26;26;8;26;0;0;0;26;26,
|
||||
IO_RULES_MATRIX,Total Fail,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
|
||||
IO_RULES_MATRIX,seg_data_2[0],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,seg_data_2[1],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,seg_data_2[2],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,seg_data_2[3],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[8],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[7],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[6],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[5],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[4],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[3],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[2],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[1],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_1[0],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[8],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[7],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[6],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[5],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[4],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[3],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[2],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[1],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,segment_led_2[0],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,seg_data_1[3],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,seg_data_1[2],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,seg_data_1[1],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,seg_data_1[0],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_SUMMARY,Total I/O Rules,30,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Passed,12,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Failed,0,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Unchecked,0,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Inapplicable,18,
|
||||
二进制
Exp4Displayer/db/Exp4.cmp.rdb
普通文件
二进制
Exp4Displayer/db/Exp4.cmp.rdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.cmp_merge.kpt
普通文件
二进制
Exp4Displayer/db/Exp4.cmp_merge.kpt
普通文件
二进制文件未显示。
@ -0,0 +1,3 @@
|
||||
Quartus_Version = Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Version_Index = 604268800
|
||||
Creation_Time = Thu Jan 15 23:17:22 2026
|
||||
@ -0,0 +1,6 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768470425911 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768470425911 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 17:47:05 2026 " "Processing started: Thu Jan 15 17:47:05 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768470425911 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768470425911 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off Exp4 -c Exp4 " "Command: quartus_eda --read_settings_files=off --write_settings_files=off Exp4 -c Exp4" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768470425911 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1768470425999 ""}
|
||||
{ "Info" "IWSC_DONE_HDL_GENERATION" "Exp4.vo /home/lanshuye/Projects/DCExp/Exp4Displayer/simulation/questa/ simulation " "Generated file Exp4.vo in folder \"/home/lanshuye/Projects/DCExp/Exp4Displayer/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1768470426021 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "583 " "Peak virtual memory: 583 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768470426027 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 17:47:06 2026 " "Processing ended: Thu Jan 15 17:47:06 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768470426027 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768470426027 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768470426027 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768470426027 ""}
|
||||
51
Exp4Displayer/db/Exp4.fit.qmsg
普通文件
51
Exp4Displayer/db/Exp4.fit.qmsg
普通文件
@ -0,0 +1,51 @@
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1768470419253 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1768470419253 ""}
|
||||
{ "Info" "IMPP_MPP_USER_DEVICE" "Exp4 10M02SCM153I7G " "Selected device 10M02SCM153I7G for design \"Exp4\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1768470419256 ""}
|
||||
{ "Info" "IMPP_MPP_BOOT_SEL_PIN_NOT_RESERVED" "" "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." { } { } 0 22896 "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." 0 0 "Fitter" 0 -1 1768470419276 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768470419276 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768470419276 ""}
|
||||
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1768470419311 ""}
|
||||
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1768470419313 ""}
|
||||
{ "Critical Warning" "WFCUDA_FCUDA_SPS_DEVICE_POWER_LIMITATION" "" "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." { } { } 1 16562 "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." 0 0 "Fitter" 0 -1 1768470419329 ""}
|
||||
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M08SCM153I7G " "Device 10M08SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768470419330 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M04SCM153I7G " "Device 10M04SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768470419330 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1768470419330 ""}
|
||||
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "7 " "Fitter converted 7 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TMS~ G1 " "Pin ~ALTERA_TMS~ is reserved at location G1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TMS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 88 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470419331 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TCK~ J1 " "Pin ~ALTERA_TCK~ is reserved at location J1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TCK~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 90 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470419331 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDI~ H5 " "Pin ~ALTERA_TDI~ is reserved at location H5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDI~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 92 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470419331 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDO~ H4 " "Pin ~ALTERA_TDO~ is reserved at location H4" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDO~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 94 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470419331 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCONFIG~ E8 " "Pin ~ALTERA_nCONFIG~ is reserved at location E8" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nCONFIG~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 96 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470419331 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nSTATUS~ D6 " "Pin ~ALTERA_nSTATUS~ is reserved at location D6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nSTATUS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 98 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470419331 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONF_DONE~ E6 " "Pin ~ALTERA_CONF_DONE~ is reserved at location E6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_CONF_DONE~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 100 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470419331 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1768470419331 ""}
|
||||
{ "Info" "IFIOMGR_RESERVE_PIN_NO_DATA0" "" "DATA\[0\] dual-purpose pin not reserved" { } { } 0 169141 "DATA\[0\] dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768470419331 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "Data\[1\]/ASDO " "Data\[1\]/ASDO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768470419331 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "nCSO " "nCSO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768470419331 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "DCLK " "DCLK dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768470419331 ""}
|
||||
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1768470419331 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Exp4.sdc " "Synopsys Design Constraints File file not found: 'Exp4.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1768470419458 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1768470419458 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1768470419458 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1768470419458 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1768470419459 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1768470419459 ""}
|
||||
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1768470419459 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1768470419460 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768470419460 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768470419460 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768470419460 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768470419460 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1768470419461 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1768470419461 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1768470419461 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1768470419461 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1768470419461 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1768470419461 ""}
|
||||
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768470419466 ""}
|
||||
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1768470419467 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1768470419678 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768470419686 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1768470419690 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1768470419729 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768470419729 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1768470419968 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X9_Y0 X18_Y8 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8" { } { { "loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8"} { { 12 { 0 ""} 9 0 10 9 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1768470420043 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1768470420043 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1768470420051 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1768470420051 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1768470420051 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768470420051 ""}
|
||||
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.01 " "Total time spent on timing analysis during the Fitter is 0.01 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1768470420139 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768470420144 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768470420257 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768470420257 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768470420375 ""}
|
||||
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768470420595 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1757 " "Peak virtual memory: 1757 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768470420761 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 17:47:00 2026 " "Processing ended: Thu Jan 15 17:47:00 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768470420761 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768470420761 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:02 " "Total CPU time (on all processors): 00:00:02" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768470420761 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1768470420761 ""}
|
||||
33
Exp4Displayer/db/Exp4.hier_info
普通文件
33
Exp4Displayer/db/Exp4.hier_info
普通文件
@ -0,0 +1,33 @@
|
||||
|Exp4
|
||||
seg_data_1[3] => Add0.IN8
|
||||
seg_data_1[3] => seg.RADDR
|
||||
seg_data_1[2] => Add0.IN7
|
||||
seg_data_1[2] => seg.RADDR1
|
||||
seg_data_1[1] => Add0.IN6
|
||||
seg_data_1[1] => seg.RADDR2
|
||||
seg_data_1[0] => Add0.IN5
|
||||
seg_data_1[0] => seg.RADDR3
|
||||
seg_data_2[0] => ~NO_FANOUT~
|
||||
seg_data_2[1] => ~NO_FANOUT~
|
||||
seg_data_2[2] => ~NO_FANOUT~
|
||||
seg_data_2[3] => ~NO_FANOUT~
|
||||
segment_led_1[8] <= seg.DATAOUT
|
||||
segment_led_1[7] <= seg.DATAOUT1
|
||||
segment_led_1[6] <= seg.DATAOUT2
|
||||
segment_led_1[5] <= seg.DATAOUT3
|
||||
segment_led_1[4] <= seg.DATAOUT4
|
||||
segment_led_1[3] <= seg.DATAOUT5
|
||||
segment_led_1[2] <= seg.DATAOUT6
|
||||
segment_led_1[1] <= seg.DATAOUT7
|
||||
segment_led_1[0] <= seg.DATAOUT8
|
||||
segment_led_2[8] <= seg.PORTBDATAOUT
|
||||
segment_led_2[7] <= seg.PORTBDATAOUT1
|
||||
segment_led_2[6] <= seg.PORTBDATAOUT2
|
||||
segment_led_2[5] <= seg.PORTBDATAOUT3
|
||||
segment_led_2[4] <= seg.PORTBDATAOUT4
|
||||
segment_led_2[3] <= seg.PORTBDATAOUT5
|
||||
segment_led_2[2] <= seg.PORTBDATAOUT6
|
||||
segment_led_2[1] <= seg.PORTBDATAOUT7
|
||||
segment_led_2[0] <= seg.PORTBDATAOUT8
|
||||
|
||||
|
||||
二进制
Exp4Displayer/db/Exp4.hif
普通文件
二进制
Exp4Displayer/db/Exp4.hif
普通文件
二进制文件未显示。
18
Exp4Displayer/db/Exp4.lpc.html
普通文件
18
Exp4Displayer/db/Exp4.lpc.html
普通文件
@ -0,0 +1,18 @@
|
||||
<TABLE>
|
||||
<TR bgcolor="#C0C0C0">
|
||||
<TH>Hierarchy</TH>
|
||||
<TH>Input</TH>
|
||||
<TH>Constant Input</TH>
|
||||
<TH>Unused Input</TH>
|
||||
<TH>Floating Input</TH>
|
||||
<TH>Output</TH>
|
||||
<TH>Constant Output</TH>
|
||||
<TH>Unused Output</TH>
|
||||
<TH>Floating Output</TH>
|
||||
<TH>Bidir</TH>
|
||||
<TH>Constant Bidir</TH>
|
||||
<TH>Unused Bidir</TH>
|
||||
<TH>Input only Bidir</TH>
|
||||
<TH>Output only Bidir</TH>
|
||||
</TR>
|
||||
</TABLE>
|
||||
二进制
Exp4Displayer/db/Exp4.lpc.rdb
普通文件
二进制
Exp4Displayer/db/Exp4.lpc.rdb
普通文件
二进制文件未显示。
@ -0,0 +1,5 @@
|
||||
+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
|
||||
; Legal Partition Candidates ;
|
||||
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+
|
||||
; Hierarchy ; Input ; Constant Input ; Unused Input ; Floating Input ; Output ; Constant Output ; Unused Output ; Floating Output ; Bidir ; Constant Bidir ; Unused Bidir ; Input only Bidir ; Output only Bidir ;
|
||||
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+
|
||||
二进制
Exp4Displayer/db/Exp4.map.ammdb
普通文件
二进制
Exp4Displayer/db/Exp4.map.ammdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.map.bpm
普通文件
二进制
Exp4Displayer/db/Exp4.map.bpm
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.map.cdb
普通文件
二进制
Exp4Displayer/db/Exp4.map.cdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.map.hdb
普通文件
二进制
Exp4Displayer/db/Exp4.map.hdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.map.kpt
普通文件
二进制
Exp4Displayer/db/Exp4.map.kpt
普通文件
二进制文件未显示。
@ -0,0 +1 @@
|
||||
v1
|
||||
21
Exp4Displayer/db/Exp4.map.qmsg
普通文件
21
Exp4Displayer/db/Exp4.map.qmsg
普通文件
@ -0,0 +1,21 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768470414271 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768470414271 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 17:46:54 2026 " "Processing started: Thu Jan 15 17:46:54 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768470414271 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768470414271 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off Exp4 -c Exp4 " "Command: quartus_map --read_settings_files=on --write_settings_files=off Exp4 -c Exp4" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768470414271 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1768470414352 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1768470414352 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Seg.v 1 1 " "Found 1 design units, including 1 entities, in source file Seg.v" { { "Info" "ISGN_ENTITY_NAME" "1 Exp4 " "Found entity 1: Exp4" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768470417977 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768470417977 ""}
|
||||
{ "Info" "ISGN_START_ELABORATION_TOP" "Exp4 " "Elaborating entity \"Exp4\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1768470417998 ""}
|
||||
{ "Warning" "WVRFX_VDB_DRIVERLESS_NET" "seg.data_a 0 Seg.v(8) " "Net \"seg.data_a\" at Seg.v(8) has no driver or initial value, using a default initial value '0'" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 8 0 0 } } } 0 10030 "Net \"%1!s!\" at %3!s! has no driver or initial value, using a default initial value '%2!c!'" 0 0 "Analysis & Synthesis" 0 -1 1768470417999 "|Exp4"}
|
||||
{ "Warning" "WVRFX_VDB_DRIVERLESS_NET" "seg.waddr_a 0 Seg.v(8) " "Net \"seg.waddr_a\" at Seg.v(8) has no driver or initial value, using a default initial value '0'" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 8 0 0 } } } 0 10030 "Net \"%1!s!\" at %3!s! has no driver or initial value, using a default initial value '%2!c!'" 0 0 "Analysis & Synthesis" 0 -1 1768470417999 "|Exp4"}
|
||||
{ "Warning" "WVRFX_VDB_DRIVERLESS_NET" "seg.we_a 0 Seg.v(8) " "Net \"seg.we_a\" at Seg.v(8) has no driver or initial value, using a default initial value '0'" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 8 0 0 } } } 0 10030 "Net \"%1!s!\" at %3!s! has no driver or initial value, using a default initial value '%2!c!'" 0 0 "Analysis & Synthesis" 0 -1 1768470417999 "|Exp4"}
|
||||
{ "Warning" "WCDB_CDB_RAM_MIF_CONTAIN_DONT_CARE" "/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif " "Memory Initialization File or Hexadecimal (Intel-Format) File \"/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif\" contains \"don't care\" values -- overwriting them with 0s" { } { } 0 127007 "Memory Initialization File or Hexadecimal (Intel-Format) File \"%1!s!\" contains \"don't care\" values -- overwriting them with 0s" 0 0 "Analysis & Synthesis" 0 -1 1768470418048 ""}
|
||||
{ "Warning" "WCDB_CDB_RAM_MIF_CONTAIN_DONT_CARE" "/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif " "Memory Initialization File or Hexadecimal (Intel-Format) File \"/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif\" contains \"don't care\" values -- overwriting them with 0s" { } { } 0 127007 "Memory Initialization File or Hexadecimal (Intel-Format) File \"%1!s!\" contains \"don't care\" values -- overwriting them with 0s" 0 0 "Analysis & Synthesis" 0 -1 1768470418048 ""}
|
||||
{ "Warning" "WCDB_CDB_RAM_MIF_CONTAIN_DONT_CARE" "/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif " "Memory Initialization File or Hexadecimal (Intel-Format) File \"/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif\" contains \"don't care\" values -- overwriting them with 0s" { } { } 0 127007 "Memory Initialization File or Hexadecimal (Intel-Format) File \"%1!s!\" contains \"don't care\" values -- overwriting them with 0s" 0 0 "Analysis & Synthesis" 0 -1 1768470418048 ""}
|
||||
{ "Info" "IINFER_UNINFERRED_RAM_SUMMARY" "1 " "Found 1 instances of uninferred RAM logic" { { "Info" "IINFER_MIF_NOT_SUPPORTED_FOR_HARDCOPY" "seg " "RAM logic \"seg\" is uninferred because MIF is not supported for the selected family" { } { { "Seg.v" "seg" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 8 -1 0 } } } 0 276013 "RAM logic \"%1!s!\" is uninferred because MIF is not supported for the selected family" 0 0 "Design Software" 0 -1 1768470418054 ""} } { } 0 276014 "Found %1!d! instances of uninferred RAM logic" 0 0 "Analysis & Synthesis" 0 -1 1768470418054 ""}
|
||||
{ "Warning" "WCDB_CDB_RAM_MIF_CONTAIN_DONT_CARE" "/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif " "Memory Initialization File or Hexadecimal (Intel-Format) File \"/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif\" contains \"don't care\" values -- overwriting them with 0s" { } { } 0 127007 "Memory Initialization File or Hexadecimal (Intel-Format) File \"%1!s!\" contains \"don't care\" values -- overwriting them with 0s" 0 0 "Analysis & Synthesis" 0 -1 1768470418060 ""}
|
||||
{ "Warning" "WMLS_MLS_STUCK_PIN_HDR" "" "Output pins are stuck at VCC or GND" { { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_1\[1\] GND " "Pin \"segment_led_1\[1\]\" is stuck at GND" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 5 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768470418120 "|Exp4|segment_led_1[1]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_1\[0\] GND " "Pin \"segment_led_1\[0\]\" is stuck at GND" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 5 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768470418120 "|Exp4|segment_led_1[0]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_2\[1\] GND " "Pin \"segment_led_2\[1\]\" is stuck at GND" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768470418120 "|Exp4|segment_led_2[1]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_2\[0\] GND " "Pin \"segment_led_2\[0\]\" is stuck at GND" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768470418120 "|Exp4|segment_led_2[0]"} } { } 0 13024 "Output pins are stuck at VCC or GND" 0 0 "Analysis & Synthesis" 0 -1 1768470418120 ""}
|
||||
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1768470418139 ""}
|
||||
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1768470418269 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768470418269 ""}
|
||||
{ "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN_HDR" "4 " "Design contains 4 input pin(s) that do not drive logic" { { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "seg_data_2\[0\] " "No output dependent on input pin \"seg_data_2\[0\]\"" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 4 0 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1768470418280 "|Exp4|seg_data_2[0]"} { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "seg_data_2\[1\] " "No output dependent on input pin \"seg_data_2\[1\]\"" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 4 0 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1768470418280 "|Exp4|seg_data_2[1]"} { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "seg_data_2\[2\] " "No output dependent on input pin \"seg_data_2\[2\]\"" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 4 0 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1768470418280 "|Exp4|seg_data_2[2]"} { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "seg_data_2\[3\] " "No output dependent on input pin \"seg_data_2\[3\]\"" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 4 0 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1768470418280 "|Exp4|seg_data_2[3]"} } { } 0 21074 "Design contains %1!d! input pin(s) that do not drive logic" 0 0 "Analysis & Synthesis" 0 -1 1768470418280 ""}
|
||||
{ "Info" "ICUT_CUT_TM_SUMMARY" "40 " "Implemented 40 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "8 " "Implemented 8 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1768470418280 ""} { "Info" "ICUT_CUT_TM_OPINS" "18 " "Implemented 18 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1768470418280 ""} { "Info" "ICUT_CUT_TM_LCELLS" "14 " "Implemented 14 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1768470418280 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1768470418280 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 18 s Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 18 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "409 " "Peak virtual memory: 409 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768470418283 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 17:46:58 2026 " "Processing ended: Thu Jan 15 17:46:58 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768470418283 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768470418283 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:13 " "Total CPU time (on all processors): 00:00:13" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768470418283 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768470418283 ""}
|
||||
二进制
Exp4Displayer/db/Exp4.map.rdb
普通文件
二进制
Exp4Displayer/db/Exp4.map.rdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.map_bb.cdb
普通文件
二进制
Exp4Displayer/db/Exp4.map_bb.cdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.map_bb.hdb
普通文件
二进制
Exp4Displayer/db/Exp4.map_bb.hdb
普通文件
二进制文件未显示。
@ -0,0 +1 @@
|
||||
v1
|
||||
@ -0,0 +1,5 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768490273268 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Netlist Viewers Preprocess Quartus Prime " "Running Quartus Prime Netlist Viewers Preprocess" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768490273268 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 23:17:53 2026 " "Processing started: Thu Jan 15 23:17:53 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768490273268 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Netlist Viewers Preprocess" 0 -1 1768490273268 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_npp Exp4 -c Exp4 --netlist_type=sgate " "Command: quartus_npp Exp4 -c Exp4 --netlist_type=sgate" { } { } 0 0 "Command: %1!s!" 0 0 "Netlist Viewers Preprocess" 0 -1 1768490273268 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Netlist Viewers Preprocess" 0 -1 1768490273297 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Netlist Viewers Preprocess 0 s 1 Quartus Prime " "Quartus Prime Netlist Viewers Preprocess was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "484 " "Peak virtual memory: 484 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768490273303 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 23:17:53 2026 " "Processing ended: Thu Jan 15 23:17:53 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768490273303 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768490273303 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768490273303 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Netlist Viewers Preprocess" 0 -1 1768490273303 ""}
|
||||
18
Exp4Displayer/db/Exp4.pow.qmsg
普通文件
18
Exp4Displayer/db/Exp4.pow.qmsg
普通文件
@ -0,0 +1,18 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768470422789 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Power Analyzer Quartus Prime " "Running Quartus Prime Power Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768470422789 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 17:47:02 2026 " "Processing started: Thu Jan 15 17:47:02 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768470422789 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Power Analyzer" 0 -1 1768470422789 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_pow --read_settings_files=off --write_settings_files=off Exp4 -c Exp4 " "Command: quartus_pow --read_settings_files=off --write_settings_files=off Exp4 -c Exp4" { } { } 0 0 "Command: %1!s!" 0 0 "Power Analyzer" 0 -1 1768470422789 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Power Analyzer" 0 -1 1768470422864 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768470422866 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768470422866 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Exp4.sdc " "Synopsys Design Constraints File file not found: 'Exp4.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Power Analyzer" 0 -1 1768470422994 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Power Analyzer" 0 -1 1768470422995 ""}
|
||||
{ "Info" "IPVA_PVA_START_CALCULATION" "" "Starting Vectorless Power Activity Estimation" { } { } 0 223000 "Starting Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768470422997 ""}
|
||||
{ "Warning" "WPUTIL_PUTIL_NO_CLK_DOMAINS_FOUND" "" "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" { } { } 0 222013 "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" 0 0 "Power Analyzer" 0 -1 1768470422998 ""}
|
||||
{ "Info" "IPVA_PVA_END_CALCULATION" "" "Completed Vectorless Power Activity Estimation" { } { } 0 223001 "Completed Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768470422998 ""}
|
||||
{ "Info" "IPATFAM_USING_ADVANCED_IO_POWER" "" "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" { } { } 0 218000 "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" 0 0 "Power Analyzer" 0 -1 1768470423119 ""}
|
||||
{ "Warning" "WPAN_PAN_NO_THERMAL_MODEL_SELECTED" "" "No board thermal model was selected. Analyzing without board thermal modeling." { } { } 0 215044 "No board thermal model was selected. Analyzing without board thermal modeling." 0 0 "Power Analyzer" 0 -1 1768470423119 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Power Analyzer" 0 -1 1768470423140 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Power Analyzer" 0 -1 1768470423260 ""}
|
||||
{ "Info" "IPAN_AVG_TOGGLE_RATE_PER_DESIGN" "0.000 millions of transitions / sec " "Average toggle rate for this design is 0.000 millions of transitions / sec" { } { } 0 215049 "Average toggle rate for this design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768470423380 ""}
|
||||
{ "Info" "IPAN_PAN_TOTAL_POWER_ESTIMATION" "72.34 mW " "Total thermal power estimate for the design is 72.34 mW" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "" { Report "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "Compiler" "" "" "" "" { } "PowerPlay Power Analyzer Summary" } } } 0 215031 "Total thermal power estimate for the design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768470423390 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Power Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Power Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "878 " "Peak virtual memory: 878 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768470423443 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 17:47:03 2026 " "Processing ended: Thu Jan 15 17:47:03 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768470423443 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768470423443 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768470423443 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Power Analyzer" 0 -1 1768470423443 ""}
|
||||
二进制
Exp4Displayer/db/Exp4.pplq.rdb
普通文件
二进制
Exp4Displayer/db/Exp4.pplq.rdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.pre_map.hdb
普通文件
二进制
Exp4Displayer/db/Exp4.pre_map.hdb
普通文件
二进制文件未显示。
@ -0,0 +1,27 @@
|
||||
-- begin_signature
|
||||
-- Exp4
|
||||
-- end_signature
|
||||
WIDTH=9;
|
||||
DEPTH=16;
|
||||
|
||||
ADDRESS_RADIX=UNS;
|
||||
DATA_RADIX=BIN;
|
||||
|
||||
CONTENT BEGIN
|
||||
15 : 001110001;
|
||||
14 : 001111001;
|
||||
13 : 001011110;
|
||||
12 : 000111001;
|
||||
11 : 001111100;
|
||||
10 : 001110111;
|
||||
9 : 001101111;
|
||||
8 : 001111111;
|
||||
7 : 000000111;
|
||||
6 : 001111101;
|
||||
5 : 001101101;
|
||||
4 : 001100110;
|
||||
3 : 001001111;
|
||||
2 : XXXXXXXXX;
|
||||
1 : 000000110;
|
||||
0 : 000111111;
|
||||
END;
|
||||
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.routing.rdb
普通文件
二进制
Exp4Displayer/db/Exp4.routing.rdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.rtlv.hdb
普通文件
二进制
Exp4Displayer/db/Exp4.rtlv.hdb
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.rtlv_sg.cdb
普通文件
二进制
Exp4Displayer/db/Exp4.rtlv_sg.cdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.sgate.nvd
普通文件
二进制
Exp4Displayer/db/Exp4.sgate.nvd
普通文件
二进制文件未显示。
二进制
Exp4Displayer/db/Exp4.sgate_sm.nvd
普通文件
二进制
Exp4Displayer/db/Exp4.sgate_sm.nvd
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1 @@
|
||||
DONE
|
||||
50
Exp4Displayer/db/Exp4.sta.qmsg
普通文件
50
Exp4Displayer/db/Exp4.sta.qmsg
普通文件
@ -0,0 +1,50 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768470424309 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768470424310 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 17:47:04 2026 " "Processing started: Thu Jan 15 17:47:04 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768470424310 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1768470424310 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta Exp4 -c Exp4 " "Command: quartus_sta Exp4 -c Exp4" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1768470424310 ""}
|
||||
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1768470424326 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1768470424368 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1768470424368 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768470424382 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768470424382 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Exp4.sdc " "Synopsys Design Constraints File file not found: 'Exp4.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1768470424423 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768470424423 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768470424423 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768470424423 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1768470424423 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768470424423 ""}
|
||||
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1768470424424 ""}
|
||||
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1768470424425 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV 100C Model" { } { } 0 0 "Analyzing Slow 1200mV 100C Model" 0 0 "Timing Analyzer" 0 0 1768470424425 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424426 ""}
|
||||
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1768470424426 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424427 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424427 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424427 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424428 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424428 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV -40C Model" { } { } 0 0 "Analyzing Slow 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768470424428 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1768470424437 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1768470424558 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768470424572 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768470424572 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768470424572 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768470424572 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424572 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424573 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424573 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424573 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424573 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424574 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1200mV -40C Model" { } { } 0 0 "Analyzing Fast 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768470424574 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768470424618 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768470424618 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768470424618 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768470424618 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424619 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424619 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424619 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424620 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470424620 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768470425019 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768470425019 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "596 " "Peak virtual memory: 596 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768470425027 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 17:47:05 2026 " "Processing ended: Thu Jan 15 17:47:05 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768470425027 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768470425027 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768470425027 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1768470425027 ""}
|
||||
二进制
Exp4Displayer/db/Exp4.sta.rdb
普通文件
二进制
Exp4Displayer/db/Exp4.sta.rdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1,4 @@
|
||||
start_full_compilation:s
|
||||
start_assembler:s-start_full_compilation
|
||||
start_timing_analyzer:s-start_full_compilation
|
||||
start_eda_netlist_writer:s-start_full_compilation
|
||||
二进制
Exp4Displayer/db/Exp4.vpr.ammdb
普通文件
二进制
Exp4Displayer/db/Exp4.vpr.ammdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1,81 @@
|
||||
{
|
||||
"partitions" : [
|
||||
{
|
||||
"name" : "Top",
|
||||
"pins" : [
|
||||
{
|
||||
"name" : "segment_led_1[8]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_1[7]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_1[6]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_1[5]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_1[4]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_1[3]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_1[2]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_2[8]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_2[7]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_2[6]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_2[5]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_2[4]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_2[3]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "segment_led_2[2]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "seg_data_1[3]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "seg_data_1[2]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "seg_data_1[1]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "seg_data_1[0]",
|
||||
"strict" : false
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
}
|
||||
166
Exp4Displayer/db/prev_cmp_Exp4.qmsg
普通文件
166
Exp4Displayer/db/prev_cmp_Exp4.qmsg
普通文件
@ -0,0 +1,166 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768470360256 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768470360256 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 17:46:00 2026 " "Processing started: Thu Jan 15 17:46:00 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768470360256 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768470360256 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off Exp4 -c Exp4 " "Command: quartus_map --read_settings_files=on --write_settings_files=off Exp4 -c Exp4" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768470360256 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1768470360343 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1768470360343 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Seg.v 1 1 " "Found 1 design units, including 1 entities, in source file Seg.v" { { "Info" "ISGN_ENTITY_NAME" "1 Exp4 " "Found entity 1: Exp4" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768470363903 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768470363903 ""}
|
||||
{ "Warning" "WVRFX_L2_VERI_CREATED_IMPLICIT_NET" "segment_led_2 Seg.v(28) " "Verilog HDL Implicit Net warning at Seg.v(28): created implicit net for \"segment_led_2\"" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 28 0 0 } } } 0 10236 "Verilog HDL Implicit Net warning at %2!s!: created implicit net for \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768470363904 ""}
|
||||
{ "Info" "ISGN_START_ELABORATION_TOP" "Exp4 " "Elaborating entity \"Exp4\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1768470363923 ""}
|
||||
{ "Warning" "WVRFX_L2_HDL_OBJECT_ASSIGNED_NOT_READ" "segment_led_2 Seg.v(28) " "Verilog HDL or VHDL warning at Seg.v(28): object \"segment_led_2\" assigned a value but never read" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 28 0 0 } } } 0 10036 "Verilog HDL or VHDL warning at %2!s!: object \"%1!s!\" assigned a value but never read" 0 0 "Analysis & Synthesis" 0 -1 1768470363924 "|Exp4"}
|
||||
{ "Warning" "WVRFX_L2_VERI_EXPRESSION_TRUNCATED_TO_FIT" "9 1 Seg.v(28) " "Verilog HDL assignment warning at Seg.v(28): truncated value with size 9 to match size of target (1)" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 28 0 0 } } } 0 10230 "Verilog HDL assignment warning at %3!s!: truncated value with size %1!d! to match size of target (%2!d!)" 0 0 "Analysis & Synthesis" 0 -1 1768470363925 "|Exp4"}
|
||||
{ "Warning" "WVRFX_VDB_DRIVERLESS_NET" "seg.data_a 0 Seg.v(8) " "Net \"seg.data_a\" at Seg.v(8) has no driver or initial value, using a default initial value '0'" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 8 0 0 } } } 0 10030 "Net \"%1!s!\" at %3!s! has no driver or initial value, using a default initial value '%2!c!'" 0 0 "Analysis & Synthesis" 0 -1 1768470363925 "|Exp4"}
|
||||
{ "Warning" "WVRFX_VDB_DRIVERLESS_NET" "seg.waddr_a 0 Seg.v(8) " "Net \"seg.waddr_a\" at Seg.v(8) has no driver or initial value, using a default initial value '0'" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 8 0 0 } } } 0 10030 "Net \"%1!s!\" at %3!s! has no driver or initial value, using a default initial value '%2!c!'" 0 0 "Analysis & Synthesis" 0 -1 1768470363925 "|Exp4"}
|
||||
{ "Warning" "WVRFX_VDB_DRIVERLESS_NET" "seg.we_a 0 Seg.v(8) " "Net \"seg.we_a\" at Seg.v(8) has no driver or initial value, using a default initial value '0'" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 8 0 0 } } } 0 10030 "Net \"%1!s!\" at %3!s! has no driver or initial value, using a default initial value '%2!c!'" 0 0 "Analysis & Synthesis" 0 -1 1768470363925 "|Exp4"}
|
||||
{ "Warning" "WCDB_CDB_RAM_MIF_CONTAIN_DONT_CARE" "/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif " "Memory Initialization File or Hexadecimal (Intel-Format) File \"/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif\" contains \"don't care\" values -- overwriting them with 0s" { } { } 0 127007 "Memory Initialization File or Hexadecimal (Intel-Format) File \"%1!s!\" contains \"don't care\" values -- overwriting them with 0s" 0 0 "Analysis & Synthesis" 0 -1 1768470363981 ""}
|
||||
{ "Warning" "WCDB_CDB_RAM_MIF_CONTAIN_DONT_CARE" "/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif " "Memory Initialization File or Hexadecimal (Intel-Format) File \"/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif\" contains \"don't care\" values -- overwriting them with 0s" { } { } 0 127007 "Memory Initialization File or Hexadecimal (Intel-Format) File \"%1!s!\" contains \"don't care\" values -- overwriting them with 0s" 0 0 "Analysis & Synthesis" 0 -1 1768470363981 ""}
|
||||
{ "Warning" "WCDB_CDB_RAM_MIF_CONTAIN_DONT_CARE" "/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif " "Memory Initialization File or Hexadecimal (Intel-Format) File \"/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif\" contains \"don't care\" values -- overwriting them with 0s" { } { } 0 127007 "Memory Initialization File or Hexadecimal (Intel-Format) File \"%1!s!\" contains \"don't care\" values -- overwriting them with 0s" 0 0 "Analysis & Synthesis" 0 -1 1768470363981 ""}
|
||||
{ "Info" "IINFER_UNINFERRED_RAM_SUMMARY" "1 " "Found 1 instances of uninferred RAM logic" { { "Info" "IINFER_MIF_NOT_SUPPORTED_FOR_HARDCOPY" "seg " "RAM logic \"seg\" is uninferred because MIF is not supported for the selected family" { } { { "Seg.v" "seg" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 8 -1 0 } } } 0 276013 "RAM logic \"%1!s!\" is uninferred because MIF is not supported for the selected family" 0 0 "Design Software" 0 -1 1768470363987 ""} } { } 0 276014 "Found %1!d! instances of uninferred RAM logic" 0 0 "Analysis & Synthesis" 0 -1 1768470363987 ""}
|
||||
{ "Warning" "WCDB_CDB_RAM_MIF_CONTAIN_DONT_CARE" "/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif " "Memory Initialization File or Hexadecimal (Intel-Format) File \"/home/lanshuye/Projects/DCExp/Exp4Displayer/db/Exp4.ram0_Exp4_264a7a.hdl.mif\" contains \"don't care\" values -- overwriting them with 0s" { } { } 0 127007 "Memory Initialization File or Hexadecimal (Intel-Format) File \"%1!s!\" contains \"don't care\" values -- overwriting them with 0s" 0 0 "Analysis & Synthesis" 0 -1 1768470363994 ""}
|
||||
{ "Warning" "WMLS_MLS_STUCK_PIN_HDR" "" "Output pins are stuck at VCC or GND" { { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_1\[1\] GND " "Pin \"segment_led_1\[1\]\" is stuck at GND" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768470364058 "|Exp4|segment_led_1[1]"} { "Warning" "WMLS_MLS_STUCK_PIN" "segment_led_1\[0\] GND " "Pin \"segment_led_1\[0\]\" is stuck at GND" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 7 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768470364058 "|Exp4|segment_led_1[0]"} } { } 0 13024 "Output pins are stuck at VCC or GND" 0 0 "Analysis & Synthesis" 0 -1 1768470364058 ""}
|
||||
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1768470364078 ""}
|
||||
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1768470364247 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768470364247 ""}
|
||||
{ "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN_HDR" "4 " "Design contains 4 input pin(s) that do not drive logic" { { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "seg_data_2\[0\] " "No output dependent on input pin \"seg_data_2\[0\]\"" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 4 0 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1768470364258 "|Exp4|seg_data_2[0]"} { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "seg_data_2\[1\] " "No output dependent on input pin \"seg_data_2\[1\]\"" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 4 0 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1768470364258 "|Exp4|seg_data_2[1]"} { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "seg_data_2\[2\] " "No output dependent on input pin \"seg_data_2\[2\]\"" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 4 0 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1768470364258 "|Exp4|seg_data_2[2]"} { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "seg_data_2\[3\] " "No output dependent on input pin \"seg_data_2\[3\]\"" { } { { "Seg.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp4Displayer/Seg.v" 4 0 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1768470364258 "|Exp4|seg_data_2[3]"} } { } 0 21074 "Design contains %1!d! input pin(s) that do not drive logic" 0 0 "Analysis & Synthesis" 0 -1 1768470364258 ""}
|
||||
{ "Info" "ICUT_CUT_TM_SUMMARY" "24 " "Implemented 24 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "8 " "Implemented 8 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1768470364258 ""} { "Info" "ICUT_CUT_TM_OPINS" "9 " "Implemented 9 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1768470364258 ""} { "Info" "ICUT_CUT_TM_LCELLS" "7 " "Implemented 7 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1768470364258 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1768470364258 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 19 s Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 19 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "412 " "Peak virtual memory: 412 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768470364261 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 17:46:04 2026 " "Processing ended: Thu Jan 15 17:46:04 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768470364261 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768470364261 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:13 " "Total CPU time (on all processors): 00:00:13" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768470364261 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768470364261 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Analysis & Synthesis" 0 -1 1768470365217 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus Prime " "Running Quartus Prime Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768470365218 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 17:46:05 2026 " "Processing started: Thu Jan 15 17:46:05 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768470365218 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Fitter" 0 -1 1768470365218 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off Exp4 -c Exp4 " "Command: quartus_fit --read_settings_files=off --write_settings_files=off Exp4 -c Exp4" { } { } 0 0 "Command: %1!s!" 0 0 "Fitter" 0 -1 1768470365218 ""}
|
||||
{ "Info" "0" "" "qfit2_default_script.tcl version: #1" { } { } 0 0 "qfit2_default_script.tcl version: #1" 0 0 "Fitter" 0 0 1768470365232 ""}
|
||||
{ "Info" "0" "" "Project = Exp4" { } { } 0 0 "Project = Exp4" 0 0 "Fitter" 0 0 1768470365233 ""}
|
||||
{ "Info" "0" "" "Revision = Exp4" { } { } 0 0 "Revision = Exp4" 0 0 "Fitter" 0 0 1768470365233 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1768470365275 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1768470365275 ""}
|
||||
{ "Info" "IMPP_MPP_USER_DEVICE" "Exp4 10M02SCM153I7G " "Selected device 10M02SCM153I7G for design \"Exp4\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1768470365278 ""}
|
||||
{ "Info" "IMPP_MPP_BOOT_SEL_PIN_NOT_RESERVED" "" "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." { } { } 0 22896 "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." 0 0 "Fitter" 0 -1 1768470365304 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768470365304 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768470365304 ""}
|
||||
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1768470365344 ""}
|
||||
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1768470365346 ""}
|
||||
{ "Critical Warning" "WFCUDA_FCUDA_SPS_DEVICE_POWER_LIMITATION" "" "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." { } { } 1 16562 "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." 0 0 "Fitter" 0 -1 1768470365362 ""}
|
||||
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M08SCM153I7G " "Device 10M08SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768470365363 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M04SCM153I7G " "Device 10M04SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768470365363 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1768470365363 ""}
|
||||
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "7 " "Fitter converted 7 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TMS~ G1 " "Pin ~ALTERA_TMS~ is reserved at location G1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TMS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 70 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470365364 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TCK~ J1 " "Pin ~ALTERA_TCK~ is reserved at location J1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TCK~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 72 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470365364 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDI~ H5 " "Pin ~ALTERA_TDI~ is reserved at location H5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDI~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 74 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470365364 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDO~ H4 " "Pin ~ALTERA_TDO~ is reserved at location H4" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDO~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 76 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470365364 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCONFIG~ E8 " "Pin ~ALTERA_nCONFIG~ is reserved at location E8" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nCONFIG~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 78 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470365364 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nSTATUS~ D6 " "Pin ~ALTERA_nSTATUS~ is reserved at location D6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nSTATUS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 80 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470365364 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONF_DONE~ E6 " "Pin ~ALTERA_CONF_DONE~ is reserved at location E6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_CONF_DONE~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 0 { 0 ""} 0 82 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768470365364 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1768470365364 ""}
|
||||
{ "Info" "IFIOMGR_RESERVE_PIN_NO_DATA0" "" "DATA\[0\] dual-purpose pin not reserved" { } { } 0 169141 "DATA\[0\] dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768470365364 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "Data\[1\]/ASDO " "Data\[1\]/ASDO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768470365364 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "nCSO " "nCSO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768470365364 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "DCLK " "DCLK dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768470365364 ""}
|
||||
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1768470365365 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Exp4.sdc " "Synopsys Design Constraints File file not found: 'Exp4.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1768470365512 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1768470365513 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1768470365513 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1768470365513 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1768470365513 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1768470365513 ""}
|
||||
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1768470365513 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1768470365515 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768470365515 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768470365515 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768470365515 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768470365515 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1768470365515 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1768470365515 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1768470365515 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1768470365515 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1768470365515 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1768470365515 ""}
|
||||
{ "Warning" "WCUT_CUT_UNATTACHED_ASGN" "" "Ignored locations or region assignments to the following nodes" { { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "segment_led_2\[0\] " "Node \"segment_led_2\[0\]\" is assigned to location or region, but does not exist in design" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "segment_led_2\[0\]" } } } } } 0 15706 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "Design Software" 0 -1 1768470365519 ""} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "segment_led_2\[1\] " "Node \"segment_led_2\[1\]\" is assigned to location or region, but does not exist in design" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "segment_led_2\[1\]" } } } } } 0 15706 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "Design Software" 0 -1 1768470365519 ""} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "segment_led_2\[2\] " "Node \"segment_led_2\[2\]\" is assigned to location or region, but does not exist in design" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "segment_led_2\[2\]" } } } } } 0 15706 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "Design Software" 0 -1 1768470365519 ""} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "segment_led_2\[3\] " "Node \"segment_led_2\[3\]\" is assigned to location or region, but does not exist in design" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "segment_led_2\[3\]" } } } } } 0 15706 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "Design Software" 0 -1 1768470365519 ""} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "segment_led_2\[4\] " "Node \"segment_led_2\[4\]\" is assigned to location or region, but does not exist in design" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "segment_led_2\[4\]" } } } } } 0 15706 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "Design Software" 0 -1 1768470365519 ""} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "segment_led_2\[5\] " "Node \"segment_led_2\[5\]\" is assigned to location or region, but does not exist in design" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "segment_led_2\[5\]" } } } } } 0 15706 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "Design Software" 0 -1 1768470365519 ""} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "segment_led_2\[6\] " "Node \"segment_led_2\[6\]\" is assigned to location or region, but does not exist in design" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "segment_led_2\[6\]" } } } } } 0 15706 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "Design Software" 0 -1 1768470365519 ""} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "segment_led_2\[7\] " "Node \"segment_led_2\[7\]\" is assigned to location or region, but does not exist in design" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "segment_led_2\[7\]" } } } } } 0 15706 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "Design Software" 0 -1 1768470365519 ""} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "segment_led_2\[8\] " "Node \"segment_led_2\[8\]\" is assigned to location or region, but does not exist in design" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "segment_led_2\[8\]" } } } } } 0 15706 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "Design Software" 0 -1 1768470365519 ""} } { } 0 15705 "Ignored locations or region assignments to the following nodes" 0 0 "Fitter" 0 -1 1768470365519 ""}
|
||||
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768470365519 ""}
|
||||
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1768470365520 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1768470365735 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768470365745 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1768470365749 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1768470365784 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768470365784 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1768470366015 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X9_Y9 X18_Y17 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y9 to location X18_Y17" { } { { "loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp4Displayer/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y9 to location X18_Y17"} { { 12 { 0 ""} 9 9 10 9 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1768470366087 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1768470366087 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1768470366096 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1768470366096 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1768470366096 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768470366097 ""}
|
||||
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.01 " "Total time spent on timing analysis during the Fitter is 0.01 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1768470366182 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768470366186 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768470366300 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768470366300 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768470366405 ""}
|
||||
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768470366602 ""}
|
||||
{ "Warning" "WFITCC_FITCC_IGNORED_ASSIGNMENT" "" "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." { } { } 0 171167 "Found invalid Fitter assignments. See the Ignored Assignments panel in the Fitter Compilation Report for more information." 0 0 "Fitter" 0 -1 1768470366629 ""}
|
||||
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "/home/lanshuye/Projects/DCExp/Exp4Displayer/output_files/Exp4.fit.smsg " "Generated suppressed messages file /home/lanshuye/Projects/DCExp/Exp4Displayer/output_files/Exp4.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1768470366640 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 17 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 17 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1746 " "Peak virtual memory: 1746 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768470366754 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 17:46:06 2026 " "Processing ended: Thu Jan 15 17:46:06 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768470366754 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768470366754 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:02 " "Total CPU time (on all processors): 00:00:02" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768470366754 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1768470366754 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Fitter" 0 -1 1768470367650 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768470367650 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 17:46:07 2026 " "Processing started: Thu Jan 15 17:46:07 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768470367650 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1768470367650 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off Exp4 -c Exp4 " "Command: quartus_asm --read_settings_files=off --write_settings_files=off Exp4 -c Exp4" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1768470367651 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1768470367724 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1768470367780 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1768470367783 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "336 " "Peak virtual memory: 336 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768470367869 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 17:46:07 2026 " "Processing ended: Thu Jan 15 17:46:07 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768470367869 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768470367869 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768470367869 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1768470367869 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Assembler" 0 -1 1768470368784 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Power Analyzer Quartus Prime " "Running Quartus Prime Power Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768470368784 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 17:46:08 2026 " "Processing started: Thu Jan 15 17:46:08 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768470368784 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Power Analyzer" 0 -1 1768470368784 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_pow --read_settings_files=off --write_settings_files=off Exp4 -c Exp4 " "Command: quartus_pow --read_settings_files=off --write_settings_files=off Exp4 -c Exp4" { } { } 0 0 "Command: %1!s!" 0 0 "Power Analyzer" 0 -1 1768470368784 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Power Analyzer" 0 -1 1768470368867 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768470368869 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768470368869 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Exp4.sdc " "Synopsys Design Constraints File file not found: 'Exp4.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Power Analyzer" 0 -1 1768470369000 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Power Analyzer" 0 -1 1768470369000 ""}
|
||||
{ "Info" "IPVA_PVA_START_CALCULATION" "" "Starting Vectorless Power Activity Estimation" { } { } 0 223000 "Starting Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768470369003 ""}
|
||||
{ "Warning" "WPUTIL_PUTIL_NO_CLK_DOMAINS_FOUND" "" "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" { } { } 0 222013 "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" 0 0 "Power Analyzer" 0 -1 1768470369003 ""}
|
||||
{ "Info" "IPVA_PVA_END_CALCULATION" "" "Completed Vectorless Power Activity Estimation" { } { } 0 223001 "Completed Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768470369003 ""}
|
||||
{ "Info" "IPATFAM_USING_ADVANCED_IO_POWER" "" "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" { } { } 0 218000 "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" 0 0 "Power Analyzer" 0 -1 1768470369124 ""}
|
||||
{ "Warning" "WPAN_PAN_NO_THERMAL_MODEL_SELECTED" "" "No board thermal model was selected. Analyzing without board thermal modeling." { } { } 0 215044 "No board thermal model was selected. Analyzing without board thermal modeling." 0 0 "Power Analyzer" 0 -1 1768470369125 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Power Analyzer" 0 -1 1768470369144 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Power Analyzer" 0 -1 1768470369262 ""}
|
||||
{ "Info" "IPAN_AVG_TOGGLE_RATE_PER_DESIGN" "0.000 millions of transitions / sec " "Average toggle rate for this design is 0.000 millions of transitions / sec" { } { } 0 215049 "Average toggle rate for this design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768470369370 ""}
|
||||
{ "Info" "IPAN_PAN_TOTAL_POWER_ESTIMATION" "72.30 mW " "Total thermal power estimate for the design is 72.30 mW" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "" { Report "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "Compiler" "" "" "" "" { } "PowerPlay Power Analyzer Summary" } } } 0 215031 "Total thermal power estimate for the design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768470369381 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Power Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Power Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "889 " "Peak virtual memory: 889 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768470369432 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 17:46:09 2026 " "Processing ended: Thu Jan 15 17:46:09 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768470369432 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768470369432 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768470369432 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Power Analyzer" 0 -1 1768470369432 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Power Analyzer" 0 -1 1768470370310 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768470370310 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 17:46:10 2026 " "Processing started: Thu Jan 15 17:46:10 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768470370310 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1768470370310 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta Exp4 -c Exp4 " "Command: quartus_sta Exp4 -c Exp4" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1768470370310 ""}
|
||||
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1768470370326 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1768470370369 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1768470370369 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768470370382 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768470370382 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Exp4.sdc " "Synopsys Design Constraints File file not found: 'Exp4.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1768470370423 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768470370423 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768470370423 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768470370423 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1768470370423 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768470370423 ""}
|
||||
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1768470370424 ""}
|
||||
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1768470370425 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV 100C Model" { } { } 0 0 "Analyzing Slow 1200mV 100C Model" 0 0 "Timing Analyzer" 0 0 1768470370425 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370426 ""}
|
||||
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1768470370426 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370427 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370427 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370427 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370427 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370428 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV -40C Model" { } { } 0 0 "Analyzing Slow 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768470370428 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1768470370437 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1768470370547 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768470370558 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768470370558 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768470370558 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768470370558 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370559 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370560 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370560 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370561 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370561 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370561 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1200mV -40C Model" { } { } 0 0 "Analyzing Fast 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768470370561 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768470370605 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768470370605 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768470370605 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768470370605 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370605 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370606 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370606 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370607 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768470370607 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768470371002 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768470371002 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "573 " "Peak virtual memory: 573 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768470371009 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 17:46:11 2026 " "Processing ended: Thu Jan 15 17:46:11 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768470371009 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768470371009 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768470371009 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1768470371009 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Timing Analyzer" 0 -1 1768470371918 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768470371918 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 17:46:11 2026 " "Processing started: Thu Jan 15 17:46:11 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768470371918 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768470371918 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off Exp4 -c Exp4 " "Command: quartus_eda --read_settings_files=off --write_settings_files=off Exp4 -c Exp4" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768470371918 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1768470372006 ""}
|
||||
{ "Info" "IWSC_DONE_HDL_GENERATION" "Exp4.vo /home/lanshuye/Projects/DCExp/Exp4Displayer/simulation/questa/ simulation " "Generated file Exp4.vo in folder \"/home/lanshuye/Projects/DCExp/Exp4Displayer/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1768470372030 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "583 " "Peak virtual memory: 583 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768470372035 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 17:46:12 2026 " "Processing ended: Thu Jan 15 17:46:12 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768470372035 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768470372035 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768470372035 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768470372035 ""}
|
||||
{ "Info" "IFLOW_ERROR_COUNT" "Full Compilation 0 s 48 s " "Quartus Prime Full Compilation was successful. 0 errors, 48 warnings" { } { } 0 293000 "Quartus Prime %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768470372608 ""}
|
||||
在新工单中引用
屏蔽一个用户