first commit
这个提交包含在:
二进制
Exp3Decoder38/db/.cmp.kpt
普通文件
二进制
Exp3Decoder38/db/.cmp.kpt
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1,7 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768465683891 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768465683891 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 16:28:03 2026 " "Processing started: Thu Jan 15 16:28:03 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768465683891 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1768465683891 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38 " "Command: quartus_asm --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1768465683891 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1768465683964 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1768465684027 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1768465684030 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "336 " "Peak virtual memory: 336 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465684102 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:28:04 2026 " "Processing ended: Thu Jan 15 16:28:04 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465684102 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465684102 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465684102 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1768465684102 ""}
|
||||
二进制
Exp3Decoder38/db/Decoder38.asm.rdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.asm.rdb
普通文件
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1,5 @@
|
||||
<?xml version="1.0" ?>
|
||||
<LOG_ROOT>
|
||||
<PROJECT NAME="Decoder38">
|
||||
</PROJECT>
|
||||
</LOG_ROOT>
|
||||
二进制
Exp3Decoder38/db/Decoder38.cmp.bpm
普通文件
二进制
Exp3Decoder38/db/Decoder38.cmp.bpm
普通文件
二进制文件未显示。
二进制
Exp3Decoder38/db/Decoder38.cmp.cdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.cmp.cdb
普通文件
二进制文件未显示。
二进制
Exp3Decoder38/db/Decoder38.cmp.hdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.cmp.hdb
普通文件
二进制文件未显示。
二进制
Exp3Decoder38/db/Decoder38.cmp.idb
普通文件
二进制
Exp3Decoder38/db/Decoder38.cmp.idb
普通文件
二进制文件未显示。
@ -0,0 +1,52 @@
|
||||
v1
|
||||
IO_RULES,NUM_CLKS_NOT_EXCEED_CLKS_AVAILABLE,INAPPLICABLE,IO_000002,Capacity Checks,Number of clocks in an I/O bank should not exceed the number of clocks available.,Critical,No Global Signal assignments found.,,I/O,,
|
||||
IO_RULES,NUM_PINS_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000001,Capacity Checks,Number of pins in an I/O bank should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,NUM_VREF_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000003,Capacity Checks,Number of pins in a Vrefgroup should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,IO_BANK_SUPPORT_VCCIO,INAPPLICABLE,IO_000004,Voltage Compatibility Checks,The I/O bank should support the requested VCCIO.,Critical,No IOBANK_VCCIO assignments found.,,I/O,,
|
||||
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VREF,INAPPLICABLE,IO_000005,Voltage Compatibility Checks,The I/O bank should not have competing VREF values.,Critical,No VREF I/O Standard assignments found.,,I/O,,
|
||||
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VCCIO,PASS,IO_000006,Voltage Compatibility Checks,The I/O bank should not have competing VCCIO values.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,CHECK_UNAVAILABLE_LOC,PASS,IO_000007,Valid Location Checks,Checks for unavailable locations.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,CHECK_RESERVED_LOC,INAPPLICABLE,IO_000008,Valid Location Checks,Checks for reserved locations.,Critical,No reserved LogicLock region found.,,I/O,,
|
||||
IO_RULES,OCT_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000047,I/O Properties Checks for One I/O,On Chip Termination and Slew Rate should not be used at the same time.,Critical,No Slew Rate assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000046,I/O Properties Checks for One I/O,The location should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000045,I/O Properties Checks for One I/O,The I/O standard should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
|
||||
IO_RULES,WEAK_PULL_UP_AND_BUS_HOLD_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000027,I/O Properties Checks for One I/O,Weak Pull Up and Bus Hold should not be used at the same time.,Critical,No Enable Bus-Hold Circuitry or Weak Pull-Up Resistor assignments found.,,I/O,,
|
||||
IO_RULES,OCT_AND_CURRENT_STRENGTH_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000026,I/O Properties Checks for One I/O,On Chip Termination and Current Strength should not be used at the same time.,Critical,No Current Strength or Termination assignments found.,,I/O,,
|
||||
IO_RULES,IO_DIR_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000024,I/O Properties Checks for One I/O,The I/O direction should support the On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_OPEN_DRAIN_VALUE,INAPPLICABLE,IO_000023,I/O Properties Checks for One I/O,The I/O standard should support the Open Drain value.,Critical,No open drain assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000022,I/O Properties Checks for One I/O,The I/O standard should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000021,I/O Properties Checks for One I/O,The I/O standard should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_PCI_CLAMP_DIODE,PASS,IO_000020,I/O Properties Checks for One I/O,The I/O standard should support the requested PCI Clamp Diode.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000019,I/O Properties Checks for One I/O,The I/O standard should support the requested On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
|
||||
IO_RULES,IO_STD_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000018,I/O Properties Checks for One I/O,The I/O standard should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_PCI_CLAMP_DIODE,PASS,IO_000015,I/O Properties Checks for One I/O,The location should support the requested PCI Clamp Diode.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000014,I/O Properties Checks for One I/O,The location should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000013,I/O Properties Checks for One I/O,The location should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000012,I/O Properties Checks for One I/O,The location should support the requested On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000011,I/O Properties Checks for One I/O,The location should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_IO_DIR,PASS,IO_000010,I/O Properties Checks for One I/O,The location should support the requested I/O direction.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,LOC_SUPPORT_IO_STD,PASS,IO_000009,I/O Properties Checks for One I/O,The location should support the requested I/O standard.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,CURRENT_DENSITY_FOR_CONSECUTIVE_IO_NOT_EXCEED_CURRENT_VALUE,PASS,IO_000033,Electromigration Checks,Current density for consecutive I/Os should not exceed 160mA for row I/Os and 160mA for column I/Os.,Critical,0 such failures found.,,I/O,,
|
||||
IO_RULES,SINGLE_ENDED_OUTPUTS_LAB_ROWS_FROM_DIFF_IO,INAPPLICABLE,IO_000034,SI Related Distance Checks,Single-ended outputs should be 5 LAB row(s) away from a differential I/O.,High,No Differential I/O Standard assignments found.,,I/O,,
|
||||
IO_RULES,MAX_20_OUTPUTS_ALLOWED_IN_VREFGROUP,INAPPLICABLE,IO_000042,SI Related SSO Limit Checks,No more than 20 outputs are allowed in a VREF group when VREF is being read from.,High,No VREF I/O Standard assignments found.,,I/O,,
|
||||
IO_RULES_MATRIX,Pin/Rules,IO_000002;IO_000001;IO_000003;IO_000004;IO_000005;IO_000006;IO_000007;IO_000008;IO_000047;IO_000046;IO_000045;IO_000027;IO_000026;IO_000024;IO_000023;IO_000022;IO_000021;IO_000020;IO_000019;IO_000018;IO_000015;IO_000014;IO_000013;IO_000012;IO_000011;IO_000010;IO_000009;IO_000033;IO_000034;IO_000042,
|
||||
IO_RULES_MATRIX,Total Pass,0;11;11;0;0;11;11;0;0;0;0;0;0;0;0;0;0;3;0;0;3;0;0;0;0;11;11;11;0;0,
|
||||
IO_RULES_MATRIX,Total Unchecked,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
|
||||
IO_RULES_MATRIX,Total Inapplicable,11;0;0;11;11;0;0;11;11;11;11;11;11;11;11;11;11;8;11;11;8;11;11;11;11;0;0;0;11;11,
|
||||
IO_RULES_MATRIX,Total Fail,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
|
||||
IO_RULES_MATRIX,data_out[7],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data_out[6],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data_out[5],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data_out[4],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data_out[3],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data_out[2],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data_out[1],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data_out[0],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data_in[0],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data_in[2],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_MATRIX,data_in[1],Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
|
||||
IO_RULES_SUMMARY,Total I/O Rules,30,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Passed,9,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Failed,0,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Unchecked,0,
|
||||
IO_RULES_SUMMARY,Number of I/O Rules Inapplicable,21,
|
||||
二进制
Exp3Decoder38/db/Decoder38.cmp.rdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.cmp.rdb
普通文件
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1,3 @@
|
||||
Quartus_Version = Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
|
||||
Version_Index = 604268800
|
||||
Creation_Time = Thu Jan 15 16:22:03 2026
|
||||
@ -0,0 +1,6 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768465688069 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768465688069 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 16:28:08 2026 " "Processing started: Thu Jan 15 16:28:08 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768465688069 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768465688069 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38 " "Command: quartus_eda --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768465688069 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1768465688157 ""}
|
||||
{ "Info" "IWSC_DONE_HDL_GENERATION" "Decoder38.vo /home/lanshuye/Projects/DCExp/Exp3Decoder38/simulation/questa/ simulation " "Generated file Decoder38.vo in folder \"/home/lanshuye/Projects/DCExp/Exp3Decoder38/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1768465688179 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "586 " "Peak virtual memory: 586 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465688184 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:28:08 2026 " "Processing ended: Thu Jan 15 16:28:08 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465688184 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465688184 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465688184 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768465688184 ""}
|
||||
@ -0,0 +1,53 @@
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1768465681680 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1768465681680 ""}
|
||||
{ "Info" "IMPP_MPP_USER_DEVICE" "Decoder38 10M02SCM153I7G " "Selected device 10M02SCM153I7G for design \"Decoder38\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1768465681683 ""}
|
||||
{ "Info" "IMPP_MPP_BOOT_SEL_PIN_NOT_RESERVED" "" "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." { } { } 0 22896 "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." 0 0 "Fitter" 0 -1 1768465681698 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768465681699 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768465681699 ""}
|
||||
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1768465681733 ""}
|
||||
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1768465681735 ""}
|
||||
{ "Critical Warning" "WFCUDA_FCUDA_SPS_DEVICE_POWER_LIMITATION" "" "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." { } { } 1 16562 "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." 0 0 "Fitter" 0 -1 1768465681752 ""}
|
||||
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M08SCM153I7G " "Device 10M08SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768465681753 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M04SCM153I7G " "Device 10M04SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768465681753 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1768465681753 ""}
|
||||
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "7 " "Fitter converted 7 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TMS~ G1 " "Pin ~ALTERA_TMS~ is reserved at location G1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TMS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 41 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465681754 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TCK~ J1 " "Pin ~ALTERA_TCK~ is reserved at location J1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TCK~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 43 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465681754 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDI~ H5 " "Pin ~ALTERA_TDI~ is reserved at location H5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDI~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 45 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465681754 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDO~ H4 " "Pin ~ALTERA_TDO~ is reserved at location H4" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDO~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 47 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465681754 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCONFIG~ E8 " "Pin ~ALTERA_nCONFIG~ is reserved at location E8" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nCONFIG~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 49 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465681754 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nSTATUS~ D6 " "Pin ~ALTERA_nSTATUS~ is reserved at location D6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nSTATUS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 51 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465681754 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONF_DONE~ E6 " "Pin ~ALTERA_CONF_DONE~ is reserved at location E6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_CONF_DONE~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 53 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465681754 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1768465681754 ""}
|
||||
{ "Info" "IFIOMGR_RESERVE_PIN_NO_DATA0" "" "DATA\[0\] dual-purpose pin not reserved" { } { } 0 169141 "DATA\[0\] dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768465681754 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "Data\[1\]/ASDO " "Data\[1\]/ASDO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768465681754 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "nCSO " "nCSO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768465681754 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "DCLK " "DCLK dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768465681754 ""}
|
||||
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1768465681754 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Decoder38.sdc " "Synopsys Design Constraints File file not found: 'Decoder38.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1768465681874 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1768465681874 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1768465681874 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1768465681875 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1768465681875 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1768465681875 ""}
|
||||
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1768465681875 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1768465681876 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768465681876 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768465681876 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768465681876 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768465681876 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1768465681877 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1768465681877 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1768465681877 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1768465681877 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1768465681877 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1768465681877 ""}
|
||||
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768465681880 ""}
|
||||
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1768465681881 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1768465682075 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768465682083 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1768465682087 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1768465682122 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768465682122 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1768465682341 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X9_Y0 X18_Y8 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8" { } { { "loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8"} { { 12 { 0 ""} 9 0 10 9 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1768465682413 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1768465682413 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1768465682421 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1768465682421 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1768465682421 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768465682422 ""}
|
||||
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.02 " "Total time spent on timing analysis during the Fitter is 0.02 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1768465682509 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768465682512 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768465682619 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768465682619 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768465682720 ""}
|
||||
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768465682878 ""}
|
||||
{ "Warning" "WFIOMGR_FIOMGR_REFER_APPNOTE_447_TOP_LEVEL" "3 MAX 10 " "3 pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing MAX 10 Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." { { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "data_in\[0\] 3.3-V LVTTL J12 " "Pin data_in\[0\] uses I/O standard 3.3-V LVTTL at J12" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { data_in[0] } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "data_in\[0\]" } } } } { "Decoder38.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp3Decoder38/Decoder38.v" 2 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 7 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768465682894 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "data_in\[2\] 3.3-V LVTTL H12 " "Pin data_in\[2\] uses I/O standard 3.3-V LVTTL at H12" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { data_in[2] } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "data_in\[2\]" } } } } { "Decoder38.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp3Decoder38/Decoder38.v" 2 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 5 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768465682894 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "data_in\[1\] 3.3-V LVTTL H11 " "Pin data_in\[1\] uses I/O standard 3.3-V LVTTL at H11" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { data_in[1] } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "data_in\[1\]" } } } } { "Decoder38.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp3Decoder38/Decoder38.v" 2 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 6 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768465682894 ""} } { } 0 169177 "%1!d! pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing %2!s! Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." 0 0 "Fitter" 0 -1 1768465682894 ""}
|
||||
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "/home/lanshuye/Projects/DCExp/Exp3Decoder38/output_files/Decoder38.fit.smsg " "Generated suppressed messages file /home/lanshuye/Projects/DCExp/Exp3Decoder38/output_files/Decoder38.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1768465682904 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 7 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 7 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1750 " "Peak virtual memory: 1750 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465683020 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:28:03 2026 " "Processing ended: Thu Jan 15 16:28:03 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465683020 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:02 " "Elapsed time: 00:00:02" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465683020 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:02 " "Total CPU time (on all processors): 00:00:02" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465683020 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1768465683020 ""}
|
||||
@ -0,0 +1,35 @@
|
||||
|Decoder38
|
||||
data_in[2] => Equal0.IN2
|
||||
data_in[2] => Equal1.IN0
|
||||
data_in[2] => Equal2.IN2
|
||||
data_in[2] => Equal3.IN1
|
||||
data_in[2] => Equal4.IN2
|
||||
data_in[2] => Equal5.IN1
|
||||
data_in[2] => Equal6.IN2
|
||||
data_in[2] => Equal7.IN2
|
||||
data_in[1] => Equal0.IN1
|
||||
data_in[1] => Equal1.IN2
|
||||
data_in[1] => Equal2.IN0
|
||||
data_in[1] => Equal3.IN0
|
||||
data_in[1] => Equal4.IN1
|
||||
data_in[1] => Equal5.IN2
|
||||
data_in[1] => Equal6.IN1
|
||||
data_in[1] => Equal7.IN1
|
||||
data_in[0] => Equal0.IN0
|
||||
data_in[0] => Equal1.IN1
|
||||
data_in[0] => Equal2.IN1
|
||||
data_in[0] => Equal3.IN2
|
||||
data_in[0] => Equal4.IN0
|
||||
data_in[0] => Equal5.IN0
|
||||
data_in[0] => Equal6.IN0
|
||||
data_in[0] => Equal7.IN0
|
||||
data_out[7] << Equal7.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data_out[6] << Equal6.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data_out[5] << Equal5.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data_out[4] << Equal4.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data_out[3] << Equal3.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data_out[2] << Equal2.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data_out[1] << Equal1.DB_MAX_OUTPUT_PORT_TYPE
|
||||
data_out[0] << Equal0.DB_MAX_OUTPUT_PORT_TYPE
|
||||
|
||||
|
||||
二进制
Exp3Decoder38/db/Decoder38.hif
普通文件
二进制
Exp3Decoder38/db/Decoder38.hif
普通文件
二进制文件未显示。
@ -0,0 +1,18 @@
|
||||
<TABLE>
|
||||
<TR bgcolor="#C0C0C0">
|
||||
<TH>Hierarchy</TH>
|
||||
<TH>Input</TH>
|
||||
<TH>Constant Input</TH>
|
||||
<TH>Unused Input</TH>
|
||||
<TH>Floating Input</TH>
|
||||
<TH>Output</TH>
|
||||
<TH>Constant Output</TH>
|
||||
<TH>Unused Output</TH>
|
||||
<TH>Floating Output</TH>
|
||||
<TH>Bidir</TH>
|
||||
<TH>Constant Bidir</TH>
|
||||
<TH>Unused Bidir</TH>
|
||||
<TH>Input only Bidir</TH>
|
||||
<TH>Output only Bidir</TH>
|
||||
</TR>
|
||||
</TABLE>
|
||||
二进制
Exp3Decoder38/db/Decoder38.lpc.rdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.lpc.rdb
普通文件
二进制文件未显示。
@ -0,0 +1,5 @@
|
||||
+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
|
||||
; Legal Partition Candidates ;
|
||||
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+
|
||||
; Hierarchy ; Input ; Constant Input ; Unused Input ; Floating Input ; Output ; Constant Output ; Unused Output ; Floating Output ; Bidir ; Constant Bidir ; Unused Bidir ; Input only Bidir ; Output only Bidir ;
|
||||
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+
|
||||
二进制
Exp3Decoder38/db/Decoder38.map.ammdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.map.ammdb
普通文件
二进制文件未显示。
二进制
Exp3Decoder38/db/Decoder38.map.bpm
普通文件
二进制
Exp3Decoder38/db/Decoder38.map.bpm
普通文件
二进制文件未显示。
二进制
Exp3Decoder38/db/Decoder38.map.cdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.map.cdb
普通文件
二进制文件未显示。
二进制
Exp3Decoder38/db/Decoder38.map.hdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.map.hdb
普通文件
二进制文件未显示。
二进制
Exp3Decoder38/db/Decoder38.map.kpt
普通文件
二进制
Exp3Decoder38/db/Decoder38.map.kpt
普通文件
二进制文件未显示。
@ -0,0 +1 @@
|
||||
v1
|
||||
@ -0,0 +1,11 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768465676674 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768465676674 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 16:27:56 2026 " "Processing started: Thu Jan 15 16:27:56 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768465676674 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768465676674 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off Decoder38 -c Decoder38 " "Command: quartus_map --read_settings_files=on --write_settings_files=off Decoder38 -c Decoder38" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768465676675 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1768465676755 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1768465676755 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Decoder38.v 1 1 " "Found 1 design units, including 1 entities, in source file Decoder38.v" { { "Info" "ISGN_ENTITY_NAME" "1 Decoder38 " "Found entity 1: Decoder38" { } { { "Decoder38.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp3Decoder38/Decoder38.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768465680354 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768465680354 ""}
|
||||
{ "Info" "ISGN_START_ELABORATION_TOP" "Decoder38 " "Elaborating entity \"Decoder38\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1768465680375 ""}
|
||||
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1768465680509 ""}
|
||||
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1768465680638 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768465680638 ""}
|
||||
{ "Info" "ICUT_CUT_TM_SUMMARY" "19 " "Implemented 19 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "3 " "Implemented 3 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1768465680648 ""} { "Info" "ICUT_CUT_TM_OPINS" "8 " "Implemented 8 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1768465680648 ""} { "Info" "ICUT_CUT_TM_LCELLS" "8 " "Implemented 8 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1768465680648 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1768465680648 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "422 " "Peak virtual memory: 422 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465680650 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:28:00 2026 " "Processing ended: Thu Jan 15 16:28:00 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465680650 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465680650 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:13 " "Total CPU time (on all processors): 00:00:13" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465680650 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768465680650 ""}
|
||||
二进制
Exp3Decoder38/db/Decoder38.map.rdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.map.rdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1 @@
|
||||
v1
|
||||
@ -0,0 +1,5 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768465690041 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Netlist Viewers Preprocess Quartus Prime " "Running Quartus Prime Netlist Viewers Preprocess" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768465690041 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 16:28:09 2026 " "Processing started: Thu Jan 15 16:28:09 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768465690041 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Netlist Viewers Preprocess" 0 -1 1768465690041 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_npp Decoder38 -c Decoder38 --netlist_type=sgate " "Command: quartus_npp Decoder38 -c Decoder38 --netlist_type=sgate" { } { } 0 0 "Command: %1!s!" 0 0 "Netlist Viewers Preprocess" 0 -1 1768465690041 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Netlist Viewers Preprocess" 0 -1 1768465690072 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Netlist Viewers Preprocess 0 s 1 Quartus Prime " "Quartus Prime Netlist Viewers Preprocess was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "484 " "Peak virtual memory: 484 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465690074 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:28:10 2026 " "Processing ended: Thu Jan 15 16:28:10 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465690074 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465690074 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465690074 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Netlist Viewers Preprocess" 0 -1 1768465690074 ""}
|
||||
@ -0,0 +1,18 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768465684991 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Power Analyzer Quartus Prime " "Running Quartus Prime Power Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768465684991 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 16:28:04 2026 " "Processing started: Thu Jan 15 16:28:04 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768465684991 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Power Analyzer" 0 -1 1768465684991 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_pow --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38 " "Command: quartus_pow --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38" { } { } 0 0 "Command: %1!s!" 0 0 "Power Analyzer" 0 -1 1768465684991 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Power Analyzer" 0 -1 1768465685065 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768465685068 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768465685068 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Decoder38.sdc " "Synopsys Design Constraints File file not found: 'Decoder38.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Power Analyzer" 0 -1 1768465685192 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Power Analyzer" 0 -1 1768465685192 ""}
|
||||
{ "Info" "IPVA_PVA_START_CALCULATION" "" "Starting Vectorless Power Activity Estimation" { } { } 0 223000 "Starting Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768465685194 ""}
|
||||
{ "Warning" "WPUTIL_PUTIL_NO_CLK_DOMAINS_FOUND" "" "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" { } { } 0 222013 "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" 0 0 "Power Analyzer" 0 -1 1768465685194 ""}
|
||||
{ "Info" "IPVA_PVA_END_CALCULATION" "" "Completed Vectorless Power Activity Estimation" { } { } 0 223001 "Completed Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768465685195 ""}
|
||||
{ "Info" "IPATFAM_USING_ADVANCED_IO_POWER" "" "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" { } { } 0 218000 "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" 0 0 "Power Analyzer" 0 -1 1768465685315 ""}
|
||||
{ "Warning" "WPAN_PAN_NO_THERMAL_MODEL_SELECTED" "" "No board thermal model was selected. Analyzing without board thermal modeling." { } { } 0 215044 "No board thermal model was selected. Analyzing without board thermal modeling." 0 0 "Power Analyzer" 0 -1 1768465685316 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Power Analyzer" 0 -1 1768465685335 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Power Analyzer" 0 -1 1768465685446 ""}
|
||||
{ "Info" "IPAN_AVG_TOGGLE_RATE_PER_DESIGN" "0.000 millions of transitions / sec " "Average toggle rate for this design is 0.000 millions of transitions / sec" { } { } 0 215049 "Average toggle rate for this design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768465685542 ""}
|
||||
{ "Info" "IPAN_PAN_TOTAL_POWER_ESTIMATION" "113.21 mW " "Total thermal power estimate for the design is 113.21 mW" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "" { Report "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "Compiler" "" "" "" "" { } "PowerPlay Power Analyzer Summary" } } } 0 215031 "Total thermal power estimate for the design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768465685552 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Power Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Power Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "905 " "Peak virtual memory: 905 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465685603 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:28:05 2026 " "Processing ended: Thu Jan 15 16:28:05 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465685603 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465685603 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465685603 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Power Analyzer" 0 -1 1768465685603 ""}
|
||||
二进制
Exp3Decoder38/db/Decoder38.pplq.rdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.pplq.rdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制
Exp3Decoder38/db/Decoder38.rtlv.hdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.rtlv.hdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制
Exp3Decoder38/db/Decoder38.sgate.nvd
普通文件
二进制
Exp3Decoder38/db/Decoder38.sgate.nvd
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1 @@
|
||||
DONE
|
||||
@ -0,0 +1,50 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768465686505 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768465686506 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 16:28:06 2026 " "Processing started: Thu Jan 15 16:28:06 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768465686506 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1768465686506 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta Decoder38 -c Decoder38 " "Command: quartus_sta Decoder38 -c Decoder38" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1768465686506 ""}
|
||||
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1768465686522 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1768465686564 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1768465686564 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768465686584 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768465686584 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Decoder38.sdc " "Synopsys Design Constraints File file not found: 'Decoder38.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1768465686627 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768465686627 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768465686627 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768465686627 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1768465686627 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768465686627 ""}
|
||||
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1768465686628 ""}
|
||||
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1768465686629 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV 100C Model" { } { } 0 0 "Analyzing Slow 1200mV 100C Model" 0 0 "Timing Analyzer" 0 0 1768465686629 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686630 ""}
|
||||
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1768465686630 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686630 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686631 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686631 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686631 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686631 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV -40C Model" { } { } 0 0 "Analyzing Slow 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768465686632 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1768465686641 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1768465686757 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768465686767 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768465686767 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768465686767 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768465686767 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686768 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686768 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686768 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686769 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686769 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686769 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1200mV -40C Model" { } { } 0 0 "Analyzing Fast 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768465686770 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768465686816 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768465686816 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768465686816 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768465686816 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686817 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686817 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686817 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686817 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465686818 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768465687190 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768465687190 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "588 " "Peak virtual memory: 588 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465687197 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:28:07 2026 " "Processing ended: Thu Jan 15 16:28:07 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465687197 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465687197 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465687197 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1768465687197 ""}
|
||||
二进制
Exp3Decoder38/db/Decoder38.sta.rdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.sta.rdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制
Exp3Decoder38/db/Decoder38.vpr.ammdb
普通文件
二进制
Exp3Decoder38/db/Decoder38.vpr.ammdb
普通文件
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
二进制文件未显示。
@ -0,0 +1,53 @@
|
||||
{
|
||||
"partitions" : [
|
||||
{
|
||||
"name" : "Top",
|
||||
"pins" : [
|
||||
{
|
||||
"name" : "data_out[7]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data_out[6]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data_out[5]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data_out[4]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data_out[3]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data_out[2]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data_out[1]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data_out[0]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data_in[0]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data_in[2]",
|
||||
"strict" : false
|
||||
},
|
||||
{
|
||||
"name" : "data_in[1]",
|
||||
"strict" : false
|
||||
}
|
||||
]
|
||||
}
|
||||
]
|
||||
}
|
||||
@ -0,0 +1,155 @@
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768465621404 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768465621404 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 16:27:01 2026 " "Processing started: Thu Jan 15 16:27:01 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768465621404 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768465621404 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off Decoder38 -c Decoder38 " "Command: quartus_map --read_settings_files=on --write_settings_files=off Decoder38 -c Decoder38" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768465621404 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1768465621482 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1768465621483 ""}
|
||||
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "Decoder38.v 1 1 " "Found 1 design units, including 1 entities, in source file Decoder38.v" { { "Info" "ISGN_ENTITY_NAME" "1 Decoder38 " "Found entity 1: Decoder38" { } { { "Decoder38.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp3Decoder38/Decoder38.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768465625116 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768465625116 ""}
|
||||
{ "Info" "ISGN_START_ELABORATION_TOP" "Decoder38 " "Elaborating entity \"Decoder38\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1768465625136 ""}
|
||||
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1768465625269 ""}
|
||||
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1768465625402 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768465625402 ""}
|
||||
{ "Info" "ICUT_CUT_TM_SUMMARY" "19 " "Implemented 19 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "3 " "Implemented 3 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1768465625412 ""} { "Info" "ICUT_CUT_TM_OPINS" "8 " "Implemented 8 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1768465625412 ""} { "Info" "ICUT_CUT_TM_LCELLS" "8 " "Implemented 8 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1768465625412 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1768465625412 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1 Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "406 " "Peak virtual memory: 406 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465625414 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:27:05 2026 " "Processing ended: Thu Jan 15 16:27:05 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465625414 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465625414 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:14 " "Total CPU time (on all processors): 00:00:14" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465625414 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768465625414 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Analysis & Synthesis" 0 -1 1768465626367 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus Prime " "Running Quartus Prime Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768465626367 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 16:27:06 2026 " "Processing started: Thu Jan 15 16:27:06 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768465626367 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Fitter" 0 -1 1768465626367 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38 " "Command: quartus_fit --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38" { } { } 0 0 "Command: %1!s!" 0 0 "Fitter" 0 -1 1768465626367 ""}
|
||||
{ "Info" "0" "" "qfit2_default_script.tcl version: #1" { } { } 0 0 "qfit2_default_script.tcl version: #1" 0 0 "Fitter" 0 0 1768465626383 ""}
|
||||
{ "Info" "0" "" "Project = Decoder38" { } { } 0 0 "Project = Decoder38" 0 0 "Fitter" 0 0 1768465626383 ""}
|
||||
{ "Info" "0" "" "Revision = Decoder38" { } { } 0 0 "Revision = Decoder38" 0 0 "Fitter" 0 0 1768465626383 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1768465626422 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1768465626422 ""}
|
||||
{ "Info" "IMPP_MPP_USER_DEVICE" "Decoder38 10M02SCM153I7G " "Selected device 10M02SCM153I7G for design \"Decoder38\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1768465626425 ""}
|
||||
{ "Info" "IMPP_MPP_BOOT_SEL_PIN_NOT_RESERVED" "" "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." { } { } 0 22896 "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." 0 0 "Fitter" 0 -1 1768465626437 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768465626437 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768465626437 ""}
|
||||
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1768465626469 ""}
|
||||
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1768465626471 ""}
|
||||
{ "Critical Warning" "WFCUDA_FCUDA_SPS_DEVICE_POWER_LIMITATION" "" "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." { } { } 1 16562 "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." 0 0 "Fitter" 0 -1 1768465626486 ""}
|
||||
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M08SCM153I7G " "Device 10M08SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768465626487 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M04SCM153I7G " "Device 10M04SCM153I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768465626487 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1768465626487 ""}
|
||||
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "7 " "Fitter converted 7 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TMS~ G1 " "Pin ~ALTERA_TMS~ is reserved at location G1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TMS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 41 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465626488 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TCK~ J1 " "Pin ~ALTERA_TCK~ is reserved at location J1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TCK~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 43 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465626488 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDI~ H5 " "Pin ~ALTERA_TDI~ is reserved at location H5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDI~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 45 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465626488 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDO~ H4 " "Pin ~ALTERA_TDO~ is reserved at location H4" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDO~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 47 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465626488 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCONFIG~ E8 " "Pin ~ALTERA_nCONFIG~ is reserved at location E8" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nCONFIG~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 49 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465626488 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nSTATUS~ D6 " "Pin ~ALTERA_nSTATUS~ is reserved at location D6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nSTATUS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 51 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465626488 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONF_DONE~ E6 " "Pin ~ALTERA_CONF_DONE~ is reserved at location E6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_CONF_DONE~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 53 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768465626488 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1768465626488 ""}
|
||||
{ "Info" "IFIOMGR_RESERVE_PIN_NO_DATA0" "" "DATA\[0\] dual-purpose pin not reserved" { } { } 0 169141 "DATA\[0\] dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768465626489 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "Data\[1\]/ASDO " "Data\[1\]/ASDO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768465626489 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "nCSO " "nCSO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768465626489 ""}
|
||||
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "DCLK " "DCLK dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768465626489 ""}
|
||||
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1768465626489 ""}
|
||||
{ "Critical Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "11 11 " "No exact pin location assignment(s) for 11 pins of 11 total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report." { } { } 1 169085 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report." 0 0 "Fitter" 0 -1 1768465626510 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Decoder38.sdc " "Synopsys Design Constraints File file not found: 'Decoder38.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1768465626610 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1768465626610 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1768465626610 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1768465626610 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1768465626611 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1768465626611 ""}
|
||||
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1768465626611 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1768465626612 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768465626612 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768465626612 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768465626612 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768465626612 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1768465626612 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1768465626612 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1768465626612 ""}
|
||||
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1768465626612 ""}
|
||||
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1768465626612 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1768465626612 ""}
|
||||
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "11 unused 3.3V 3 8 0 " "Number of I/O pins in group: 11 (unused VREF, 3.3V VCCIO, 3 input, 8 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "3.3-V LVTTL. " "I/O standards used: 3.3-V LVTTL." { } { } 0 176212 "I/O standards used: %1!s!" 0 0 "Design Software" 0 -1 1768465626613 ""} } { } 0 176211 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0 "Design Software" 0 -1 1768465626613 ""} } { } 0 176214 "Statistics of %1!s!" 0 0 "Fitter" 0 -1 1768465626613 ""}
|
||||
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1A does not use undetermined 0 8 " "I/O bank number 1A does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 8 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1768465626613 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1B does not use undetermined 4 6 " "I/O bank number 1B does not use VREF pins and has undetermined VCCIO pins. 4 total pin(s) used -- 6 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1768465626613 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use undetermined 0 10 " "I/O bank number 2 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 10 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1768465626613 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use undetermined 0 28 " "I/O bank number 3 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 28 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1768465626613 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "5 does not use undetermined 0 12 " "I/O bank number 5 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 12 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1768465626613 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "6 does not use undetermined 0 16 " "I/O bank number 6 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 16 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1768465626613 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "8 does not use undetermined 3 25 " "I/O bank number 8 does not use VREF pins and has undetermined VCCIO pins. 3 total pin(s) used -- 25 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1768465626613 ""} } { } 0 176214 "Statistics of %1!s!" 0 0 "Design Software" 0 -1 1768465626613 ""} } { } 0 176215 "I/O bank details %1!s! I/O pin placement" 0 0 "Fitter" 0 -1 1768465626613 ""}
|
||||
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768465626616 ""}
|
||||
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1768465626617 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1768465626813 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768465626825 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1768465626830 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1768465626867 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768465626867 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1768465630314 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X0_Y0 X8_Y8 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X0_Y0 to location X8_Y8" { } { { "loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X0_Y0 to location X8_Y8"} { { 12 { 0 ""} 0 0 9 9 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1768465630389 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1768465630389 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1768465630396 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1768465630396 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1768465630396 ""}
|
||||
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768465630396 ""}
|
||||
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.01 " "Total time spent on timing analysis during the Fitter is 0.01 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1768465630484 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768465630488 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768465630593 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768465630593 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768465630692 ""}
|
||||
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:00 " "Fitter post-fit operations ending: elapsed time is 00:00:00" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768465630864 ""}
|
||||
{ "Warning" "WFIOMGR_FIOMGR_REFER_APPNOTE_447_TOP_LEVEL" "3 MAX 10 " "3 pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing MAX 10 Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." { { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "data_in\[0\] 3.3-V LVTTL P12 " "Pin data_in\[0\] uses I/O standard 3.3-V LVTTL at P12" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { data_in[0] } } } { "Decoder38.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp3Decoder38/Decoder38.v" 2 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 7 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768465630885 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "data_in\[2\] 3.3-V LVTTL K5 " "Pin data_in\[2\] uses I/O standard 3.3-V LVTTL at K5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { data_in[2] } } } { "Decoder38.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp3Decoder38/Decoder38.v" 2 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 5 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768465630885 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "data_in\[1\] 3.3-V LVTTL P9 " "Pin data_in\[1\] uses I/O standard 3.3-V LVTTL at P9" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { data_in[1] } } } { "Decoder38.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp3Decoder38/Decoder38.v" 2 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp3Decoder38/" { { 0 { 0 ""} 0 6 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768465630885 ""} } { } 0 169177 "%1!d! pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing %2!s! Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." 0 0 "Fitter" 0 -1 1768465630885 ""}
|
||||
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "/home/lanshuye/Projects/DCExp/Exp3Decoder38/output_files/Decoder38.fit.smsg " "Generated suppressed messages file /home/lanshuye/Projects/DCExp/Exp3Decoder38/output_files/Decoder38.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1768465630897 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 8 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 8 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1756 " "Peak virtual memory: 1756 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465631015 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:27:11 2026 " "Processing ended: Thu Jan 15 16:27:11 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465631015 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:05 " "Elapsed time: 00:00:05" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465631015 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:05 " "Total CPU time (on all processors): 00:00:05" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465631015 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1768465631015 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Fitter" 0 -1 1768465631875 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768465631875 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 16:27:11 2026 " "Processing started: Thu Jan 15 16:27:11 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768465631875 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1768465631875 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38 " "Command: quartus_asm --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1768465631875 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1768465631949 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1768465632006 ""}
|
||||
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1768465632010 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "336 " "Peak virtual memory: 336 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465632081 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:27:12 2026 " "Processing ended: Thu Jan 15 16:27:12 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465632081 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465632081 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465632081 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1768465632081 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Assembler" 0 -1 1768465632920 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Power Analyzer Quartus Prime " "Running Quartus Prime Power Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768465632920 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 16:27:12 2026 " "Processing started: Thu Jan 15 16:27:12 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768465632920 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Power Analyzer" 0 -1 1768465632920 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_pow --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38 " "Command: quartus_pow --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38" { } { } 0 0 "Command: %1!s!" 0 0 "Power Analyzer" 0 -1 1768465632920 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Power Analyzer" 0 -1 1768465632991 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768465632993 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768465632993 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Decoder38.sdc " "Synopsys Design Constraints File file not found: 'Decoder38.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Power Analyzer" 0 -1 1768465633126 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Power Analyzer" 0 -1 1768465633127 ""}
|
||||
{ "Info" "IPVA_PVA_START_CALCULATION" "" "Starting Vectorless Power Activity Estimation" { } { } 0 223000 "Starting Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768465633129 ""}
|
||||
{ "Warning" "WPUTIL_PUTIL_NO_CLK_DOMAINS_FOUND" "" "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" { } { } 0 222013 "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" 0 0 "Power Analyzer" 0 -1 1768465633129 ""}
|
||||
{ "Info" "IPVA_PVA_END_CALCULATION" "" "Completed Vectorless Power Activity Estimation" { } { } 0 223001 "Completed Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768465633130 ""}
|
||||
{ "Info" "IPATFAM_USING_ADVANCED_IO_POWER" "" "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" { } { } 0 218000 "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" 0 0 "Power Analyzer" 0 -1 1768465633247 ""}
|
||||
{ "Warning" "WPAN_PAN_NO_THERMAL_MODEL_SELECTED" "" "No board thermal model was selected. Analyzing without board thermal modeling." { } { } 0 215044 "No board thermal model was selected. Analyzing without board thermal modeling." 0 0 "Power Analyzer" 0 -1 1768465633248 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Power Analyzer" 0 -1 1768465633268 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Power Analyzer" 0 -1 1768465634559 ""}
|
||||
{ "Info" "IPAN_AVG_TOGGLE_RATE_PER_DESIGN" "0.000 millions of transitions / sec " "Average toggle rate for this design is 0.000 millions of transitions / sec" { } { } 0 215049 "Average toggle rate for this design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768465641899 ""}
|
||||
{ "Info" "IPAN_PAN_TOTAL_POWER_ESTIMATION" "113.21 mW " "Total thermal power estimate for the design is 113.21 mW" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "" { Report "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "Compiler" "" "" "" "" { } "PowerPlay Power Analyzer Summary" } } } 0 215031 "Total thermal power estimate for the design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768465641909 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Power Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Power Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "878 " "Peak virtual memory: 878 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465641960 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:27:21 2026 " "Processing ended: Thu Jan 15 16:27:21 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465641960 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:09 " "Elapsed time: 00:00:09" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465641960 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:09 " "Total CPU time (on all processors): 00:00:09" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465641960 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Power Analyzer" 0 -1 1768465641960 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Power Analyzer" 0 -1 1768465642818 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768465642818 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 16:27:22 2026 " "Processing started: Thu Jan 15 16:27:22 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768465642818 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1768465642818 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta Decoder38 -c Decoder38 " "Command: quartus_sta Decoder38 -c Decoder38" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1768465642818 ""}
|
||||
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1768465642833 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1768465642874 ""}
|
||||
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1768465642874 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature -40 degrees C " "Low junction temperature is -40 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768465642887 ""}
|
||||
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 100 degrees C " "High junction temperature is 100 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768465642887 ""}
|
||||
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Decoder38.sdc " "Synopsys Design Constraints File file not found: 'Decoder38.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1768465642929 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768465642929 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768465642929 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768465642929 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1768465642929 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768465642930 ""}
|
||||
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1768465642930 ""}
|
||||
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1768465642931 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV 100C Model" { } { } 0 0 "Analyzing Slow 1200mV 100C Model" 0 0 "Timing Analyzer" 0 0 1768465642931 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465642932 ""}
|
||||
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1768465642933 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465642933 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465642934 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465642934 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465642934 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465642935 ""}
|
||||
{ "Info" "0" "" "Analyzing Slow 1200mV -40C Model" { } { } 0 0 "Analyzing Slow 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768465642936 ""}
|
||||
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1768465642948 ""}
|
||||
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1768465644398 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768465644408 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768465644408 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768465644408 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768465644408 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465644409 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465644409 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465644410 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465644410 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465644410 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465644411 ""}
|
||||
{ "Info" "0" "" "Analyzing Fast 1200mV -40C Model" { } { } 0 0 "Analyzing Fast 1200mV -40C Model" 0 0 "Timing Analyzer" 0 0 1768465644411 ""}
|
||||
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768465644453 ""}
|
||||
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768465644453 ""}
|
||||
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768465644453 ""}
|
||||
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768465644453 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465644454 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465644454 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465644454 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465644455 ""}
|
||||
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768465644455 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768465644838 ""}
|
||||
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768465644838 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "580 " "Peak virtual memory: 580 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465644845 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:27:24 2026 " "Processing ended: Thu Jan 15 16:27:24 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465644845 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:02 " "Elapsed time: 00:00:02" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465644845 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:02 " "Total CPU time (on all processors): 00:00:02" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465644845 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1768465644845 ""}
|
||||
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Timing Analyzer" 0 -1 1768465645720 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768465645720 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 16:27:25 2026 " "Processing started: Thu Jan 15 16:27:25 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768465645720 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768465645720 ""}
|
||||
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38 " "Command: quartus_eda --read_settings_files=off --write_settings_files=off Decoder38 -c Decoder38" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768465645720 ""}
|
||||
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1768465645809 ""}
|
||||
{ "Info" "IWSC_DONE_HDL_GENERATION" "Decoder38.vo /home/lanshuye/Projects/DCExp/Exp3Decoder38/simulation/questa/ simulation " "Generated file Decoder38.vo in folder \"/home/lanshuye/Projects/DCExp/Exp3Decoder38/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1768465645829 ""}
|
||||
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "583 " "Peak virtual memory: 583 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768465645834 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 16:27:25 2026 " "Processing ended: Thu Jan 15 16:27:25 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768465645834 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768465645834 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768465645834 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768465645834 ""}
|
||||
{ "Info" "IFLOW_ERROR_COUNT" "Full Compilation 0 s 21 s " "Quartus Prime Full Compilation was successful. 0 errors, 21 warnings" { } { } 0 293000 "Quartus Prime %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768465646412 ""}
|
||||
在新工单中引用
屏蔽一个用户