first commit

这个提交包含在:
2026-01-15 23:21:38 +08:00
当前提交 1e613835fe
共有 955 个文件被更改,包括 31895 次插入 和 0 次删除

二进制
Exp2Adder/db/.cmp.kpt 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.(0).cnf.cdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.(0).cnf.hdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.ae.hdb 普通文件

二进制文件未显示。

查看文件

@ -0,0 +1,7 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768459744146 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768459744146 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 14:49:04 2026 " "Processing started: Thu Jan 15 14:49:04 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768459744146 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1768459744146 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off ADDer -c ADDer " "Command: quartus_asm --read_settings_files=off --write_settings_files=off ADDer -c ADDer" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1768459744146 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1768459744236 ""}
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1768459744295 ""}
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1768459744298 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "336 " "Peak virtual memory: 336 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768459744400 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 14:49:04 2026 " "Processing ended: Thu Jan 15 14:49:04 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768459744400 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768459744400 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768459744400 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1768459744400 ""}

二进制
Exp2Adder/db/ADDer.asm.rdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.asm_labs.ddb 普通文件

二进制文件未显示。

查看文件

@ -0,0 +1,5 @@
<?xml version="1.0" ?>
<LOG_ROOT>
<PROJECT NAME="ADDer">
</PROJECT>
</LOG_ROOT>

二进制
Exp2Adder/db/ADDer.cmp.bpm 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.cmp.cdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.cmp.hdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.cmp.idb 普通文件

二进制文件未显示。

查看文件

@ -0,0 +1,46 @@
v1
IO_RULES,NUM_CLKS_NOT_EXCEED_CLKS_AVAILABLE,INAPPLICABLE,IO_000002,Capacity Checks,Number of clocks in an I/O bank should not exceed the number of clocks available.,Critical,No Global Signal assignments found.,,I/O,,
IO_RULES,NUM_PINS_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000001,Capacity Checks,Number of pins in an I/O bank should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
IO_RULES,NUM_VREF_NOT_EXCEED_LOC_AVAILABLE,PASS,IO_000003,Capacity Checks,Number of pins in a Vrefgroup should not exceed the number of locations available.,Critical,0 such failures found.,,I/O,,
IO_RULES,IO_BANK_SUPPORT_VCCIO,INAPPLICABLE,IO_000004,Voltage Compatibility Checks,The I/O bank should support the requested VCCIO.,Critical,No IOBANK_VCCIO assignments found.,,I/O,,
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VREF,INAPPLICABLE,IO_000005,Voltage Compatibility Checks,The I/O bank should not have competing VREF values.,Critical,No VREF I/O Standard assignments found.,,I/O,,
IO_RULES,IO_BANK_NOT_HAVE_COMPETING_VCCIO,PASS,IO_000006,Voltage Compatibility Checks,The I/O bank should not have competing VCCIO values.,Critical,0 such failures found.,,I/O,,
IO_RULES,CHECK_UNAVAILABLE_LOC,PASS,IO_000007,Valid Location Checks,Checks for unavailable locations.,Critical,0 such failures found.,,I/O,,
IO_RULES,CHECK_RESERVED_LOC,INAPPLICABLE,IO_000008,Valid Location Checks,Checks for reserved locations.,Critical,No reserved LogicLock region found.,,I/O,,
IO_RULES,OCT_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000047,I/O Properties Checks for One I/O,On Chip Termination and Slew Rate should not be used at the same time.,Critical,No Slew Rate assignments found.,,I/O,,
IO_RULES,LOC_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000046,I/O Properties Checks for One I/O,The location should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORTS_SLEW_RATE,INAPPLICABLE,IO_000045,I/O Properties Checks for One I/O,The I/O standard should support the requested Slew Rate value.,Critical,No Slew Rate assignments found.,,I/O,,
IO_RULES,WEAK_PULL_UP_AND_BUS_HOLD_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000027,I/O Properties Checks for One I/O,Weak Pull Up and Bus Hold should not be used at the same time.,Critical,No Enable Bus-Hold Circuitry or Weak Pull-Up Resistor assignments found.,,I/O,,
IO_RULES,OCT_AND_CURRENT_STRENGTH_NOT_USED_SIMULTANEOUSLY,INAPPLICABLE,IO_000026,I/O Properties Checks for One I/O,On Chip Termination and Current Strength should not be used at the same time.,Critical,No Current Strength or Termination assignments found.,,I/O,,
IO_RULES,IO_DIR_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000024,I/O Properties Checks for One I/O,The I/O direction should support the On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_OPEN_DRAIN_VALUE,INAPPLICABLE,IO_000023,I/O Properties Checks for One I/O,The I/O standard should support the Open Drain value.,Critical,No open drain assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000022,I/O Properties Checks for One I/O,The I/O standard should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000021,I/O Properties Checks for One I/O,The I/O standard should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_PCI_CLAMP_DIODE,PASS,IO_000020,I/O Properties Checks for One I/O,The I/O standard should support the requested PCI Clamp Diode.,Critical,0 such failures found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000019,I/O Properties Checks for One I/O,The I/O standard should support the requested On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
IO_RULES,IO_STD_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000018,I/O Properties Checks for One I/O,The I/O standard should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_PCI_CLAMP_DIODE,PASS,IO_000015,I/O Properties Checks for One I/O,The location should support the requested PCI Clamp Diode.,Critical,0 such failures found.,,I/O,,
IO_RULES,LOC_SUPPORT_WEAK_PULL_UP_VALUE,INAPPLICABLE,IO_000014,I/O Properties Checks for One I/O,The location should support the requested Weak Pull Up value.,Critical,No Weak Pull-Up Resistor assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_BUS_HOLD_VALUE,INAPPLICABLE,IO_000013,I/O Properties Checks for One I/O,The location should support the requested Bus Hold value.,Critical,No Enable Bus-Hold Circuitry assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_OCT_VALUE,INAPPLICABLE,IO_000012,I/O Properties Checks for One I/O,The location should support the requested On Chip Termination value.,Critical,No Termination assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_CURRENT_STRENGTH,INAPPLICABLE,IO_000011,I/O Properties Checks for One I/O,The location should support the requested Current Strength.,Critical,No Current Strength assignments found.,,I/O,,
IO_RULES,LOC_SUPPORT_IO_DIR,PASS,IO_000010,I/O Properties Checks for One I/O,The location should support the requested I/O direction.,Critical,0 such failures found.,,I/O,,
IO_RULES,LOC_SUPPORT_IO_STD,PASS,IO_000009,I/O Properties Checks for One I/O,The location should support the requested I/O standard.,Critical,0 such failures found.,,I/O,,
IO_RULES,CURRENT_DENSITY_FOR_CONSECUTIVE_IO_NOT_EXCEED_CURRENT_VALUE,PASS,IO_000033,Electromigration Checks,Current density for consecutive I/Os should not exceed 160mA for row I/Os and 160mA for column I/Os.,Critical,0 such failures found.,,I/O,,
IO_RULES,SINGLE_ENDED_OUTPUTS_LAB_ROWS_FROM_DIFF_IO,INAPPLICABLE,IO_000034,SI Related Distance Checks,Single-ended outputs should be 5 LAB row(s) away from a differential I/O.,High,No Differential I/O Standard assignments found.,,I/O,,
IO_RULES,MAX_20_OUTPUTS_ALLOWED_IN_VREFGROUP,INAPPLICABLE,IO_000042,SI Related SSO Limit Checks,No more than 20 outputs are allowed in a VREF group when VREF is being read from.,High,No VREF I/O Standard assignments found.,,I/O,,
IO_RULES_MATRIX,Pin/Rules,IO_000002;IO_000001;IO_000003;IO_000004;IO_000005;IO_000006;IO_000007;IO_000008;IO_000047;IO_000046;IO_000045;IO_000027;IO_000026;IO_000024;IO_000023;IO_000022;IO_000021;IO_000020;IO_000019;IO_000018;IO_000015;IO_000014;IO_000013;IO_000012;IO_000011;IO_000010;IO_000009;IO_000033;IO_000034;IO_000042,
IO_RULES_MATRIX,Total Pass,0;5;5;0;0;5;5;0;0;0;0;0;0;0;0;0;0;3;0;0;3;0;0;0;0;5;5;5;0;0,
IO_RULES_MATRIX,Total Unchecked,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
IO_RULES_MATRIX,Total Inapplicable,5;0;0;5;5;0;0;5;5;5;5;5;5;5;5;5;5;2;5;5;2;5;5;5;5;0;0;0;5;5,
IO_RULES_MATRIX,Total Fail,0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0;0,
IO_RULES_MATRIX,sum,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
IO_RULES_MATRIX,cout,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
IO_RULES_MATRIX,a,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
IO_RULES_MATRIX,b,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
IO_RULES_MATRIX,cin,Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Pass;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Pass;Inapplicable;Inapplicable;Inapplicable;Inapplicable;Pass;Pass;Pass;Inapplicable;Inapplicable,
IO_RULES_SUMMARY,Total I/O Rules,30,
IO_RULES_SUMMARY,Number of I/O Rules Passed,9,
IO_RULES_SUMMARY,Number of I/O Rules Failed,0,
IO_RULES_SUMMARY,Number of I/O Rules Unchecked,0,
IO_RULES_SUMMARY,Number of I/O Rules Inapplicable,21,

二进制
Exp2Adder/db/ADDer.cmp.rdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.cmp_merge.kpt 普通文件

二进制文件未显示。

查看文件

@ -0,0 +1,3 @@
Quartus_Version = Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition
Version_Index = 604268800
Creation_Time = Thu Jan 15 14:13:32 2026

查看文件

@ -0,0 +1,6 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768459748614 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768459748614 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 14:49:08 2026 " "Processing started: Thu Jan 15 14:49:08 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768459748614 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768459748614 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off ADDer -c ADDer " "Command: quartus_eda --read_settings_files=off --write_settings_files=off ADDer -c ADDer" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768459748614 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1768459748727 ""}
{ "Info" "IWSC_DONE_HDL_GENERATION" "ADDer.vo /home/lanshuye/Projects/DCExp/Exp2Adder/simulation/questa/ simulation " "Generated file ADDer.vo in folder \"/home/lanshuye/Projects/DCExp/Exp2Adder/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1768459748746 ""}
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "586 " "Peak virtual memory: 586 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768459748751 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 14:49:08 2026 " "Processing ended: Thu Jan 15 14:49:08 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768459748751 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768459748751 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768459748751 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768459748751 ""}

53
Exp2Adder/db/ADDer.fit.qmsg 普通文件
查看文件

@ -0,0 +1,53 @@
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1768459741794 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1768459741794 ""}
{ "Info" "IMPP_MPP_USER_DEVICE" "ADDer 10M02SCM153C8G " "Selected device 10M02SCM153C8G for design \"ADDer\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1768459741798 ""}
{ "Info" "IMPP_MPP_BOOT_SEL_PIN_NOT_RESERVED" "" "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." { } { } 0 22896 "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." 0 0 "Fitter" 0 -1 1768459741812 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768459741813 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768459741813 ""}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1768459741846 ""}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1768459741848 ""}
{ "Critical Warning" "WFCUDA_FCUDA_SPS_DEVICE_POWER_LIMITATION" "" "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." { } { } 1 16562 "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." 0 0 "Fitter" 0 -1 1768459741864 ""}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M08SCM153C8G " "Device 10M08SCM153C8G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768459741865 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M04SCM153C8G " "Device 10M04SCM153C8G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768459741865 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1768459741865 ""}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "7 " "Fitter converted 7 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TMS~ G1 " "Pin ~ALTERA_TMS~ is reserved at location G1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TMS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 20 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459741866 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TCK~ J1 " "Pin ~ALTERA_TCK~ is reserved at location J1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TCK~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 22 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459741866 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDI~ H5 " "Pin ~ALTERA_TDI~ is reserved at location H5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDI~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 24 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459741866 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDO~ H4 " "Pin ~ALTERA_TDO~ is reserved at location H4" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDO~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 26 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459741866 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCONFIG~ E8 " "Pin ~ALTERA_nCONFIG~ is reserved at location E8" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nCONFIG~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 28 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459741866 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nSTATUS~ D6 " "Pin ~ALTERA_nSTATUS~ is reserved at location D6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nSTATUS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 30 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459741866 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONF_DONE~ E6 " "Pin ~ALTERA_CONF_DONE~ is reserved at location E6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_CONF_DONE~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 32 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459741866 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1768459741866 ""}
{ "Info" "IFIOMGR_RESERVE_PIN_NO_DATA0" "" "DATA\[0\] dual-purpose pin not reserved" { } { } 0 169141 "DATA\[0\] dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768459741866 ""}
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "Data\[1\]/ASDO " "Data\[1\]/ASDO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768459741866 ""}
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "nCSO " "nCSO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768459741866 ""}
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "DCLK " "DCLK dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768459741866 ""}
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1768459741867 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "ADDer.sdc " "Synopsys Design Constraints File file not found: 'ADDer.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1768459741980 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1768459741980 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1768459741980 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1768459741980 ""}
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1768459741980 ""}
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1768459741980 ""}
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1768459741981 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1768459741981 ""}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768459741981 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768459741982 ""}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768459741982 ""}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768459741982 ""}
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1768459741982 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1768459741982 ""}
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1768459741982 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1768459741982 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1768459741982 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1768459741982 ""}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768459741984 ""}
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1768459741985 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1768459742189 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768459742199 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1768459742204 ""}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1768459742237 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768459742237 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1768459742460 ""}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X9_Y0 X18_Y8 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8" { } { { "loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8"} { { 12 { 0 ""} 9 0 10 9 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1768459742534 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1768459742534 ""}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1768459742541 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1768459742541 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1768459742541 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768459742542 ""}
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.02 " "Total time spent on timing analysis during the Fitter is 0.02 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1768459742633 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768459742637 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768459742740 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768459742740 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768459742852 ""}
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:01 " "Fitter post-fit operations ending: elapsed time is 00:00:01" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768459743029 ""}
{ "Warning" "WFIOMGR_FIOMGR_REFER_APPNOTE_447_TOP_LEVEL" "3 MAX 10 " "3 pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing MAX 10 Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." { { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "a 3.3-V LVTTL H11 " "Pin a uses I/O standard 3.3-V LVTTL at H11" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { a } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "a" } } } } { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 3 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 5 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768459743057 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "b 3.3-V LVTTL H12 " "Pin b uses I/O standard 3.3-V LVTTL at H12" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { b } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "b" } } } } { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 4 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 6 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768459743057 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "cin 3.3-V LVTTL J12 " "Pin cin uses I/O standard 3.3-V LVTTL at J12" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { cin } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "cin" } } } } { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 5 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 7 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768459743057 ""} } { } 0 169177 "%1!d! pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing %2!s! Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." 0 0 "Fitter" 0 -1 1768459743057 ""}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "/home/lanshuye/Projects/DCExp/Exp2Adder/output_files/ADDer.fit.smsg " "Generated suppressed messages file /home/lanshuye/Projects/DCExp/Exp2Adder/output_files/ADDer.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1768459743069 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 7 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 7 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1746 " "Peak virtual memory: 1746 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768459743228 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 14:49:03 2026 " "Processing ended: Thu Jan 15 14:49:03 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768459743228 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:02 " "Elapsed time: 00:00:02" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768459743228 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:02 " "Total CPU time (on all processors): 00:00:02" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768459743228 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1768459743228 ""}

查看文件

@ -0,0 +1,11 @@
|ADDer
a => sum.IN0
a => cout.IN0
b => sum.IN1
b => cout.IN1
cin => sum.IN1
cin => cout.IN1
sum <= sum.DB_MAX_OUTPUT_PORT_TYPE
cout <= cout.DB_MAX_OUTPUT_PORT_TYPE

二进制
Exp2Adder/db/ADDer.hif 普通文件

二进制文件未显示。

18
Exp2Adder/db/ADDer.lpc.html 普通文件
查看文件

@ -0,0 +1,18 @@
<TABLE>
<TR bgcolor="#C0C0C0">
<TH>Hierarchy</TH>
<TH>Input</TH>
<TH>Constant Input</TH>
<TH>Unused Input</TH>
<TH>Floating Input</TH>
<TH>Output</TH>
<TH>Constant Output</TH>
<TH>Unused Output</TH>
<TH>Floating Output</TH>
<TH>Bidir</TH>
<TH>Constant Bidir</TH>
<TH>Unused Bidir</TH>
<TH>Input only Bidir</TH>
<TH>Output only Bidir</TH>
</TR>
</TABLE>

二进制
Exp2Adder/db/ADDer.lpc.rdb 普通文件

二进制文件未显示。

查看文件

@ -0,0 +1,5 @@
+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
; Legal Partition Candidates ;
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+
; Hierarchy ; Input ; Constant Input ; Unused Input ; Floating Input ; Output ; Constant Output ; Unused Output ; Floating Output ; Bidir ; Constant Bidir ; Unused Bidir ; Input only Bidir ; Output only Bidir ;
+-----------+-------+----------------+--------------+----------------+--------+-----------------+---------------+-----------------+-------+----------------+--------------+------------------+-------------------+

二进制
Exp2Adder/db/ADDer.map.ammdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.map.bpm 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.map.cdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.map.hdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.map.kpt 普通文件

二进制文件未显示。

查看文件

@ -0,0 +1 @@
v1

12
Exp2Adder/db/ADDer.map.qmsg 普通文件
查看文件

@ -0,0 +1,12 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768459736882 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768459736882 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 14:48:56 2026 " "Processing started: Thu Jan 15 14:48:56 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768459736882 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768459736882 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off ADDer -c ADDer " "Command: quartus_map --read_settings_files=on --write_settings_files=off ADDer -c ADDer" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768459736882 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1768459736963 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1768459736963 ""}
{ "Warning" "WSGN_FILE_IS_MISSING" "Verilog3.v " "Can't analyze file -- file Verilog3.v is missing" { } { } 0 12019 "Can't analyze file -- file %1!s! is missing" 0 0 "Analysis & Synthesis" 0 -1 1768459740493 ""}
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "ADDer.v 1 1 " "Found 1 design units, including 1 entities, in source file ADDer.v" { { "Info" "ISGN_ENTITY_NAME" "1 ADDer " "Found entity 1: ADDer" { } { { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768459740494 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768459740494 ""}
{ "Info" "ISGN_START_ELABORATION_TOP" "ADDer " "Elaborating entity \"ADDer\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1768459740514 ""}
{ "Info" "ISUTIL_TIMING_DRIVEN_SYNTHESIS_RUNNING" "" "Timing-Driven Synthesis is running" { } { } 0 286030 "Timing-Driven Synthesis is running" 0 0 "Analysis & Synthesis" 0 -1 1768459740647 ""}
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1768459740782 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768459740782 ""}
{ "Info" "ICUT_CUT_TM_SUMMARY" "7 " "Implemented 7 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "3 " "Implemented 3 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1768459740792 ""} { "Info" "ICUT_CUT_TM_OPINS" "2 " "Implemented 2 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1768459740792 ""} { "Info" "ICUT_CUT_TM_LCELLS" "2 " "Implemented 2 logic cells" { } { } 0 21061 "Implemented %1!d! logic cells" 0 0 "Design Software" 0 -1 1768459740792 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1768459740792 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 2 s Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 2 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "454 " "Peak virtual memory: 454 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768459740795 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 14:49:00 2026 " "Processing ended: Thu Jan 15 14:49:00 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768459740795 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768459740795 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:13 " "Total CPU time (on all processors): 00:00:13" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768459740795 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768459740795 ""}

二进制
Exp2Adder/db/ADDer.map.rdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.map_bb.cdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.map_bb.hdb 普通文件

二进制文件未显示。

查看文件

@ -0,0 +1 @@
v1

17
Exp2Adder/db/ADDer.pow.qmsg 普通文件
查看文件

@ -0,0 +1,17 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768459745308 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Power Analyzer Quartus Prime " "Running Quartus Prime Power Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768459745308 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 14:49:05 2026 " "Processing started: Thu Jan 15 14:49:05 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768459745308 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Power Analyzer" 0 -1 1768459745308 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_pow --read_settings_files=off --write_settings_files=off ADDer -c ADDer " "Command: quartus_pow --read_settings_files=off --write_settings_files=off ADDer -c ADDer" { } { } 0 0 "Command: %1!s!" 0 0 "Power Analyzer" 0 -1 1768459745308 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Power Analyzer" 0 -1 1768459745408 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768459745411 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768459745411 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "ADDer.sdc " "Synopsys Design Constraints File file not found: 'ADDer.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Power Analyzer" 0 -1 1768459745547 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Power Analyzer" 0 -1 1768459745547 ""}
{ "Info" "IPVA_PVA_START_CALCULATION" "" "Starting Vectorless Power Activity Estimation" { } { } 0 223000 "Starting Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768459745550 ""}
{ "Warning" "WPUTIL_PUTIL_NO_CLK_DOMAINS_FOUND" "" "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" { } { } 0 222013 "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" 0 0 "Power Analyzer" 0 -1 1768459745550 ""}
{ "Info" "IPVA_PVA_END_CALCULATION" "" "Completed Vectorless Power Activity Estimation" { } { } 0 223001 "Completed Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768459745550 ""}
{ "Info" "IPATFAM_USING_ADVANCED_IO_POWER" "" "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" { } { } 0 218000 "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" 0 0 "Power Analyzer" 0 -1 1768459745672 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Power Analyzer" 0 -1 1768459745688 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Power Analyzer" 0 -1 1768459745819 ""}
{ "Info" "IPAN_AVG_TOGGLE_RATE_PER_DESIGN" "0.000 millions of transitions / sec " "Average toggle rate for this design is 0.000 millions of transitions / sec" { } { } 0 215049 "Average toggle rate for this design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768459745905 ""}
{ "Info" "IPAN_PAN_TOTAL_POWER_ESTIMATION" "112.93 mW " "Total thermal power estimate for the design is 112.93 mW" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "" { Report "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "Compiler" "" "" "" "" { } "PowerPlay Power Analyzer Summary" } } } 0 215031 "Total thermal power estimate for the design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768459745916 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Power Analyzer 0 s 4 s Quartus Prime " "Quartus Prime Power Analyzer was successful. 0 errors, 4 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "904 " "Peak virtual memory: 904 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768459746000 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 14:49:05 2026 " "Processing ended: Thu Jan 15 14:49:05 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768459746000 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768459746000 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768459746000 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Power Analyzer" 0 -1 1768459746000 ""}

二进制
Exp2Adder/db/ADDer.pplq.rdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.pre_map.cdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.pre_map.hdb 普通文件

二进制文件未显示。

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.routing.rdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.rtlv.hdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.rtlv_sg.cdb 普通文件

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.rtlv_sg_swap.cdb 普通文件

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

查看文件

@ -0,0 +1 @@
DONE

50
Exp2Adder/db/ADDer.sta.qmsg 普通文件
查看文件

@ -0,0 +1,50 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768459746908 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768459746908 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 14:49:06 2026 " "Processing started: Thu Jan 15 14:49:06 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768459746908 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1768459746908 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta ADDer -c ADDer " "Command: quartus_sta ADDer -c ADDer" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1768459746908 ""}
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1768459746924 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1768459746965 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1768459746965 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768459746992 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768459746992 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "ADDer.sdc " "Synopsys Design Constraints File file not found: 'ADDer.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1768459747046 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768459747046 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768459747046 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768459747046 ""}
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1768459747046 ""}
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768459747046 ""}
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1768459747047 ""}
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1768459747048 ""}
{ "Info" "0" "" "Analyzing Slow 1200mV 85C Model" { } { } 0 0 "Analyzing Slow 1200mV 85C Model" 0 0 "Timing Analyzer" 0 0 1768459747048 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747049 ""}
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1768459747049 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747049 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747049 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747050 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747050 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747050 ""}
{ "Info" "0" "" "Analyzing Slow 1200mV 0C Model" { } { } 0 0 "Analyzing Slow 1200mV 0C Model" 0 0 "Timing Analyzer" 0 0 1768459747051 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1768459747063 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1768459747197 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768459747216 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768459747216 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768459747216 ""}
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768459747216 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747216 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747217 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747217 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747217 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747217 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747218 ""}
{ "Info" "0" "" "Analyzing Fast 1200mV 0C Model" { } { } 0 0 "Analyzing Fast 1200mV 0C Model" 0 0 "Timing Analyzer" 0 0 1768459747218 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768459747290 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768459747290 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768459747290 ""}
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768459747291 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747291 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747291 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747292 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747292 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459747292 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "setup " "Design is not fully constrained for setup requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768459747682 ""}
{ "Info" "ISTA_UCP_NOT_CONSTRAINED" "hold " "Design is not fully constrained for hold requirements" { } { } 0 332102 "Design is not fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768459747683 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "572 " "Peak virtual memory: 572 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768459747690 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 14:49:07 2026 " "Processing ended: Thu Jan 15 14:49:07 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768459747690 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768459747690 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768459747690 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1768459747690 ""}

二进制
Exp2Adder/db/ADDer.sta.rdb 普通文件

二进制文件未显示。

二进制文件未显示。

二进制
Exp2Adder/db/ADDer.tis_db_list.ddb 普通文件

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

查看文件

@ -0,0 +1,7 @@
start_full_compilation:s:00:00:13
start_analysis_synthesis:s:00:00:05-start_full_compilation
start_analysis_elaboration:s-start_full_compilation
start_fitter:s:00:00:02-start_full_compilation
start_assembler:s:00:00:01-start_full_compilation
start_timing_analyzer:s:00:00:02-start_full_compilation
start_eda_netlist_writer:s:00:00:01-start_full_compilation

二进制
Exp2Adder/db/ADDer.vpr.ammdb 普通文件

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

二进制文件未显示。

查看文件

@ -0,0 +1,29 @@
{
"partitions" : [
{
"name" : "Top",
"pins" : [
{
"name" : "sum",
"strict" : false
},
{
"name" : "cout",
"strict" : false
},
{
"name" : "a",
"strict" : false
},
{
"name" : "b",
"strict" : false
},
{
"name" : "cin",
"strict" : false
}
]
}
]
}

查看文件

@ -0,0 +1,153 @@
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Design Software" 0 -1 1768459539188 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus Prime " "Running Quartus Prime Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768459539188 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 14:45:39 2026 " "Processing started: Thu Jan 15 14:45:39 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768459539188 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768459539188 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off ADDer -c ADDer " "Command: quartus_map --read_settings_files=on --write_settings_files=off ADDer -c ADDer" { } { } 0 0 "Command: %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768459539188 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Analysis & Synthesis" 0 -1 1768459539273 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Analysis & Synthesis" 0 -1 1768459539273 ""}
{ "Warning" "WSGN_FILE_IS_MISSING" "Verilog3.v " "Can't analyze file -- file Verilog3.v is missing" { } { } 0 12019 "Can't analyze file -- file %1!s! is missing" 0 0 "Analysis & Synthesis" 0 -1 1768459542929 ""}
{ "Info" "ISGN_NUM_OF_DESIGN_UNITS_AND_ENTITIES" "ADDer.v 1 1 " "Found 1 design units, including 1 entities, in source file ADDer.v" { { "Info" "ISGN_ENTITY_NAME" "1 ADDer " "Found entity 1: ADDer" { } { { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 1 -1 0 } } } 0 12023 "Found entity %1!d!: %2!s!" 0 0 "Design Software" 0 -1 1768459542931 ""} } { } 0 12021 "Found %2!llu! design units, including %3!llu! entities, in source file %1!s!" 0 0 "Analysis & Synthesis" 0 -1 1768459542931 ""}
{ "Info" "ISGN_START_ELABORATION_TOP" "ADDer " "Elaborating entity \"ADDer\" for the top level hierarchy" { } { } 0 12127 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "Analysis & Synthesis" 0 -1 1768459542951 ""}
{ "Warning" "WMLS_MLS_STUCK_PIN_HDR" "" "Output pins are stuck at VCC or GND" { { "Warning" "WMLS_MLS_STUCK_PIN" "sum VCC " "Pin \"sum\" is stuck at VCC" { } { { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 6 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768459543056 "|ADDer|sum"} { "Warning" "WMLS_MLS_STUCK_PIN" "cout VCC " "Pin \"cout\" is stuck at VCC" { } { { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 8 -1 0 } } } 0 13410 "Pin \"%1!s!\" is stuck at %2!s!" 0 0 "Design Software" 0 -1 1768459543056 "|ADDer|cout"} } { } 0 13024 "Output pins are stuck at VCC or GND" 0 0 "Analysis & Synthesis" 0 -1 1768459543056 ""}
{ "Info" "IBPM_HARD_BLOCK_PARTITION_CREATED" "hard_block:auto_generated_inst " "Generating hard_block partition \"hard_block:auto_generated_inst\"" { { "Info" "IBPM_HARD_BLOCK_PARTITION_NODE" "0 0 0 0 0 " "Adding 0 node(s), including 0 DDIO, 0 PLL, 0 transceiver and 0 LCELL" { } { } 0 16011 "Adding %1!d! node(s), including %2!d! DDIO, %3!d! PLL, %4!d! transceiver and %5!d! LCELL" 0 0 "Design Software" 0 -1 1768459543084 ""} } { } 0 16010 "Generating hard_block partition \"%1!s!\"" 0 0 "Analysis & Synthesis" 0 -1 1768459543084 ""}
{ "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN_HDR" "3 " "Design contains 3 input pin(s) that do not drive logic" { { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "a " "No output dependent on input pin \"a\"" { } { { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 3 0 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1768459543093 "|ADDer|a"} { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "b " "No output dependent on input pin \"b\"" { } { { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 4 0 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1768459543093 "|ADDer|b"} { "Warning" "WCUT_CUT_UNNECESSARY_INPUT_PIN" "cin " "No output dependent on input pin \"cin\"" { } { { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 5 0 0 } } } 0 15610 "No output dependent on input pin \"%1!s!\"" 0 0 "Design Software" 0 -1 1768459543093 "|ADDer|cin"} } { } 0 21074 "Design contains %1!d! input pin(s) that do not drive logic" 0 0 "Analysis & Synthesis" 0 -1 1768459543093 ""}
{ "Info" "ICUT_CUT_TM_SUMMARY" "5 " "Implemented 5 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "3 " "Implemented 3 input pins" { } { } 0 21058 "Implemented %1!d! input pins" 0 0 "Design Software" 0 -1 1768459543094 ""} { "Info" "ICUT_CUT_TM_OPINS" "2 " "Implemented 2 output pins" { } { } 0 21059 "Implemented %1!d! output pins" 0 0 "Design Software" 0 -1 1768459543094 ""} } { } 0 21057 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "Analysis & Synthesis" 0 -1 1768459543094 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 9 s Quartus Prime " "Quartus Prime Analysis & Synthesis was successful. 0 errors, 9 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "358 " "Peak virtual memory: 358 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768459543096 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 14:45:43 2026 " "Processing ended: Thu Jan 15 14:45:43 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768459543096 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Elapsed time: 00:00:04" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768459543096 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:13 " "Total CPU time (on all processors): 00:00:13" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768459543096 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Analysis & Synthesis" 0 -1 1768459543096 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Analysis & Synthesis" 0 -1 1768459544016 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus Prime " "Running Quartus Prime Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768459544016 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 14:45:43 2026 " "Processing started: Thu Jan 15 14:45:43 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768459544016 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Fitter" 0 -1 1768459544016 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off ADDer -c ADDer " "Command: quartus_fit --read_settings_files=off --write_settings_files=off ADDer -c ADDer" { } { } 0 0 "Command: %1!s!" 0 0 "Fitter" 0 -1 1768459544016 ""}
{ "Info" "0" "" "qfit2_default_script.tcl version: #1" { } { } 0 0 "qfit2_default_script.tcl version: #1" 0 0 "Fitter" 0 0 1768459544031 ""}
{ "Info" "0" "" "Project = ADDer" { } { } 0 0 "Project = ADDer" 0 0 "Fitter" 0 0 1768459544031 ""}
{ "Info" "0" "" "Revision = ADDer" { } { } 0 0 "Revision = ADDer" 0 0 "Fitter" 0 0 1768459544031 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1768459544066 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1768459544066 ""}
{ "Info" "IMPP_MPP_USER_DEVICE" "ADDer 10M02SCM153C8G " "Selected device 10M02SCM153C8G for design \"ADDer\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1768459544070 ""}
{ "Info" "IMPP_MPP_BOOT_SEL_PIN_NOT_RESERVED" "" "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." { } { } 0 22896 "The CONFIG_SEL pin is disabled. It is not supported for MAX 10 devices with compact features." 0 0 "Fitter" 0 -1 1768459544082 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768459544082 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1768459544082 ""}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1768459544116 ""}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1768459544119 ""}
{ "Critical Warning" "WFCUDA_FCUDA_SPS_DEVICE_POWER_LIMITATION" "" "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." { } { } 1 16562 "Review the Power Analyzer report file (<design>.pow.rpt) to ensure your design is within the maximum power utilization limit of the single power-supply target device and to avoid functional failures." 0 0 "Fitter" 0 -1 1768459544136 ""}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M08SCM153C8G " "Device 10M08SCM153C8G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768459544137 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M04SCM153C8G " "Device 10M04SCM153C8G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1768459544137 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1768459544137 ""}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "7 " "Fitter converted 7 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TMS~ G1 " "Pin ~ALTERA_TMS~ is reserved at location G1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TMS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 19 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459544138 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TCK~ J1 " "Pin ~ALTERA_TCK~ is reserved at location J1" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TCK~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 21 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459544138 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDI~ H5 " "Pin ~ALTERA_TDI~ is reserved at location H5" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDI~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 23 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459544138 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDO~ H4 " "Pin ~ALTERA_TDO~ is reserved at location H4" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_TDO~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 25 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459544138 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCONFIG~ E8 " "Pin ~ALTERA_nCONFIG~ is reserved at location E8" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nCONFIG~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 27 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459544138 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nSTATUS~ D6 " "Pin ~ALTERA_nSTATUS~ is reserved at location D6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_nSTATUS~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 29 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459544138 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONF_DONE~ E6 " "Pin ~ALTERA_CONF_DONE~ is reserved at location E6" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { ~ALTERA_CONF_DONE~ } } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 31 14177 15141 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1768459544138 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1768459544138 ""}
{ "Info" "IFIOMGR_RESERVE_PIN_NO_DATA0" "" "DATA\[0\] dual-purpose pin not reserved" { } { } 0 169141 "DATA\[0\] dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768459544138 ""}
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "Data\[1\]/ASDO " "Data\[1\]/ASDO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768459544138 ""}
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "nCSO " "nCSO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768459544138 ""}
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "DCLK " "DCLK dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1768459544138 ""}
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1768459544139 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "ADDer.sdc " "Synopsys Design Constraints File file not found: 'ADDer.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1768459544254 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1768459544254 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1768459544254 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1768459544254 ""}
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1768459544254 ""}
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1768459544255 ""}
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1768459544255 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1768459544255 ""}
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768459544255 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1768459544256 ""}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768459544256 ""}
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1768459544256 ""}
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1768459544256 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1768459544256 ""}
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1768459544256 ""}
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1768459544256 ""}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1768459544256 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1768459544256 ""}
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:00 " "Fitter preparation operations ending: elapsed time is 00:00:00" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768459544258 ""}
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1768459544259 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1768459544458 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768459544465 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1768459544469 ""}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1768459544485 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768459544485 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1768459544703 ""}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X9_Y0 X18_Y8 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8" { } { { "loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X9_Y0 to location X18_Y8"} { { 12 { 0 ""} 9 0 10 9 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1768459544767 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1768459544767 ""}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1768459544774 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1768459544774 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1768459544774 ""}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768459544775 ""}
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.01 " "Total time spent on timing analysis during the Fitter is 0.01 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1768459544864 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768459544868 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768459544970 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1768459544970 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1768459545098 ""}
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:01 " "Fitter post-fit operations ending: elapsed time is 00:00:01" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1768459545269 ""}
{ "Warning" "WFIOMGR_FIOMGR_REFER_APPNOTE_447_TOP_LEVEL" "3 MAX 10 " "3 pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing MAX 10 Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." { { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "a 3.3-V LVTTL H11 " "Pin a uses I/O standard 3.3-V LVTTL at H11" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { a } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "a" } } } } { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 3 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 3 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768459545295 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "b 3.3-V LVTTL H12 " "Pin b uses I/O standard 3.3-V LVTTL at H12" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { b } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "b" } } } } { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 4 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 4 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768459545295 ""} { "Info" "IFIOMGR_PIN_IO_STANDARD_LOCATION" "cin 3.3-V LVTTL J12 " "Pin cin uses I/O standard 3.3-V LVTTL at J12" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" "" { PinPlanner "/home/lanshuye/altera_lite/25.1std/quartus/linux64/pin_planner.ppl" { cin } } } { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" "" { Assignment "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Assignment Editor.qase" 1 { { 0 "cin" } } } } { "ADDer.v" "" { Text "/home/lanshuye/Projects/DCExp/Exp2Adder/ADDer.v" 5 0 0 } } { "temporary_test_loc" "" { Generic "/home/lanshuye/Projects/DCExp/Exp2Adder/" { { 0 { 0 ""} 0 5 14177 15141 0 0 "" 0 "" "" } } } } } 0 169178 "Pin %1!s! uses I/O standard %2!s! at %3!s!" 0 0 "Design Software" 0 -1 1768459545295 ""} } { } 0 169177 "%1!d! pins must meet Intel FPGA requirements for 3.3-, 3.0-, and 2.5-V interfaces. For more information, refer to AN 447: Interfacing %2!s! Devices with 3.3/3.0/2.5-V LVTTL/LVCMOS I/O Systems." 0 0 "Fitter" 0 -1 1768459545295 ""}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "/home/lanshuye/Projects/DCExp/Exp2Adder/output_files/ADDer.fit.smsg " "Generated suppressed messages file /home/lanshuye/Projects/DCExp/Exp2Adder/output_files/ADDer.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1768459545305 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 7 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 7 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "1743 " "Peak virtual memory: 1743 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768459545461 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 14:45:45 2026 " "Processing ended: Thu Jan 15 14:45:45 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768459545461 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:02 " "Elapsed time: 00:00:02" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768459545461 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:02 " "Total CPU time (on all processors): 00:00:02" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768459545461 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1768459545461 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Fitter" 0 -1 1768459546338 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Assembler Quartus Prime " "Running Quartus Prime Assembler" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768459546338 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 14:45:46 2026 " "Processing started: Thu Jan 15 14:45:46 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768459546338 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Assembler" 0 -1 1768459546338 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_asm --read_settings_files=off --write_settings_files=off ADDer -c ADDer " "Command: quartus_asm --read_settings_files=off --write_settings_files=off ADDer -c ADDer" { } { } 0 0 "Command: %1!s!" 0 0 "Assembler" 0 -1 1768459546338 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Assembler" 0 -1 1768459546411 ""}
{ "Info" "IASM_ASM_GENERATING_POWER_DATA" "" "Writing out detailed assembly data for power analysis" { } { } 0 115031 "Writing out detailed assembly data for power analysis" 0 0 "Assembler" 0 -1 1768459546469 ""}
{ "Info" "IASM_ASM_GENERATING_PROGRAMMING_FILES" "" "Assembler is generating device programming files" { } { } 0 115030 "Assembler is generating device programming files" 0 0 "Assembler" 0 -1 1768459546472 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Assembler 0 s 1 Quartus Prime " "Quartus Prime Assembler was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "336 " "Peak virtual memory: 336 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768459546552 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 14:45:46 2026 " "Processing ended: Thu Jan 15 14:45:46 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768459546552 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768459546552 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768459546552 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Assembler" 0 -1 1768459546552 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Assembler" 0 -1 1768459547482 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Power Analyzer Quartus Prime " "Running Quartus Prime Power Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768459547483 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 14:45:47 2026 " "Processing started: Thu Jan 15 14:45:47 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768459547483 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Power Analyzer" 0 -1 1768459547483 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_pow --read_settings_files=off --write_settings_files=off ADDer -c ADDer " "Command: quartus_pow --read_settings_files=off --write_settings_files=off ADDer -c ADDer" { } { } 0 0 "Command: %1!s!" 0 0 "Power Analyzer" 0 -1 1768459547483 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Power Analyzer" 0 -1 1768459547556 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768459547559 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Power Analyzer" 0 -1 1768459547559 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "ADDer.sdc " "Synopsys Design Constraints File file not found: 'ADDer.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Power Analyzer" 0 -1 1768459547678 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Power Analyzer" 0 -1 1768459547678 ""}
{ "Info" "IPVA_PVA_START_CALCULATION" "" "Starting Vectorless Power Activity Estimation" { } { } 0 223000 "Starting Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768459547681 ""}
{ "Warning" "WPUTIL_PUTIL_NO_CLK_DOMAINS_FOUND" "" "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" { } { } 0 222013 "Relative toggle rates could not be calculated because no clock domain could be identified for some nodes" 0 0 "Power Analyzer" 0 -1 1768459547681 ""}
{ "Info" "IPVA_PVA_END_CALCULATION" "" "Completed Vectorless Power Activity Estimation" { } { } 0 223001 "Completed Vectorless Power Activity Estimation" 0 0 "Power Analyzer" 0 -1 1768459547681 ""}
{ "Info" "IPATFAM_USING_ADVANCED_IO_POWER" "" "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" { } { } 0 218000 "Using Advanced I/O Power to simulate I/O buffers with the specified board trace model" 0 0 "Power Analyzer" 0 -1 1768459547803 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Power Analyzer" 0 -1 1768459547815 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Power Analyzer" 0 -1 1768459547933 ""}
{ "Info" "IPAN_AVG_TOGGLE_RATE_PER_DESIGN" "0.000 millions of transitions / sec " "Average toggle rate for this design is 0.000 millions of transitions / sec" { } { } 0 215049 "Average toggle rate for this design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768459548015 ""}
{ "Info" "IPAN_PAN_TOTAL_POWER_ESTIMATION" "112.93 mW " "Total thermal power estimate for the design is 112.93 mW" { } { { "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "" { Report "/home/lanshuye/altera_lite/25.1std/quartus/linux64/Report_Window_01.qrpt" "Compiler" "" "" "" "" { } "PowerPlay Power Analyzer Summary" } } } 0 215031 "Total thermal power estimate for the design is %1!s!" 0 0 "Power Analyzer" 0 -1 1768459548025 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Power Analyzer 0 s 4 s Quartus Prime " "Quartus Prime Power Analyzer was successful. 0 errors, 4 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "899 " "Peak virtual memory: 899 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768459548109 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 14:45:48 2026 " "Processing ended: Thu Jan 15 14:45:48 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768459548109 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768459548109 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768459548109 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Power Analyzer" 0 -1 1768459548109 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Power Analyzer" 0 -1 1768459549005 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Timing Analyzer Quartus Prime " "Running Quartus Prime Timing Analyzer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768459549006 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 14:45:48 2026 " "Processing started: Thu Jan 15 14:45:48 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768459549006 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "Timing Analyzer" 0 -1 1768459549006 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_sta ADDer -c ADDer " "Command: quartus_sta ADDer -c ADDer" { } { } 0 0 "Command: %1!s!" 0 0 "Timing Analyzer" 0 -1 1768459549006 ""}
{ "Info" "0" "" "qsta_default_script.tcl version: #1" { } { } 0 0 "qsta_default_script.tcl version: #1" 0 0 "Timing Analyzer" 0 0 1768459549022 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Timing Analyzer" 0 -1 1768459549067 ""}
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "14 14 " "Parallel compilation is enabled and will use 14 of the 14 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Timing Analyzer" 0 -1 1768459549067 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768459549082 ""}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Timing Analyzer" 0 -1 1768459549082 ""}
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "ADDer.sdc " "Synopsys Design Constraints File file not found: 'ADDer.sdc'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Timing Analyzer" 0 -1 1768459549124 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768459549124 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768459549125 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768459549125 ""}
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Timing Analyzer" 0 -1 1768459549125 ""}
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768459549125 ""}
{ "Info" "0" "" "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" { } { } 0 0 "Found TIMING_ANALYZER_REPORT_SCRIPT_INCLUDE_DEFAULT_ANALYSIS = ON" 0 0 "Timing Analyzer" 0 0 1768459549125 ""}
{ "Info" "ISTA_NO_CLOCKS_TO_REPORT" "" "No clocks to report" { } { } 0 332159 "No clocks to report" 0 0 "Timing Analyzer" 0 -1 1768459549126 ""}
{ "Info" "0" "" "Analyzing Slow 1200mV 85C Model" { } { } 0 0 "Analyzing Slow 1200mV 85C Model" 0 0 "Timing Analyzer" 0 0 1768459549127 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549127 ""}
{ "Info" "0" "" "Can't run Report Timing Closure Recommendations. The current device family is not supported." { } { } 0 0 "Can't run Report Timing Closure Recommendations. The current device family is not supported." 0 0 "Timing Analyzer" 0 0 1768459549128 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549128 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549129 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549129 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549129 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549129 ""}
{ "Info" "0" "" "Analyzing Slow 1200mV 0C Model" { } { } 0 0 "Analyzing Slow 1200mV 0C Model" 0 0 "Timing Analyzer" 0 0 1768459549130 ""}
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Timing Analyzer" 0 -1 1768459549139 ""}
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Timing Analyzer" 0 -1 1768459549261 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768459549279 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768459549279 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768459549279 ""}
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768459549279 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "fmax " "No fmax paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549280 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549281 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549281 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549282 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549282 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549282 ""}
{ "Info" "0" "" "Analyzing Fast 1200mV 0C Model" { } { } 0 0 "Analyzing Fast 1200mV 0C Model" 0 0 "Timing Analyzer" 0 0 1768459549283 ""}
{ "Info" "ISTA_NO_CLOCK_FOUND_DERIVING" "base clocks \"derive_clocks -period 1.0\" " "No user constrained base clocks found in the design. Calling \"derive_clocks -period 1.0\"" { } { } 0 332142 "No user constrained %1!s! found in the design. Calling %2!s!" 0 0 "Timing Analyzer" 0 -1 1768459549356 ""}
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Timing Analyzer" 0 -1 1768459549356 ""}
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Timing Analyzer" 0 -1 1768459549357 ""}
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Timing Analyzer" 0 -1 1768459549357 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Setup " "No Setup paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549357 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Hold " "No Hold paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549358 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Recovery " "No Recovery paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549358 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Removal " "No Removal paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549358 ""}
{ "Info" "ISTA_NO_PATHS_TO_REPORT" "Minimum Pulse Width " "No Minimum Pulse Width paths to report" { } { } 0 332140 "No %1!s! paths to report" 0 0 "Timing Analyzer" 0 -1 1768459549358 ""}
{ "Info" "ISTA_UCP_CONSTRAINED" "setup " "Design is fully constrained for setup requirements" { } { } 0 332101 "Design is fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768459549741 ""}
{ "Info" "ISTA_UCP_CONSTRAINED" "hold " "Design is fully constrained for hold requirements" { } { } 0 332101 "Design is fully constrained for %1!s! requirements" 0 0 "Timing Analyzer" 0 -1 1768459549741 ""}
{ "Info" "IQEXE_ERROR_COUNT" "Timing Analyzer 0 s 5 s Quartus Prime " "Quartus Prime Timing Analyzer was successful. 0 errors, 5 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "564 " "Peak virtual memory: 564 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768459549748 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 14:45:49 2026 " "Processing ended: Thu Jan 15 14:45:49 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768459549748 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Elapsed time: 00:00:01" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768459549748 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:01 " "Total CPU time (on all processors): 00:00:01" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768459549748 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Timing Analyzer" 0 -1 1768459549748 ""}
{ "Info" "IQEXE_SEPARATOR" "" "*******************************************************************" { } { } 3 0 "*******************************************************************" 0 0 "Timing Analyzer" 0 -1 1768459550619 ""}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "EDA Netlist Writer Quartus Prime " "Running Quartus Prime EDA Netlist Writer" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition " "Version 25.1std.0 Build 1129 10/21/2025 SC Lite Edition" { } { } 0 0 "%1!s!" 0 0 "Design Software" 0 -1 1768459550619 ""} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jan 15 14:45:50 2026 " "Processing started: Thu Jan 15 14:45:50 2026" { } { } 0 0 "Processing started: %1!s!" 0 0 "Design Software" 0 -1 1768459550619 ""} } { } 4 0 "Running %2!s! %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768459550619 ""}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_eda --read_settings_files=off --write_settings_files=off ADDer -c ADDer " "Command: quartus_eda --read_settings_files=off --write_settings_files=off ADDer -c ADDer" { } { } 0 0 "Command: %1!s!" 0 0 "EDA Netlist Writer" 0 -1 1768459550619 ""}
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "EDA Netlist Writer" 0 -1 1768459550710 ""}
{ "Info" "IWSC_DONE_HDL_GENERATION" "ADDer.vo /home/lanshuye/Projects/DCExp/Exp2Adder/simulation/questa/ simulation " "Generated file ADDer.vo in folder \"/home/lanshuye/Projects/DCExp/Exp2Adder/simulation/questa/\" for EDA simulation tool" { } { } 0 204019 "Generated file %1!s! in folder \"%2!s!\" for EDA %3!s! tool" 0 0 "EDA Netlist Writer" 0 -1 1768459550730 ""}
{ "Info" "IQEXE_ERROR_COUNT" "EDA Netlist Writer 0 s 1 Quartus Prime " "Quartus Prime EDA Netlist Writer was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "586 " "Peak virtual memory: 586 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1768459550735 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Jan 15 14:45:50 2026 " "Processing ended: Thu Jan 15 14:45:50 2026" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1768459550735 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:00 " "Elapsed time: 00:00:00" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1768459550735 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:00 " "Total CPU time (on all processors): 00:00:00" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1768459550735 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768459550735 ""}
{ "Info" "IFLOW_ERROR_COUNT" "Full Compilation 0 s 27 s " "Quartus Prime Full Compilation was successful. 0 errors, 27 warnings" { } { } 0 293000 "Quartus Prime %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "EDA Netlist Writer" 0 -1 1768459551309 ""}