docs(piper): clarify leader/follower mode guidance for HIL flows

- document MasterSlaveConfig linkage_config semantics (0xFA/0xFC) in README

- update piper leader startup role command from 0xFA to 0xFC

- add inline note on commandability and power-cycle requirement after role switch

- align piper leader config comment with 0xFC startup role
这个提交包含在:
Elvin
2026-03-05 17:12:27 +08:00
父节点 b4482674ef
当前提交 df08db9005
共有 3 个文件被更改,包括 15 次插入 和 2 次删除

查看文件

@ -268,6 +268,14 @@ Recommendation: use **`fourcc: "MJPG"`** for OpenCV and **`warmup_s`** for RealS
#### AgileX PiPER
PiPER mode note (policy-sync / human-in-the-loop):
- Leader/follower linkage is configured via `MasterSlaveConfig(linkage_config, feedback_offset, ctrl_offset, linkage_offset)`.
- `linkage_config=0xFA`: teaching-input arm.
- `linkage_config=0xFC`: motion-output arm.
- `0xFA` is not suitable when the arm must accept external control commands. For policy execution + intervention switching, keep both teleop and robot arms in `0xFC`.
- After switching role mode (`0xFA` <-> `0xFC`), perform a full power-cycle before validation.
```bash
lerobot-human-inloop-record \
--robot.type=piper_follower \